Tapo P304M Smart Wi-Fi Power Strip

Quick Start Guide

Safety Information

Keep the device away from water, fire, humidity, or hot environments.
Do not attempt to disassemble, repair, or modify the device.
Do not use the device where wireless devices are not allowed.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
The devices are not intended for use in locations where the temperature may be less than actual room conditions, such as unheated warehouses or garages.
Plug the product into the wall outlets with earthing connection through the power supply cord.
Do not cover the power strip while in use.
Risk of electric shock. Do not plug into another power strip or an extension cord.
Timers & Schedules could turn on unexpectedly without the user being present.
To Reduce the Hazardous Condition – Unplug the appliance from the socket-outlet before servicing.

CAUTION: To fully de-energize the appliance before servicing, unplug it from the receptacle.

Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

TP-Link declares that the device complies with essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU, and (EU) 2015/863. The original EU declaration of conformity may be found at https://www.tapo.com/en/support/ce/.

TP-Link declares that the device complies with essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK declaration of conformity may be found at https://www.tapo.com/support/ukca/.

For technical support, user guides, FAQs, warranty, and more, visit https://www.tapo.com/support/.

Getting Started

1. Download Tapo App

Get the Tapo app from the App Store or Google Play.

[App Store icon] [Google Play icon]

2. Power Up & Set Up

Open the Tapo app and tap the '+' button. Select Plugs and then your model. Follow the instructions to complete the setup.

[Smartphone illustration showing Tapo app setup]

How to Wall-Mount Your Device

1. Mark the screw hole locations on the wall, with a 16 cm spacing between the two screws.

2. Use a drill to insert the screws into the marked locations and securely attach the power strip.

For a smooth installation, use screws with a diameter range of 4-8 mm for the screw cap (Screw 4# or 6# recommended).

Dimensions for screw placement: A < 3 mm, B > 6 mm, 1.8 mm < C < 2.8 mm, 4 mm < D ≤ 8 mm.

How to Reset Your Device

Power Buttons

Reset Wi-Fi Settings Only: Press and hold any power button for 5 seconds.
Factory Reset: Press and hold any power button for 10 seconds.

Supported Load Types

Load Type	Max Current	Max Power (at 250V~)
Iron	13 A	3250 W
Kettle	13 A	3250 W
Heater	13 A	2500 W
Toaster	13 A	2500 W
Coffee Maker	13 A	2000 W
Desk Lamp	0.75 A	80 W
TV	2 A	350 W
PC	3.5 A	600 W
Fan	1.0 A	200 W
Water Pump	3.5 A	735 W (1HP)
Power Adapter/USB Charger	1.2 A	200 W

Note:

Avoid plugging in appliances with a motor/compressor higher than 1HP, such as an air conditioner. Frequent on/off switching may damage the compressor. You can check the motor/compressor value listed on your appliances or consult their customer support.
EV charging is not supported as it demands higher power and a charging current that surpasses the plug's rated capacity.

	Tapo P105 Mini Smart Wi-Fi Plug User Guide Comprehensive user guide for the Tapo P105 Mini Smart Wi-Fi Plug, detailing setup, features, device control, smart actions, voice control, and important safety and compliance information.
	Tapo L900 Smart Light Strip User Guide Comprehensive user guide for the Tapo L900 Smart Light Strip, covering setup, installation, configuration, smart features, voice control, troubleshooting, and regulatory compliance information.
	Tapo P110 Mini Smart Wi-Fi Plug Quick Start Guide - Energy Monitoring Quick start guide for the Tapo P110 Mini Smart Wi-Fi Plug, featuring energy monitoring. Learn how to set up, reset, and understand safety and compliance information for your smart plug.
	Tapo Smart Light Strip, Multicolor - Quick Start Guide and Setup Get started with your Tapo Smart Light Strip, Multicolor. This guide provides essential setup instructions, safety information, and technical specifications for easy installation and use.
	Tapo Mini Smart Wi-Fi Plug: Quick Start Guide & Setup Get started with your Tapo Mini Smart Wi-Fi Plug. This guide covers setup, resetting, supported load types, safety information, and third-party integrations for TP-Link smart home devices.
	Tapo P125M Mini Smart Wi-Fi Plug Quick Start Guide This guide provides instructions for setting up and using the Tapo P125M Mini Smart Wi-Fi Plug, including getting started, resetting the device, and important safety information.
	Tapo Smart Wi-Fi Outdoor Plug Quick Start Guide \| Setup & Waterproofing Get started with your Tapo Smart Wi-Fi Outdoor Plug. This quick start guide covers essential waterproofing tips, app setup, Matter integration, and troubleshooting for your TP-Link smart plug.
	Tapo P105 Mini Smart Wi-Fi Plug Quick Start Guide A concise guide to setting up your TP-Link Tapo P105 Mini Smart Wi-Fi Plug using the Tapo app. Includes setup steps, safety information, and technical specifications.