Carson MicroPen
24x-53x LED Microscope Pen
Congratulations on selecting your new MicroPen! In order to achieve optimum performance, please follow instructions for proper use and care.
Using the MicroPen
- Place microscope directly on top of object.
- Slide LED button: Down to turn On; Up to turn Off.
- Turn Zoom Wheel to adjust desired magnification.
- Slide Focusing lever until image is observed.
- Observe through eyepiece.
Diagram Description: The diagram illustrates the MicroPen with labels pointing to the Eyepiece, Zoom Wheel, Focusing Lever, and the LED ON/OFF Button. The LED button is shown in the 'ON' position.
Product Specification
Magnification: | 24x-53x |
Batteries: | 3 G3 Button Cell Batteries (included) |
Weight: | 0.7 oz |
Dimensions: | 0.5" x 0.7" x 5.2" |
Illumination: | LED |
Care
Clean using a microfiber lens cloth. Do not use any abrasives, chemical cleaners, or solvents.
Replacing Batteries
- Unscrew the battery door with a screwdriver and remove the door in the direction shown by the arrow in the diagram.
- Remove used-up batteries and insert 3 new G3 button cells into the compartment, ensuring the correct polarity.
- Close the battery door and tighten with a screwdriver.
Diagram Description: The diagrams show the process of replacing batteries: the first shows unscrewing the battery compartment cover, the second shows inserting three G3 button cell batteries with polarity indicators (+/-), and the third shows closing and tightening the cover with a screwdriver.
Customer Service
For customer service or assistance with any difficulties, please contact Carson Optical. For warranty information, visit www.carson.com/warranty.
Email: info@carson.com | uksupport@carson.com | eusupport@carson.com
Carson Optical, 2070 5th Avenue, Ronkonkoma, NY 11779 | Tel: 631-963-5000