JBL ENDURANCE PEAK

1. What's in the Box

The package includes:

• Left Earbud
• Right Earbud
• Charging Case
• Ear Tips (S, M, L)
• Enhancers
• Charging Cable
• Warranty Card, Warning Card, Safety Sheet, QSG

2. Overview

2.1 Touch Control Panel & LEDs

Note: All touch controls are on the right earbud.

The earbuds feature touch-sensitive panels for control. LEDs indicate the status of the earbuds and charging.

2.2 Charging

Fully charge the earbuds and the charging case before the first use. The charging case is solely for charging the earbuds.

a. Charging the Case

Connect the charging case to a power source using the provided USB cable. The LEDs on the case indicate the charging status:

• Flashing LEDs: Less than 25%
• Slowly flashing LEDs: 25%-50%
• Moderately flashing LEDs: 50%-75%
• Rapidly flashing LEDs: 75%-99%
• Solid LEDs: 100% (Fully Charged)

b. Charging the Earbuds

Place the earbuds into the charging case. The earbuds will begin charging automatically. The charging time is approximately 2 hours.

3. Wearing the Headphone

3.1 Select the Ear Tips

Choose the ear tip size (S, M, L) that provides the most comfortable and secure fit.

3.2 Attach the Enhancers and Ear Tips

Attach the selected enhancers and ear tips onto the earbuds.

3.3 TWISTLOCK™ Technology

To wear the earbuds: Insert them downwards into your ear. Twist backwards to lock them in place. Adjust for comfort.

4. POWERHOOK™: Automatic Power On/Off

4.1 Powering On and Pairing (Right Earbud)

Take the right earbud out of the charging case and unhook the POWERHOOK™. The earbud will power on and enter device pairing mode.

4.2 Powering On and Connecting (Left Earbud)

Take the left earbud out of the charging case. It will power on and automatically connect with the right earbud.

4.3a Standby Mode

The earbuds can remain in standby mode for up to 3 hours without returning them to the charging case. Beyond this period, they must be returned to the case for charging.

4.3b Powering Off

To completely power off the earbuds, return them to the charging case.

5. Bluetooth Pairing

5.1 Automatic Pairing

If connecting for the first time, the earbuds will automatically enter Bluetooth pairing mode after being powered on.

5.2 Manual Pairing

To pair with a new device: Tap the touch control panel on the right earbud once, tap again, and then hold for 5 seconds.

6. Controlling Music

Use the touch controls on the right earbud:

• Tap once: Play/Pause Music
• Tap twice: Next Track
• Tap three times: Previous Track

7. Managing Phone Calls

Use the touch controls on the right earbud:

• Tap once: Answer/End Call
• Tap twice: Reject Incoming Call

8. Mono Mode

Use only the right earbud and place the left earbud back into the charging case.

9. Factory Reset

9.1 Initial Step

Place both the left and right earbuds into the charging case until the red LEDs turn on.

9.2 Reset Procedure

Tap the touch panel on the right earbud once, then immediately tap again (within 1 second) and hold for 10 seconds until the red LED flashes.

10. Waterproof

10.1 Water Resistance

The earbuds are water-resistant for up to 30 minutes in 1 meter of water.

10.2 Important Note

Do not put the earbuds in the charging case when they are wet.

11. LED Behaviour

The LEDs on the earbuds and charging case indicate various statuses:

• Red LED (Solid): Charging
• Red LED (Flashing): Low Battery
• Blue LED (Solid): Connected (TWS or Bluetooth)
• Blue LED (Flashing): Pairing Mode
• LED Off: Fully Charged / Powered Off

12. Specifications

• Model: ENDURANCE PEAK
• Bluetooth Version: 4.2
• Support: A2DP V1.3, AVRCP V1.5, HFP V1.6
• Headset Battery Type: Lithium-ion polymer (3.7V, 75mAh)
• Bluetooth Transmitter Power: < 10dBm
• Bluetooth Transmitter Frequency Range: 2.402 – 2.480GHz
• Bluetooth Transmitter Modulation: GFSK, π/4 DQPSK, 8DPSK
• Dynamic Drivers: 10mm
• Frequency Response: 16 – 22 kHz
• Charging Case Battery: 3.7V, 1,500mAh
• Earbuds Battery Life: Up to 4 hours
• Charging Time: < 2 hours
• Compatibility: Phones, Tablets, Computers