Haier H75P751UX 75-inch UHD Digital LED LCD TV User Manual

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings, install in accordance with the instructions.
8. Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protected the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lighting storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. Mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
15. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloth, curtains, etc.
16. No naked flame sources, such as lighted candles, should be placed on the apparatus.
17. Attention should be drawn to the environmental aspects of battery disposal.
18. The use of apparatus in moderate climate.
19. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
20. Warning: To avoid any injury caused by lean of the product, please always ensure the whole product was placed within the table surface in horizontal.

*Actual product may vary in appearance from above image*

⚠️ CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN!

⚠️ CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

⚡ The symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit.

ℹ️ The symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

Double Insulation Symbol This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts.

Recycling Symbol This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Precautions and Reminders

High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel.

Diagram showing a TV tipping over, warning against leaning or pushing it, especially concerning children. Serious injury may result if it falls.

Diagram showing a TV falling from an unstable surface. Serious injury to an individual, and damage to the television, may result if it falls.

Diagram showing a TV being exposed to rain/moisture, warning against electrical shock hazard.

Diagram showing objects being inserted into TV slots or liquid being spilled on the TV.

Diagram showing the TV unplugged from the AC outlet for extended periods.

Diagram showing ventilation openings on the back of the TV being blocked. Adequate ventilation is essential to prevent failure of electrical components.

Diagram showing the TV exposed to direct sunlight and heat sources, with a warning against placing naked flame sources like candles.

Diagram showing minimum clearance distances (e.g., 10cm, 20cm, 5cm) around the TV for ventilation.

Diagram showing the power supply cord trapped under the TV.

Note on cleaning: Unplug the TV, use soft fabric, no water, never chemicals.

Note on built-in compartments: Minimum distances must be maintained to prevent heat build-up, which can reduce service life and be dangerous.

Note on pixels: The product uses a panel consisting of sub pixels that require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

Preparation

IMPORTANT: Do not apply pressure to the screen display area which may compromise the integrity of the display. The manufacturer's warranty does not cover user abuse or improper installations.

Attaching the Stand

IMPORTANT: The stand of the TV must be assembled prior to usage.

1. Place TV unit face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the TV.
2. Fix the stand to the bottom of the TV with the 8 screws.

NOTE: The appearance of the product shall be in kind.

Diagram illustrating the attachment of the TV stand using screws.

Preparing Your LED TV for Wall Mounting

We suggest that you keep your TV at least 2.36 inches (60 mm) from the wall to prevent cable interference. Before mounting your TV on the wall, you need to remove the stand.

For your safety, please use only with a UL listed wall mount bracket with minimum weight of the TV without stand.

To attach a wall mount bracket to your TV:

1. Remove the screws holding your TV to the stand.
2. Remove the stand from your TV.
3. Secure the wall mount bracket to the back of your TV using four screws. Follow the instructions of the user manual that came with the wall mount bracket to install.

NOTE: The wall mount bracket are not included.

Diagram showing the back of the TV with screw holes for wall mount attachment.

Turning on the TV

1. Install the stand and place the TV on a solid surface.

2. Diagram showing the TV placed on a stand, with text notes about airflow, avoiding flames, and environmental exposure.

   Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing.

3. Connect the antenna cable or cable TV cable to the ANT IN aerial socket on the back of the TV set.
4. Power: Plug the cord into a working power outlet.
5. Turn the TV on: Press ? on the remote control or POWER button on the side control panel of the TV.

Peripheral Connection and Controls

Button Control

Diagram of the Haier TV remote control with numbered buttons.

In the standby mode, press the ? button to turn on the TV. In the boot state, long press the middle button to shut down.

• 1. Power (?): Press to turn the TV on or off. When your TV is off, power still flows through it. To completely disconnect power, unplug the power cord.
• 2. Source: Press to open the input source list.
• 3. Soft Keyboard: Press to open Soft Keyboard.
• 4. 0-9 number: Press to enter a TV channel number.
• 5. • (dot): Input the character "dot".
• 6. ?: Press to enter start a voice search.
• 7. Google Accounts: Switch Google accounts in Google TV mode.
• 8. OK (✅): Enter the selected option or perform the selected operation.
• 9. Navigation (⬆️⬇️⬅️➡️): Press to navigate the on-screen menu.
• 10. BACK (↩️): Return to the previous menu.
• 11. Home (?): Press to open the Home Page.
• 12. VOL+/VOL-: Press VOL+ or VOL- to adjust volume level.
• 13. MENU: Press to open or close the on-screen menu.
• 14. YouTube (▶️): Press to open the YouTube.
• 15. Prime Video (▶️): Press to prime video for viewing online TV shows and films (internet connection required). Implement the relevant operations according to the prompt at the bottom of the menu in the text.
• 16. Coloured buttons: Used for specific functions as indicated in menus.
• 17. MUTE (?): Press to open the mute.
• 18. MEDIA (?️): Press to open Media.
• 19. INFO (ℹ️): Press to display the channel information.
• 20. Dashboard: Press to open the Dashboard.
• 21. EPG: Press to display electronic programme guide in TV mode.
• 22. CH^/CHv: Press CH^ or CHv to change TV channels.
• 23. NETFLIX (?): Press to open the NETFLIX.
• 24. Shahid (?): Press to open the Shahid.

Accessories

• TV 75"
• Remote Control - 1pc
• AAA Battery - 2pcs
• User's Manual - 1pc
• Screws - 8 pcs

Peripheral Connection

Diagram showing the rear panel of the TV with various input/output ports labeled.

All the terminals are (from left to right): RJ45, OPTICAL, VIDEO, L, R, HDMI4, HDMI3, HDMI2, HDMI1 (ARC), LNB IN (SATELLITE), COMMON INTERFACE (CI), ANT IN (ANTENNA/CABLE), USB1, USB2, EARPHONE.

Making Connections

You can use the input terminals on TV set rear as follows.

Diagram showing connections for various devices like Amplifier, DVD Player, and other machines with HDMI or CVBS/S-Video interfaces.

Port Functions:

• 1. RF: Antenna/close circuit TV.
• 2. EARPHONE: Earphone output.
• 3. USB: Connect USB device.
• 4. HDMI: Connect to High-definition multimedia signal resource.
• 5. AV INPUT: Video input/Audio input.

AV Input Color Coding: Y Yellow (VIDEO), R Red (AUDIO-R), W White (AUDIO-L).

Operating Instructions

Initial Setup

The first time you turn on your TV, the setup wizard will guide you through setting up basic settings. Please follow the Text Tip for First Time Setup.

To enable Google Assistant mic on your remote control, press and hold the ⬅️ and ⬆️ buttons simultaneously for 5 seconds.

Screenshot of the 'Select your Wi-Fi network' screen.

Press ⬆️⬇️ to select the Wi-Fi to connect, press OK and enter the password to confirm the connection is successful.

This function is used for the remote control pair code. After the code is successful, you can use the Bluetooth remote control to operate the TV.

Screenshot of the 'Language' selection screen.

Press ⬆️⬇️ to select the system language and press OK to confirm the language.

Screenshot of the 'Select your region or country' screen.

Press ⬆️⬇️ to select the region/country of your device and press OK to confirm.

Screenshot of the 'Password' setup screen.

Used to set your device's password to ensure security and privacy.

Screenshot of the 'Input Password' screen with a numeric keypad.

Press OK to pop up the soft keyboard, and use the remote control to enter the 4-digit password automatically jump to the next interface.

Screenshot of the 'Confirm Password' screen.

Confirm the password again and keep it consistent. Use the remote control to enter the password and complete the password.

Screenshot of the 'Google TV' setup options: 'Set up Google TV' and 'Set up basic TV'.

Press ⬆️⬇️ to select the "Set up basic TV" of your device and press OK to complete the setup.

Select TV mode

Screenshot of the 'Select TV mode' screen showing 'Home' and 'Retail' options.

Home: "Home" mode is optimized for efficient energy usage for home use.

Retail: "Retail" mode is optimized to store demo with fixed settings.

For selecting the mode, press ⬆️⬇️ key to select Home mode and press "Yes".

Chromecast built-in

Let this device be detected as a Google Cast device and allow Google Assistant and other services to wake this device up to respond to Cast commands, even when on standby and the screen is off.

Select "On" to respond to cast commands, select "Off" to exit.

Tuner Mode

Screenshot of the 'Tuner Mode' selection screen.

Please select your tuner mode: Antenna, Cable, Satellite.

To select the Tuner mode for searching, press ⬆️⬇️ to select and press OK to confirm.

Use your Google Account Sign In

Screenshot of the Google Account sign-in screen.

Google Services

Screenshot of the Google Services screen, prompting to accept terms.

By accepting the Google Terms of Service to improve the product experience, select "Accept" to accept this condition.

Google Assistant

Illustration related to Google Assistant.

A few things you should know

Screenshot related to 'A few things you should know'.

Press ⬆️⬇️ to select and press OK to continue.

Home Screen

Screenshot of the Google TV Home screen showing various apps and content.

After completing the wizard Settings, you can watch TV and go to the home screen.

Navigating the On-Screen Menu

There are two ways to enter. First, in live TV, press the menu button to display TV options, press ⬆️⬇️ to select the settings menu and press OK to confirm.

Second, in the HOME interface, press the ⚙️ key to select the icon of the circular settings menu, press OK to confirm.

Screenshot showing TV options menu.

Screenshot showing the HOME interface with the settings icon highlighted.

Press ⬆️⬇️ button to select what you want set. Press OK to enter setting.

Choose your subscriptions

Screenshot of the 'Choose your subscriptions' screen with various streaming service logos.

Press ⬆️⬇️ to select the Choose your subscriptions and press OK.

Tuner Mode

Screenshot of the 'Tuner Mode' selection screen.

To select the Tuner mode for searching, press ⬆️⬇️ to select and press OK to confirm.

Installing your apps

Screenshot indicating app installation progress.

Press the next step Installing your apps.

Your Google TV experience is ready

Screenshot indicating Google TV experience is ready.

Your Google TV experience is ready and press OK to Start exploring.

Press BACK to return to the previous menu. If the main menu is displayed, pressing BACK will close the onscreen menu.

Operating Instructions (Continued)

Network

1. Press ⬆️⬇️ button to select what you want set.

2. Press OK button to adjust.

3. After finishing your adjustment, Press OK button to save and return to the previous menu.

Screenshot of the 'Network & Internet' settings screen.

Channel & Inputs

Press ⬆️⬇️ button to select "Channel & Inputs" set.

Screenshot of the 'Channels & Inputs' menu, showing 'Channels' and 'Inputs' options.

In the HOME interface, select the "Settings" icon, press OK to open the input source list, select the "Antenna".

Screenshot showing the 'Channels' menu with Antenna, Cable, Satellite options.

Antenna (Analog)

1. Menu->Settings->Channel & Inputs->Antenna-> Channels.
2. Enter Menu->Settings->Channel->Channels.
3. Channel Scan directly enters the automatic search platform interface.
4. Update Scan: Re-automatically search for frequency points outside the station.
5. Analog Manual Scan: Manual ATV search station. After input the frequency point, you can select up or down search station.

Screenshots illustrating the navigation for Analog channel setup.

Antenna (Antenna)

1. Menu->Settings->Channel->Channels.
2. Enter Menu->Settings->Channel->Channels.
3. Channel Scan directly enters the DTV automatic search platform interface of Antenna.
4. Update Scan: Re-automatically search for frequency points outside the station.
5. Single RF Scan: DTV manual search, left and right after selecting RF Channel, directly OK search.

Screenshots illustrating the navigation for Antenna channel setup.

Analog/Antenna/Cable/Satellite - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu.

Auto Channel Update - Press OK button to choose ON/OFF. When selecting ON, the system will automatically scan and update channels after 5 minutes of standby.

Channel Update Message - Press OK button to choose ON/OFF. When selecting ON, the system will show you the update message.

Operating Instructions (Continued)

Antenna (Cable)

1. Menu->Settings->Channel & Inputs->Antenna-> Channels.
2. Enter Menu->Settings->Channel->Channels-> Channel Scan.
3. Enter Channel Scan, where Akado, Divan TV, Online and Rostelecom (SPB) are the local operators, and the default Scan Mode is Advance; Others have Advance, Quick and Full Scan modes.
4. Single RF Scan: manual search station.

Screenshots illustrating the navigation for Cable channel setup.

Antenna (Satellite)

1. Menu->Settings->Channel->Channels.
2. Enter Menu->Settings->Channel->Channels-> Satellite Re-scan.
3. Press OK to enter Satellite parameter Settings, which include LNB POWER, LNB Frequency, DiSEqC Set, 22K and other parameters. Then return to Satellite re-scan and right click to enter the search menu.
4. Satellite Add: Add a star broadcast signal.
5. Satellite Manual Tuning: manually search for a certain TP which can be added by Satellite Add if needed.

Screenshots illustrating the navigation for Satellite channel setup.

Inputs

Screenshots showing the 'Inputs' menu with HDMI and Composite options.

Inputs - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu.

HDMI control - Press ⬆️⬇️ button to select the option then press OK button to choose ON/OFF.

Device auto power off - Press ⬆️⬇️ button to select the option then press OK button to choose ON/OFF.

TV auto power on - Press ⬆️⬇️ button to select the option then press OK button to choose ON/OFF.

HDMI EDID Version - show EDID version.

CEC Device List - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu.

Display & Sound

Press ⬆️⬇️ button to select "Display & Sound" set.

Screenshots showing 'Display & Sound' menu options like Picture, Screen, Sound, Audio Output.

Screenshots showing 'Picture' settings like Contrast, Picture Mode, Energy Saving, Backlight, Saturation, HUE, Brightness, Sharpness.

Operating Instructions (Continued)

Picture

Picture Mode - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu. (Optional: user, Standard, Vivid, Sport, Movie, Game, Energy saving).

Dialogue Enhancer - Press ⬆️⬇️ button to select the option then press OK button to choose Off/Low/Medium/High.

Backlight/Brightness/Contrast/Saturation/HUE/Sharpness - Press ⬆️⬇️ button to select the option. Press ⬅️ to decrease the parameter. Press ➡️ to increase the parameter.

Auto Backlight - Press ⬆️⬇️ button to select the ON/OFF.

Advanced Video - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu.

Reset to Default - Reset all settings to the factory defaults.

Sound

Dolby Audio processing - Press ⬆️⬇️ button to select the option then press OK button to choose ON/OFF.

Sound style - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu. (Optional: user, Standard, Night, Sports, Movie, Music, News).

Balance/Bass/Treble - Press ⬆️⬇️ button to select the option. Press ⬅️ to decrease the parameter. Press ➡️ to increase the parameter.

dbx-tv - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu.

Sound Surround - Press ⬆️⬇️ button to select the option then press OK button to choose ON/OFF.

Equalizer Detail - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu.

Speakers - Press ⬆️⬇️ button to select the option then press OK button to choose Auto/OFF.

Speaker Delay - Press ⬆️⬇️ button to select the option. Press ⬅️ to decrease the parameter. Press ➡️ to increase the parameter.

eARC - Press ⬆️⬇️ button to select the option, then press OK button to choose Auto/OFF.

Auto Volume Control - Press ⬆️⬇️ button to select the option then press OK button to choose ON/OFF.

Downmix Mode - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu. (Optional: Stereo, Surround).

Audio Output

Screenshots showing 'Audio Output' settings.

In this menu, you can read the information and settings of Audio Output.

1. Press ⬆️⬇️ button to select what you want set.

2. Press OK button to adjust.

3. After finishing your adjustment, Press BACK button to return to the previous menu.

Digital Output - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu. (Optional: Auto, Bypass, PCM Dolby Digital Plus, Dolby Digital).

Digital Output Delay - Press ⬆️⬇️ button to select the option. Press ⬅️ to decrease the parameter. Press ➡️ to increase the parameter.

Accounts & Sign in

Screenshots showing 'Accounts & Sign In' and 'Privacy' settings.

In this menu, you can read the information and settings of Privacy.

1. Press ⬆️⬇️ button to select what you want set.

2. Press OK button to adjust.

3. After finishing your adjustment, Press BACK button to return to the previous menu.

Operating Instructions (Continued)

Apps

Screenshots showing 'Apps' and 'About' menus.

In this menu, you can set the APP permissions, and read the app lists.

1. Press ⬆️⬇️ button to select what you want set.

2. Press OK button to adjust.

3. After finishing your adjustment, press BACK button to return to the previous menu.

About

In this menu, you can System update, Factory reset and read the information of TV.

Date & Time

Automatic date & time - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu. (Optional: Use network-provided time, Off)

NOTE: Manually adjusting date time settings will automatically change the Automatic date time to OFF.

Set date - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu.

Set time - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu.

Set time zone - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu.

Use 24-hour format - Press ⬆️⬇️ button to select the option then press OK button to choose ON/OFF.

Accessibility

Captions - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu.

High contrast text - Press ⬆️⬇️ button to select the option then press OK button to choose ON/OFF.

Text to speech - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu.

Accessibility shortcut - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu.

SERVICES - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu.

Language

Language - Press ⬆️⬇️ button to select the option then press OK button to enter the select language.

Operating Instructions (Continued)

Keyboard

Current keyboard - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu.

Gboard Settings - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu.

Manage keyboards - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu.

Screenshots showing Keyboard settings.

Storage

Internal shared storage - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu.

KINGSTON - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu.

Screenshots showing Storage information.

Ambient mode

In this menu, you can read the information and settings of Ambient mode.

1. Press ⬆️⬇️ button to select what you want set.

2. Press OK button to adjust.

3. After finishing your adjustment, Press BACK button to return to the previous menu.

Screenshots showing Ambient mode settings like Weather, Time, Google Photos.

Power & Energy

In this menu, you can set Power on behavior, Energy saver, Power, Timer.

1. Press ⬆️⬇️ button to select what you want set.

2. Press OK button to adjust.

3. After finishing your adjustment, Press BACK button to return to the previous menu.

Screenshots showing Power & Energy settings.

Cast

Press ⬆️⬇️ button to select the option then press OK button to choose Always/While casting/Never.

Screenshot of Cast settings.

System sounds

Press ⬆️⬇️ button to select the option then press OK button to choose ON/OFF.

Screenshot of System sounds settings.

Retail Mode

Retail mode - Press ⬆️⬇️ button to select the option then press OK button to choose ON/OFF.

Retail messaging - Press ⬆️⬇️ button to select the option then press OK button to enter the sub-menu. (Note: Demo video, e-POP left, e-POP bottom)

Screenshots showing Retail Mode settings.

Operating Instructions (Continued)

Factory reset

Press OK button to enter the sub-menu. Reset - Erase everything.

Screenshots of the Factory reset confirmation screen.

Add and Use of Multimedia Player

Screenshot showing the 'Your apps' screen with the Multimedia Player highlighted.

1. In the HOME interface, select the icon in the APP column to add the application, and click OK. Press up and down to select the Multimedia Player application, and click OK to add it to the HOME interface.

Screenshot showing the Multimedia Player interface with Video, Photo, Music, All options.

2. Select OK key to enter Multimedia Player and display Video, Photo, Audio. After inserting the USB flash drive, you can view the corresponding files in the USB flash drive (FAT32 Format).

NOTE: The menu may be different depending on when you purchased the TV.

Remotes & Accessories

Screenshot showing 'Searching for accessories...' and paired devices.

In this menu, you can pair Bluetooth devices.

1. Press the ⬅️ and ⬆️ buttons at the bottom of the remote control for 5 seconds.

2. When the LED starts to flash, release it. The remote controller will send the pairing signal to the TV and display the information of the remote control on the right side of the screen.

3. Press the OK button to display the pairing. If the paired is displayed, the connection is successful.

4. If "couldn't pair" appears, the connection fails. Wait 30 seconds and then press the ⬅️⬅️ and ⬆️⬆️ buttons at the bottom of the remote control for 5 seconds to repeat the previous steps.

5. Press ⬅️ button return to the previous menu.

Hands Free Voice Control

Diagram showing the 'Hands free voice indicator' and the switch.

Hands free voice Switch off/on.

Switch to the left to open the Hands free Voice Control, and to the right to close.

1. Move the switch toward the center of the screen. (Open by default)

Screenshots showing voice assistant interaction examples (weather, movie search).

2. Operate the remote control and click the microphone icon. Select settings > Google assistant, and select sign in or use assistant without sign in → Allow.

3. Continue to click the microphone icon to conduct voice interaction through the wake-up word "Ok Google".

4. Click the microphone icon again. When the prompt "Google assistant is not ready!" is prompted, the system starts the voice module. After the prompt disappears, it can be used. For example, when we say "Ok Google, weather", Hands free voice indicator will light up and feed back the weather conditions.

NOTE: This feature requires network support. When the network fails or is restricted, try manually setting the current network date and time.

Supported Far Field Assistant locales: en-US/es-US, fr-FR, es-ES, ja-JP, ko-KR, de-DE, it-IT, en-GB, en-AU, en-IN/hi-IN, en-CA/fr-CA, es-MX, pt-BR, id-ID, sv-SE, vi-VN.

Troubleshooting

Please make these simple checks before calling service. These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty.

NOTE: This product uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

Dolby Vision Atmos

Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 2012–2022 Dolby Laboratories. All rights reserved.

Product Specification

* The part specifications of this TV set provided here are for reference only. Differences may occur as product technology is updated. Design and specifications are subject to change without notice.

Document metadata: Material 80g writing paper, Black and white printing, Saddle stitch. Date: 2023. 3. 31.