Anker 563 USB-C Hub (11-in-1)
User Manual
At a Glance
The Anker 563 USB-C Hub (11-in-1) offers a variety of ports to expand your device's connectivity.
- 1. USB-C connector: Connect to the USB-C port of a USB-C compatible computer, such as a MacBook.
- 2. Power indicator: Turns white when connected to a laptop.
- 3. USB 2.0 USB-A port: Connect to a USB-A device to support data transfer at speeds up to 480 Mb/s.
- 4. USB 3.0 USB-A port: Connect to a USB-A device to support data transfer at speeds up to 5 Gb/s.
- 5. USB-C port: Connect to a USB-C device to support data transfer at speeds up to 5 Gb/s.
- 6. Ethernet port: Connect to a router or modem at 10/100/1000 Mbps.
- 7. Audio port: Connect to earphones or other devices with a 3.5 mm connector.
- 8. PD-IN port: Connect to a PD charger to charge your laptop or tablet. Up to 100W input.
- 9. SD 3.0 Card slot: Insert an SD 3.0 card to copy files to and from your device.
- 10. microSD Card slot: Insert a microSD card to copy files to and from your device.
- 11. Display port: Connect to a device with a Display port to stream video at resolutions up to 4K@60 Hz.
- 12. HDMI port: Connect to a device with an HDMI port to stream video at resolutions up to 4K@60 Hz.
Specifications
- Data Speed: 5 Gbps
- Supported Systems: Windows OS XP / Vista / 7 / 8 /10 (X86 / X64), Mac OS 10.2 (and above), Chrome OS, iPad OS
- Size: 137 x 57 x 14 mm / 5.39 x 2.24 x 0.55 in
- Weight: 133g / 4.69 oz
Important Safety Instructions
- Avoid dropping.
- Do not disassemble.
- Do not expose to liquids.
- For the safest and fastest charge, use original or certified cables.
- This product is suitable for moderate climates only.
- The maximum ambient temperature when using this product must not exceed 104°F / 40°C.
- Open flame sources, such as candles, must not be placed near this product.
- Only use a dry cloth or brush to clean this product.
Declaration of Conformity
Anker Innovations Limited declares that the product type A8385 is in compliance with Directive 2014/30/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com/products
Anker Innovations Limited, Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Deutschland GmbH, Georg-Muche-Strasse 3-5, 80807 Munich, Germany
Anker Technology (UK) Ltd, Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom
GB Declaration of Conformity: Anker Innovations Limited declares that the product type A8385 is in compliance with The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012, Electromagnetic Compatibility Regulations 2016. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com
Anker Technology (UK) Ltd, Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The following importer is the responsible party:
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone:1-800-988-7973
IC Statement
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Customer Service
18-Month Limited Warranty: Anker provides an 18-month limited warranty. Please note that your rights under applicable law governing the sale of consumer goods remain unaffected.
Lifetime Technical Support: Anker offers lifetime technical support for this product.
Contact Information:
- Email: support@anker.com
- US: +1 (800) 988 7973 (Mon-Fri 9:00am - 5:00pm PT)
- UK: +44 (0) 1604 936200 (Mon-Fri 6:00 - 11:00 GMT)
- DE: +49 (0) 69 9579 7960 (Mo-Fr 6:00 - 11:00)
- China: +86 400 0550 036 (Mon-Fri 9:00 - 17:30)
- Japan: 03 4455 7823 (Mon-Fri 9:00 - 17:00)
For FAQs and more information, please visit: anker.com/support
Product Number: A8385 51005002539 V03