Idinio Smart Plug 140180
Quick Start Guide
Introduction
Welcome to the Idinio Smart Plug, model 140180. This device allows you to control your home appliances remotely via your smartphone or tablet, enabling convenient automation of your daily routines.
Getting Started: Setup
Follow these steps to set up your Idinio Smart Plug:
- Download the App: Search for the "Idinio" app in your device's app store (iOS or Android) and install it.
- Create an Account: Open the Idinio app and follow the on-screen instructions to create a new account or log in if you already have one.
- Plug In the Device: Insert the Idinio Smart Plug into a standard wall socket. The indicator light should start blinking, indicating it's ready for pairing.
[Indicator light blinking ?]
- Add Device in App: In the Idinio app, tap the '+' icon to add a new device. Select "Smart Plug" from the list.
- Connect to Wi-Fi: Follow the app's instructions to connect the smart plug to your 2.4GHz Wi-Fi network. You will need your Wi-Fi password.
[Wi-Fi connection symbol ?]
- Name Your Plug: Once connected, you can assign a name to your smart plug (e.g., "Living Room Lamp") for easier identification and control.
Key Features
- Remote Control: Turn connected appliances on or off from anywhere using the Idinio app.
- Scheduling: Set custom schedules for your appliances to turn on or off automatically at specific times. [Clock icon ⏰]
- Voice Control: Compatible with popular voice assistants (e.g., Amazon Alexa, Google Assistant) for hands-free operation. [Microphone icon ?]
- Energy Monitoring: (If applicable) Track the energy consumption of connected devices.
- Away Mode: Simulate presence by randomly turning lights on and off when you're not home. [House with person icon ?]
Technical Specifications
| Specification | Details |
|---|---|
| Model Number | 140180 |
| Input Voltage | 230V ~ 50Hz |
| Max. Load Current | 16A |
| Max. Power | 3680W |
| Wi-Fi Standard | IEEE 802.11 b/g/n, 2.4GHz |
| Operating Temperature | 0°C to 40°C |
| Supported Systems | Android, iOS |
Safety Information
Please read the following safety precautions before use:
- For indoor use only.
- Ensure the connected appliance's power rating does not exceed the maximum load of the smart plug.
- Do not expose the device to water or moisture.
- Do not attempt to disassemble or repair the device yourself. [Wrench icon ?]
- Keep out of reach of children.
Troubleshooting
Cannot connect to Wi-Fi:
- Ensure you are using a 2.4GHz Wi-Fi network, as 5GHz is not supported.
- Check that your Wi-Fi password is entered correctly.
- Make sure the smart plug is within range of your Wi-Fi router.
- Try resetting the smart plug by holding the power button for 5 seconds until the indicator light blinks rapidly. [Power button symbol ▶️]
App not responding:
- Close and reopen the Idinio app.
- Check your internet connection.
- Ensure the smart plug is powered on and connected to Wi-Fi.
