Anslut LED Strip
Item Numbers: 019906, 019907, 019908
Operating Instructions
Important! Read the user instructions carefully before use. Save them for future reference.
The product is supplied with a power adapter and LED strip. Ensure all connections are made correctly before powering on the product.
If the product does not function, check that the circuit is supplied with voltage.
Keep children at a safe distance from the product when it is in use.
Exceeding the permitted maximum voltage or temperature can damage the product or shorten its lifespan.
Technical Data
| Specification | 019906 | 019907 | 019908 |
|---|---|---|---|
| Rated Voltage | 230 V ~ 50 Hz | 230 V ~ 50 Hz | 230 V ~ 50 Hz |
| Colour Temperature | 2700 K | 2700 K | 2700 K |
| Operating Temperature | -20 to 40°C | -20 to 40°C | -20 to 40°C |
| Storage Temperature | -20 to 45°C | -20 to 45°C | -20 to 45°C |
| Output | 6 W | 16 W | 20 W |
| Luminous Flux | 400 lm | 1200 lm | 1800 lm |
| No. of LEDs | 60 | 180 | 300 |
| Cord Length | 1000 mm | 3000 mm | 5000 mm |
| LED Strip Size | 1000 x 10 x 5 mm | 3000 x 10 x 5 mm | 5000 x 10 x 5 mm |
Installation
Attach the LED strip using the supplied brackets and screws.
Refer to the following figures for installation guidance:
- Figure 1: Shows the power adapter connected to the LED strip, with a diagram indicating connection points.
- Figure 2: Illustrates LED strips and a connection point with positive (+) and negative (-) terminals.
- Figure 3: Demonstrates correct bending radius (r > 30mm, a > 60°) and incorrect bending (r <= 30mm, a < 60°), marked with an 'X'.
- Figure 4: Depicts plugging the power adapter into a wall socket.
Removal
- Cut the LED strip in the middle of the 50 mm long soldered joint. (Refer to Figure 5)
- Test the light source by connecting it to 12 V DC. (Refer to Figure 6)
Symbols
- [?] Read the instructions.
- [⬜] Safety Class II.
- [CE] Approved according to relevant directives/regulations.
- [♻️] Discarded product should be recycled according to applicable regulations.
