MAGIC JOHN X7 Speaker Stand

Package List

• Speaker Stand ×1
• Data Cable ×1
• User Manual ×1
• Magnetic Mounting Pad ×2

Appearance Description

The speaker stand consists of the following components:

1. Magnetic/Wireless Charging Module
2. Telescopic Rod + Rotation
3. Transparent Shell
4. Base Module
5. Bottom Foot Pads
6. Type-C Port/SD Card Slot
7. Operation Area

Operation Guide

Power on/off & Bluetooth Mode

Power On/Off: Long press the power button for 2 seconds.

SD Mode: Insert an SD card to play.

Mode Switch: Single-click the power button.

Music Playback Controls

Volume +: Long press the left button.

Volume -: Long press the right button.

Previous Track: Press the left button once.

Next Track: Press the right button once.

Radio Mode Controls

Switch to Radio Mode: Click the power button.

Light Button: In radio mode, click the light button to auto-scan.

Volume +: Long press the left button.

Volume -: Long press the right button.

Previous Station: Press the left button once.

Next Station: Press the right button once.

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Company Slogan

Explore Technology, Witness Quality.