Haier LED LCD TV

Safety and Warnings

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings; install in accordance with the instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. The mains plug is used as the disconnect device; the disconnect device shall remain readily operable.
15. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloth, curtains, etc.
16. No naked flame sources, such as lighted candles, should be placed on the apparatus.
17. Attention should be drawn to the environmental aspects of battery disposal.
18. The use of apparatus in moderate climate.
19. The apparatus shall not be exposed to dripping or splashing, and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
20. Warning: To avoid any injury caused by the product leaning, please always ensure the whole product is placed on a table surface horizontally.

[CAUTION] RISK OF ELECTRIC SHOCK DO NOT OPEN! [CAUTION] TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The symbol [⚡] indicates that dangerous voltages constituting a risk of electric shock are present within this unit.

The symbol [?] indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

This symbol [Double Insulation] indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing, use only identical replacement parts.

This marking [Recycle Symbol] indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Illustrations of unsafe practices:

• Diagram showing a person leaning on or pushing the TV, with a warning about serious injury to children if it falls.
• Diagram showing the TV exposed to rain or moisture, with a warning against fire or electrical shock hazard.
• Diagram showing the TV on an unstable cart, stand, shelf, or table, with a warning about serious injury and damage if it falls.
• Diagram showing objects being dropped or pushed into TV cabinet slots or openings, and liquid being spilled on the TV.
• Diagram showing the AC power cord trapped under the TV.
• Diagram showing ventilation holes in the back cover blocked by items like newspapers or curtains.
• Diagram showing naked flame sources, like lighted candles, placed on the TV.

Safe Installation Distances:

Diagram illustrating recommended minimum distances for installation: 10cm (sides), 10cm (top), 20cm (back), 5cm (bottom). Text notes that maintaining these distances is crucial for heat build-up, service life, and safety, especially when built into compartments.

Introduction

Main Features

• Used as Television, display terminal, PC display.
• High luminance, wide viewing angle.
• Can store Air and Cable TV programs.
• HDMI interface.
• Multi-Media player (USB).

Accessories

• Remote Controller: 1
• Battery (AAA): 2
• User's Manual: 1

Main Parameter

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Wall Mount Installation

Step One: Use the expansion bolts (4*36PWA) to fix the wall mount brackets into the wall.

Step Two: Fix the wall mount screws (M6x12mm/4pcs) into the rear side of the LCD TV, using a torque of 8kgf.cm. (Note: TV appearance is subject to material object.)

Step Three: Place the LCD TV with wall mount screws onto the wall mount brackets. Warning: The angle between the TV and the wall must not be bigger than 3°.

Installation

Front Panel

The front panel features:

• 1: Remote control sensor.
• 2: Indicator LED: RED [STANDBY].
• 3: Key board.

Middle key: In standby mode, press the middle button to turn on the TV. In the boot state, long press the middle button to shut down. Under the menu page, it functions as the OK key.

Left and right keys: In the non-menu page, press left/right keys to adjust volume. Under the menu page, press left/right keys to adjust volume addition and subtraction.

Up and down keys: In the non-menu page, you can adjust the TV channel. Under the menu page, you can move the cursor up and down.

REAR AV Connections (SIDE)

The terminals on the side rear are (from left to right): HDMI4 (ARC), LNB IN, ANT IN, Mini YPbPr, EARPHONE, CI, TF, USB2.

REAR AV Connections

The terminals on the rear are (from left to right): OPTICAL output, USB1, RJ45, HDMI1, HDMI2, HDMI3, VIDEO, AUDIO input (L/R).

Note: VIDEO and YPbPr share one audio channel. When an HDMI port receives a DVI signal, the audio signal is received from the AV Audio channel.

Antenna

Note: Aerial connections use an IEC (female) connector. Input impedance is 75Ω unbalanced.

Diagram: Shows connection of an outdoor antenna or indoor antenna (CATV net) via a twin-lead feeder (300Ω) and an adaptor (not supplied) to the TV's ANT terminal. It illustrates loosening screws, inserting wires, and tightening screws.

Preset Mode (HDMI)

AV Equipment

This TV provides AV and YPbPr inputs for connecting VCR, DVD, or other video equipment. Refer to the equipment's owner's manual for connection details.

Diagram: Illustrates connections for various AV equipment. It shows connections for HDMI, LNB IN, ANT IN, Mini YPbPr, EARPHONE, CI, TF, USB2 on the side rear, and OPTICAL, USB1, RJ45, HDMI1-3, VIDEO, AUDIO (L/R) on the main rear panel. It details connections for video equipment with YPbPr inputs and audio receivers, specifying color-coded inputs (Yellow for video, Red for audio R, White for audio L, Red for Pr/Cr, Blue for Pb/Cb, Green for Y).

Notes:

• AV and YPbPr share one audio channel.
• When an HDMI port receives a DVI signal, the 'AV Audio' channel is used for audio.
• Some devices may not be supported due to non-standard signals.

Remote Control

The remote control has the following functions:

Remote Model: Haier HTR-U29S

Battery Installation: Remove the battery compartment cover. Insert 2 supplied AAA 1.5V batteries.

Operation

Initial Setup

The first time you turn on your TV, a setup wizard will guide you through basic settings.

Remote Control Pairing: This function is used for the remote control pair code. After successful pairing, you can use the Bluetooth remote control to operate the TV.

Google Services:

• Accept Google's Terms of Service to improve the product experience.
• Agree to Google for location information to get more features.
• Automatically send diagnostic information to Google to improve performance.

Quick TV Setup with Android Phone: You can transfer your Android phone's Wi-Fi network and Google Account to your TV. Choose 'Continue' to connect or 'Skip' to skip this step.

Wi-Fi Network Setup: Select your Wi-Fi network, enter the password, and press OK to connect.

Country/Region: Select your country/region and press OK.

Password Setup: Set a password for security and privacy.

Home Screen

After completing the wizard, you can watch TV and access the home screen. The home screen displays apps, trending content, and navigation options.

Navigation:

• [Google Assistant Icon]: Open the Google Assistant or start a voice search.
• [Apps Icon]: Jump to the Apps screen to view all installed applications.
• [Notification Icon]: Display notifications.
• [Inputs Icon]: Select an input source.
• [Network Icon]: Set up Network, such as Wi-Fi.
• [Settings Icon]: Access various settings.

Input Source Selection:

1. From the HOME interface, navigate to the 'Inputs' icon, press OK, then select the desired input and press OK to switch.
2. Under live TV, press the SOURCE button to display the list of input sources and select the desired one.

Navigating the On-Screen Menu

You can access menus in two ways:

1. In live TV, press the MENU button, navigate to the settings menu using [UP]/[DOWN] arrows, and press OK.
2. From the HOME interface, select the circular settings icon [Settings Icon] and press OK.

Use [UP]/[DOWN]/[LEFT]/[RIGHT] arrows to select options and OK to confirm or enter sub-menus.

Channels

• Channel Installation Mode: Select signal type (Antenna, Cable, Preferred Satellite/General Satellite).
• Antenna: For analog and digital (DVB-T/T2) broadcasting.
• Cable: For analog and QAM broadcasting.
• Satellite: For satellite broadcasting signals.
• Auto Channel Update: Automatically scan and update channels after standby.
• Parental Controls: Set parental restrictions.
• Audio Channel: Select audio channel preferences.
• Open Source Licenses: View open source licenses.

Antenna Setup

Channel Installation Mode: Select Antenna.

Channels: Access channel scan options.

Scan Modes: Options include Advance, Quick, and Full Scan, depending on the operator.

Single RF Scan: Manual DTV search.

Analog Manual Scan: Manual ATV search.

Cable Setup

Channel Installation Mode: Select Cable.

Channels: Scan all channels, including Analog and Digital.

Scan Single RF Channel (Digital Only): Scan for digital channels with specific frequency settings.

Satellite Setup

Channel Installation Mode: Select Satellite.

Satellite Add: Add a star broadcast signal.

Satellite Re-scan: Re-scan for satellite channels.

Satellite Manual Tuning: Manually search for a specific TP (transponder) to add.

Satellite Detail: View satellite status, name, LNB power, frequency, DiSEqC settings, etc.

Picture Settings

Navigate to Picture settings using the remote control.

• Picture Mode: Select from user, Standard, Vivid, Sport, Movie, Game, Energy saving.
• Backlight/Brightness/Contrast/Saturation/HUE/Sharpness: Adjust these parameters using [UP]/[DOWN] arrows.
• Gamma: Select Dark, Middle, or Bright.
• Color Temperature: Adjust color temperature settings.
• Advanced Video: Access advanced video settings.
• Reset to Default: Reset all picture settings to factory defaults.

Sound Settings

Navigate to Sound settings.

• Sound Style: Select from user, Standard, Vivid, Sports, Movie, Music, News.
• Balance/Bass/Treble: Adjust these audio parameters.
• Sound Surround: Turn surround sound on or off.
• Equalizer Detail: Access detailed equalizer settings.
• Speakers: Select TV Speaker or External Audio System.
• Digital Output: Select output format (Auto, Bypass, PCM, Dolby Digital Plus, Dolby Digital).
• SPDIF Delay: Adjust SPDIF delay.
• Auto Volume Control: Turn auto volume control on or off.
• Downmix Mode: Select Stereo or Surround.
• Reset to Default: Reset all sound settings to factory defaults.

Storage

View device storage and removable storage information.

• Internal shared storage: Displays total space available.
• Removable storage: Displays space on connected USB storage devices.

Retail Mode

Configure retail-specific settings.

• Retail Mode: Turn retail mode on or off.
• Retail Messaging: Configure demo video and e-POP settings.
• PQ Demo: Set picture quality demo options (OFF, LEFT, RIGHT).

Google Settings

Manage Google-related settings.

• Accounts: View and manage accounts.
• Searchable apps: Select apps to include in search results.
• SafeSearch filter: Enable or disable safe search.
• Block offensive words: Block inappropriate language.
• Open source licenses: View open source licenses.

Chromecast Built-in

Access Chromecast settings, including About, Open source licenses, and Version number.

Usage & Diagnostics

Enable or disable automatic sending of diagnostic information to Google.

Accessibility

Configure accessibility features:

• Audio Description: Turn audio description on or off.
• Visually Impaired: Settings for visually impaired users (requires Audio Description).
• Hearing Impaired: Turn hearing impaired features on or off.
• Captions: Configure closed captions.
• High contrast text: Enable high contrast text (experimental).

Reset

Press OK to enter the sub-menu for factory reset (Erase everything).

Remote & Accessories

Add accessories and manage remote controls. Instructions are provided for pairing Bluetooth remotes.

Add and Use of Multi Media Player

Access the Multi Media Player from the Apps menu to play video, photo, and audio files from a USB drive.

Trouble Shooting

This table lists common picture and audio issues and their potential solutions:

Special Explanation: Accessories such as the remote control are not covered by the guarantee.