CARSON MM-380 20x Microscope

PRODUCT SPECIFICATION

USING THE MICROSCOPE

1. Place microscope directly on subject and turn focus wheel until image is clear.

   [Diagram: Microscope placed on a surface, user turning a focus wheel.]

2. Slide switch:

   • DOWN: Activate the microscope LED.
   • UP: Use the flashlight function.
   • Center: Turn OFF.

   [Diagram: A switch with labels 'Flashlight - ON', 'OFF', 'Microscope LED - ON'.]

3. Press and hold UV button to use UV Light.

ATTACHING CLIP TO PHONE

Place clip on phone making sure camera* is centered inside circle on the underside of clip.

*For help with dual camera phones, visit www.carson.com/multicam.

[Diagram: A smartphone with a clip attached, showing the camera lens aligned with a circular cutout on the clip.]

ATTACHING MICROSCOPE TO CLIP

Align microscope with clip as shown. It will be magnetically held in place.

[Diagram: A microscope being attached to a clip, indicating magnetic connection.]

FOCUSING SCREEN IMAGE

Auto focus: Tap the screen in your camera app.

Manual focus: Turn the focus wheel on the microscope until the image is clear.

REPLACING BATTERIES

1. Use a screwdriver to remove screw. Then slide door open.
2. Insert 3 new G12 batteries, replace door and tighten screw.

[Diagram: Two illustrations showing the battery compartment being opened and batteries being inserted.]

WARNING

1. To avoid eye damage:
   • Do not look at the sun through this microscope.
   • Do not place lighted microscope directly upon human eye.
2. Remove batteries before storing microscope for an extended period.

Customer Service

If you experience any difficulties, please contact us and we will be happy to help you.

✉️ info@carson.com | ✉️ uksupport@carson.com | ✉️ eusupport@carson.com

For warranty information, visit www.carson.com/warrant.

Carson Optical 2070 5th Avenue, Ronkonkoma, NY 11779 | Tel: 631-963-5000