Owner's Manual for Intesis models including: INMBSTOS001R000, INMBSTOS001R000 VRF and Digital Systems to Modbus RTU Interface, INMBSTOS001R000, VRF and Digital Systems to Modbus RTU Interface, Digital Systems to Modbus RTU Interface, to Modbus RTU Interface, Modbus RTU Interface, RTU Interface

Toshiba VRF and Digital systems to Modbus RTU Interface

Intesis gateway and installa on manual. Moun ng. DIN rail mount (bracket included), Wall mount. Housing Materials. Plas c. Warranty (years). 3 years. Packaging ...

Datasheet - INMBSTOS001R000

INMBSTOS001R000 | Intesis INMBSTOS00 IoT Gateway | RS

[PDF] Toshiba VRF and Digital systems to Modbus RTU Interface

The Toshiba-Modbus interface allows full bidirec onal communica on between Toshiba VRF and Digital air condi oner units and Modbus RTU (RS-485) networks.

PDF preview unavailable. Download the PDF instead.

A700000013971727
Toshiba VRF and Digital systems to Modbus RTU Interface
Item number: INMBSTOS001R000
The Toshiba-Modbus interface allows full bidirec onal communica on between Toshiba VRF and Digital air condi oner units and Modbus RTU (RS-485) networks. The interface acts as a server device for the installa on, accessing all signals from the air condi oner unit. A wired remote controller can also be part of the network.
Features and benefits
Modbus RTU (EIA-485) server device The interface acts as a Modbus server device through its Modbus RTU (EIA-485 connector) port. Energy savings through a window contact func on This func on helps minimize costs, as HVAC systems are a major building energy consumer. AC unit control by both the remote and Modbus RTU The AC unit can be simultaneously controlled by the manufacturer's remote controller and Modbus RTU. Mul ple moun ng op ons Moun ng op ons include DIN rail, wall, or, in some AC models, even inside the indoor unit.

Toshiba to Modbus RTU - 1 indoor unit
Dual configura on op ons Configura on is carried out through the interface's onboard DIP switches and the Modbus interface. Total unit control and monitoring from Modbus RTU Through internal variables, running hours counter (for maintenance purposes), and error indica on. No external power required The interface is powered directly from the AC unit, so no external power supply is required.

Page 1 of 4

Toshiba VRF and Digital systems to Modbus RTU Interface

General
Net Width (mm) Net Height (mm) Net Depth (mm) Net Weight (g) Packed Width (mm) Packed Height (mm) Packed Depth (mm) Packed Weight (g) Opera ng Temperature °C Min Opera ng Temperature °C Max Storage Temperature °C Min Storage Temperature °C Max Power Consump on (W) Input Voltage (V) Power Connector Configura on Capacity
Installa on Condi ons
AC Model Compa bility

53 58 93 95 14 8 10 101 -25 60 -40 85 1.19 14 VDC 2-pole ETS 1 Indoor unit. This gateway is designed to be mounted inside an enclosure. If the unit is mounted outside an enclosure, precau ons should always be taken to prevent electrosta c discharge to the unit. When working inside an enclosure (e.g., making adjustments, se ng switches, etc.), typical an -sta c precau ons should always be followed before touching the unit. Toshiba VRF and Digital systems

Page 2 of 4

Toshiba VRF and Digital systems to Modbus RTU Interface

General
Content of Delivery Moun ng Housing Materials Warranty (years) Packaging Material

Intesis gateway and installa on manual. DIN rail mount (bracket included), Wall mount Plas c 3 years Cardboard

Identification and Status

Product ID

INMBSTOS001R000

Country of Origin

Spain

HS Code

8517620000

Export Control Classifica on Number (ECCN)

EAR99

Physical Features

Connectors / Input / Output

EIA-485, HVAC port.

LED Indicators

Gateway and communica on status.

DIP & Rotary Switches

EIA-485 serial port configura on. Gateway se ngs.

Certifications and Standards

ETIM Classifica on

EC001604

WEEE Category

IT and telecommunica ons equipment

Page 3 of 4

Toshiba VRF and Digital systems to Modbus RTU Interface Use Case
Integra on example.
Page 4 of 4


PDFsharp 6.1.1