Welcome to Sabai

Sabai is designing the difference. We've minimized your furniture's impact on the environment, from the materials, to the manufacturing process, to programs to extend its life cycle.

Our products are 100% vegan and are made from a combination of recycled, upcycled, and biodegradable materials. We utilize mechanical fasteners (rather than glue) to ensure that our materials remain recyclable and that we are keeping our manufacturing team safe.

To make sure our furniture stays out of landfills, we've launched two programs under our Sabai Standard: The Repair Don't Replace and Sabai Revive resale programs.

After a simple assembly, you can rest easy with Sabai.

This guide makes assembly a cinch. If you still have questions, you can reach our customer service team at customer@sabai.design and we'll respond within 24 hours.

Components

SOFA BACK

A single sofa back piece.

ARMS (x2)

Two arm pieces: a Left Arm and a Right Arm.

CUSHION

A sofa cushion.

SEAT PLATFORM

The base platform for the sofa seat.

BACK PILLOWS (x2)

Two back pillows.

FEET (x6)

Six sofa feet.

RATCHET WRENCH

A tool for tightening bolts.

BOLTS (x6)

Six bolts, 1/4-20 thread, 2 3/8" long. Note: The listed bolt quantity reflects how many bolts are needed for assembly, but you have been provided with extra bolts just in case they're needed.

Assembly Instructions

Step 1: Attach Back and Arms

1A: Attach Right Arm

We recommend two people for assembly. Take the Sofa Back and the Right Arm. Align the brackets on both pieces. Slide the Right Arm down, engaging both brackets, lining up the Arm with the bottom of the Sofa Back.

Diagram: Shows the Sofa Back and Right Arm with arrows indicating how the brackets slide into each other.

1B: Attach Left Arm

Take the Left Arm and align the brackets on both pieces. Slide the Arm down, engaging both brackets, and line up with the bottom of the Back.

Diagram: Shows the Sofa Back with the Left Arm being attached, similar to the right arm.

Step 2: Attach Seat Platform

2A: Flip Sofa Frame

Flip the Sofa Back and Arms onto their back.

Diagram: Shows the assembled back and arms being flipped over.

2B: Align Seat Platform

Align the Seat Platform to the bottom of the Back and Arms. There will be a cut-out area on the underside of the components that the Seat Platform will rest into.

If alignment is giving you trouble, turn the Chair frame so the bottom is facing up and the tops of the armrests are on the ground, allowing gravity to help. If needed, there is additional alignment help on page 11.

Diagram: Shows the Seat Platform being placed onto the bottom of the sofa frame.

2C: Insert Bolts into Feet

Insert the Bolts through the hole in each Foot. The head of the Bolt will sit within the larger drilled hole on the foot once tightened.

Diagram: Shows a bolt being inserted into a sofa foot.

2D: Align Bolt and Feet Assembly

Align the Bolt and Feet assembly with the threaded holes on the underside of the Seat Platform.

Diagram: Shows the feet with bolts attached being aligned with the underside of the seat platform.

2E: Tighten Bolts

Using the Ratchet Wrench, loosely tighten each bolt first before tightening all the way.

If a bolt is not fully reaching the threaded insert, you may need to remove the foot and tighten down with bolt only first, pulling the Seat Platform closer to the frame.

Tighten all feet securely.

Troubleshooting Tips

If it is difficult to locate the threaded inserts, try the following:

• The Arms naturally want to angle out. Compress the Arms together, tightening around the Seat Platform.
• Once you see a threaded insert through one of the Seat Platform's holes, insert a bolt (without foot), and tighten only a couple of turns.
• Continue to locate and add bolts to each hole until all inserts are located.
• Remove one bolt at a time, replacing it with the Bolt + Foot from Step 2C, tightening completely.

Step 3: Add Cushion & Pillows

3A: Place Cushion

Flip the Sofa so the feet touch the ground. Open the Cushion with the mattress side facing up and thinner cushion portion towards the ground. Align the cushion to the inside of the Sofa frame.

Diagram: Shows the sofa upright and the cushion being placed inside the frame.

3B: Secure Cushion

Fold the Cushion, pulling the back edge of the cushion to the inside of the Sofa and pushing down.

Diagram: Shows the cushion being tucked into the sofa frame.

3C: Add Back Pillows

Add the Back Pillows and enjoy!

Diagram: Shows the back pillows being placed on the sofa.