ASUS RT-BE7D00 / RT-BE86U Dual-Band WiFi Router

Hardware Explanations

I/O Ports Overview

• 10G WAN/LAN (Internet) port
• 2.5G WAN/LAN 1 port
• 2.5G LAN 2-4 ports
• USB 2.0 port
• USB 3.2 Gen 1 port (USB 3.0 port)
• DCIN port
• Reset button
• Power switch
• LED button
• WPS button

LED Lights Overview

• Power LED
• 2.4GHz LED
• 5GHz LED
• 10G LED
• USB LED
• WAN (Internet) LED
• LAN LEDs

Specifications

Router Setup Steps

01 Prepare your Modem

1. Unplug the power of your cable/DSL modem. If it has a battery backup, remove the battery.
2. Connect your modem to the WAN port at the back of the router using the provided network cable.
3. Power on the modem. Plug the modem into the power outlet and power it on.
4. Check the modem LED lights to ensure the connection is active.

If you are using DSL for internet, you will need your username/password from your Internet Service Provider (ISP) to properly configure your router.

02 Install your Router

1. Plug the adapter into the DCIN port, and press the Power switch.
2. The power LED will light up when the hardware is ready.

Connect to the Internet

Via App

1. On your iOS or Android mobile device, go to the app store, search for "ASUS Router", and download the app.
2. Connect to the default network SSID shown on the product label on the back of the router (e.g., "ASUS_XX", where XX refers to the last two digits of the MAC address). Alternatively, scan the QR code on the product label to connect to the default network SSID.
3. Launch the ASUS Router App and follow the on-screen instructions to complete the setup.

Via Web Browser

1. Connect your PC to a LAN port at the back of the router using an additional network cable. Alternatively, connect wirelessly to the network using the default SSID shown on the product label on the back of your router.
2. Open a web browser. You will be redirected to the ASUS Setup Wizard. If not, navigate to http://www.asusrouter.com.
3. Follow the instructions to complete the setup.

Gain Another 10GE LAN Port

Set up 2.5GE WAN connection to release another 10GE LAN Port

Connect the modem to the 2.5GE WAN port with a network cable.

In the ASUS Setup Wizard:

1. Select "Manual Setting".
2. Select "2.5G WAN", then follow the instructions to complete the setup of SSID and login information.

Start to Use

After following the setup steps, the router will reboot briefly and start to connect to the Internet via the 2.5GE port.

Frequently Asked Questions

Q1: Where can I find more information about the wireless router?

Technical support site: https://www.asus.com/support

Video Tutorials: https://qr.asus.com/wl_videotutorials

Regulatory and Safety Information

ASUS Recycling/Takeback Services

ASUS is committed to environmental protection through its recycling and takeback programs. For detailed recycling information in different regions, please visit: http://csr.asus.com/english/Takeback.htm

REACH Compliance

In compliance with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) framework, chemical substances in ASUS products are published on the ASUS REACH website: http://csr.asus.com/english/REACH.htm

Federal Communications Commission (FCC) Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Prohibition of Co-location

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement (FCC)

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC exposure compliance requirements, please follow the operation instructions as documented in this manual.

WARNING! This equipment must be installed and operated in accordance with provided instructions, and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 50cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

This device is restricted for indoor use.

Innovation, Science and Economic Development Canada (ISED) Compliance Statement

This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

CAN ICES-003(B)/NMB-003(B)

Radio Frequency (RF) Exposure Information (ISED)

The radiated output power of the ASUS Wireless Device is below the Innovation, Science and Economic Development Canada radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner that the potential for human contact during normal operation is minimized.

This equipment should be installed and operated with a minimum distance of 66cm between the radiator and any part of your body.

This device has been certified for use in Canada. Status of the listing in the Innovation, Science and Economic Development Canada’s REL (Radio Equipment List) can be found at: http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html

Additional Canadian information on RF exposure can be found at: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html

For indoor use only. (French: Pour une utilisation en intérieur uniquement.)

Antenna Information (Canada)

This radio transmitter [3568A-RTBE7D00] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.

The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit.

The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation.

Safety Notices

General Safety:

• Use this product in environments with ambient temperatures between 0°C (32°F) and 40°C (104°F).
• Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
• DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
• DO NOT place or drop objects on top and do not shove any foreign objects into the product.
• DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
• DO NOT cover the vents on the product to prevent the system from getting overheated.
• DO NOT use damaged power cords, accessories, or other peripherals.
• If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
• DO NOT mount this equipment higher than 2 meters.
• The power supply cord(s) must be plugged into socket-outlet(s) that are provided with a suitable earth ground.