Getting Started
To set up your Tapo Mini Smart Wi-Fi Plug:
- Download the Tapo app from the App Store or Google Play.
- Follow the instructions within the Tapo app to complete the setup process.
How to Reset the Plug
- Press & hold for 5 seconds: Resets Wi-Fi settings while keeping previous configurations.
- Press & hold for 10 seconds: Performs a factory reset of the plug.
Supported Load Types
| Load Type | Max Current | Max Power (at 230V~) |
|---|---|---|
| Steam Iron | 16 A | 3200 W |
| Kettle | 16 A | 3000 W |
| Heater | 16 A | 2500 W |
| Toaster | 16 A | 2500 W |
| Coffee Maker | 16 A | 2000 W |
| Desk Lamp | 0.75 A | 80 W |
| TV | 2 A | 350 W |
| PC | 3.5 A | 600 W |
| Fan | 1 A | 200 W |
| Water Pump | 3.5 A | 735 W (1HP) |
| Power Adapter / USB Charger* | 1.2 A | 200 W (60-75 W excluded) |
Notes:
- *Power Adapters/USB Chargers rated under 75W may not support PFC (Power Factor Correction). PFC helps reduce inrush current. Using a 60-75W adapter may damage the device due to inrush currents.
- Avoid appliances with motors/compressors higher than 1HP (e.g., air conditioners), as frequent switching may damage compressors. Consult appliance specifications or support.
- EV charging is not supported due to high power demand exceeding the plug's capacity.
Third-Party Services
The Tapo plug is compatible with voice assistants and smart home platforms like Alexa, Google Assistant, and Samsung SmartThings. Set up these integrations via the "Me" > "Third-Party Services" section in the Tapo app.
Safety Information
- Keep this instruction manual for future reference.
- This device is for indoor use only. Plug into a suitable outlet.
- Keep away from heat sources and poorly ventilated enclosed spaces.
- Unplug the appliance before servicing to reduce hazardous conditions. The electronic switch is for functional purposes only.
- Keep away from water, fire, humidity, or hot environments.
- Do not attempt to disassemble, repair, or modify the device.
- Do not use where wireless devices are prohibited.
- Ensure the socket-outlet is installed near the equipment and is easily accessible.
- The device is not intended for locations with temperatures below typical room conditions (e.g., unheated warehouses).
- For passthrough devices, do not stack devices of the same or different types. Do not plug them in a row or one after another.
- Only de-energize by pulling the plug out.
- Do not operate while covered.
- Do not plug in any plug-in devices into the Tapo plug itself if it's not designed for passthrough.
Please read and follow the safety information. Improper use may lead to accidents or damage. Use with care and at your own risk.
Need Help?
For technical support, warranty information, and more, visit https://www.tapo.com/support/.
[QR Code for support]
Support | Tapo
