Waterproof True Wireless In-Ear Sport Headphones
The JBL Endurance Peak package includes:
All touch controls are located on the Master Earbud (R).
Before first use, fully charge both earbuds and the charging case. The charging case is designed exclusively for charging the earbuds.
Connect the charging cable to the case. The LEDs on the case indicate the battery level:
Charging time: Approximately 2 hours.
Place the earbuds into the charging case. The LED on each earbud indicates its charging status:
Charging time: Approximately 2 hours.
The earbuds can remain in standby mode for up to 3 hours without being returned to the charging case. After this period, they must be placed back in the case for charging.
To completely power off the earbuds, return both earbuds to the charging case.
When powered on for the first time, the earbuds will automatically enter Bluetooth pairing mode.
To pair with a new device, tap the touch control panel on the Master Earbud (R) once, then tap again and hold for 5 seconds. The earbud will enter pairing mode.
Use the touch control panel on the Master Earbud (R) for music playback:
Use the touch control panel on the Master Earbud (R) for call management:
To use only one earbud, take out the Master Earbud (R) and leave the Slave Earbud (L) in the charging case. The Master Earbud will operate independently.
The JBL Endurance Peak headphones are IPX7 waterproof, making them suitable for use in all weather conditions and resistant to sweat. They are durable and built to last.
Do not place the earbuds into the charging case if they are wet. Ensure they are dry before charging to prevent damage.
The LED indicators on the earbuds and charging case provide information about their status:
LED State | Meaning (L/R Earbud) |
---|---|
On | Power on/off |
Slow Blinking | Low battery |
Solid | Charging |
Off | Fully charged |
Fast Blinking | TWS pairing / Bluetooth pairing (R) |
Solid | TWS connected / Bluetooth connected (R) |
This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
The Directive on Waste Electrical and Electronic Equipment (WEEE), effective since 14/02/2014, mandates changes in the treatment of electrical equipment at end-of-life. This product should not be disposed of with general household waste. For proper treatment, recovery, and recycling, take these products to designated collection points. Proper recycling helps conserve natural resources and ensures human health and environmental safety. For more information, contact your local city center, household waste disposal service, or the manufacturer.
Symbol: Crossed-out wheeled bin ☒
This product complies with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
A new battery directive 2013/56/EU came into force on 01/07/2015, applying to all types of batteries and accumulators. It sets rules for collection, treatment, recycling, and disposal of batteries, aiming to prohibit hazardous substances and improve environmental performance. It is illegal to dispose of any battery with household trash in the European Union. All batteries must be disposed of in an environmentally sound manner. Contact local waste-management officials for information.
WARNING: Danger of explosion if battery is incorrectly replaced. To reduce risk of fire or burns, do not disassemble, crush, puncture, short external contacts, expose to temperature above 60°C (140°F), or dispose of in fire or water. Replace only with specified batteries.
Symbol: Crossed-out wheeled bin ☒ for batteries and accumulators.
HARMAN International declares this equipment complies with Directive 2014/53/EU and RoHS 2011/65/EU. The declaration of conformity can be consulted on the JBL website: www.jbl.com.
This equipment is approved by ANATEL, in accordance with Resolution 242/2000, and meets applicable technical requirements. For more information, consult the ANATEL website: http://www.anatel.gov.br.
Ingram Micro Pty Limited, an authorized distributor of Harman International Industries Ltd products, provides a warranty against defects for products distributed within Australia after April 1, 2016. Harman products come with guarantees that cannot be excluded under the Australian Consumer Law. During the warranty period, manufacturing defects will be repaired or replaced without charge. For claims, contact the seller or Harman customer support at +61 2 9151 0376 or email support.apac@harman.com.
This Limited Warranty protects only the original end-user and is non-transferable. It applies only in the country of purchase (excluding EEA member states and the Russian Federation). HARMAN warrants that the product will be free from defects in workmanship and materials for one year from the date of retail purchase. Defects resulting from accident, unreasonable use, neglect, shipping damage, failure to follow instructions, unauthorized repairs, or normal wear and tear (e.g., batteries, ear pads) are not covered. This warranty covers actual defects within the product itself and does not cover installation costs, adjustments, or units with effaced serial numbers. To obtain warranty service, contact the dealer or JBL customer support. Unauthorized repairs will void the warranty.
![]() |
JBL Endurance Peak Quick Start Guide A comprehensive guide to setting up and using your JBL Endurance Peak true wireless earbuds, covering features like Bluetooth pairing, charging, wearing, music control, call management, and factory reset. |
![]() |
JBL Endurance Peak 3 True Wireless Active Earbuds - Rugged, Waterproof, and Smart Discover the JBL Endurance Peak 3, rugged, waterproof, and dustproof true wireless active earbuds with PowerHook™ and Smart Ambient. Enjoy secure fit, clear calls, and long battery life for your active lifestyle. |
![]() |
JBL Endurance Race TWS Earbuds Quick Start Guide Learn how to set up, use, and optimize your JBL Endurance Race TWS true wireless active sport earbuds. This quick start guide covers pairing, controls, charging, and app features for these waterproof and dustproof headphones, ensuring a perfect fit for your active lifestyle. |
![]() |
JBL Reflect Flow True Wireless Sport Headphones | Features & Specifications Explore the JBL Reflect Flow true wireless sport headphones, designed for active lifestyles with IPX7 waterproofing, 30-hour battery life, JBL Signature Sound, Ambient Aware, and TalkThru features. |
![]() |
JBL Endurance Peak 3 Quick Start Guide A comprehensive quick start guide for the JBL Endurance Peak 3 true wireless headphones, covering setup, usage, features, and specifications. |
![]() |
JBL Reflect Flow: True Wireless Sport Headphones for Active Lifestyles Discover the JBL Reflect Flow, true wireless sport headphones designed for movement. Featuring IPX7 waterproof rating, 30 hours of battery life, Ambient Aware, TalkThru, and JBL Signature Sound for an enhanced active experience. |
![]() |
JBL Endurance Race TWS: Waterproof True Wireless Sport Earbuds Discover the JBL Endurance Race TWS, durable and waterproof true wireless active sport earbuds with JBL Pure Bass Sound, 30-hour battery life, IP67 rating, and Ambient Aware & TalkThru features. Customize your experience with the JBL Headphones App. |
![]() |
JBL Endurance Peak II Quick Start Guide and Specifications Concise guide to setting up, wearing, pairing, controlling, and charging your JBL Endurance Peak II wireless earbuds, including technical specifications and waterproof rating. |