Kitchenwell KN354 Digital Kitchen Scale

Product Overview

This document provides instructions for the Kitchenwell KN354 digital kitchen scale. The scale features a stainless steel finish, a clear blue LCD display, and intuitive controls for power, tare, and unit selection.

Safety Precautions

• Read all instructions before use.
• Do not overload the scale; avoid placing items heavier than 10,000 grams (10 kg).
• Avoid exposure to extreme heat or cold.
• This scale is designed for domestic use.
• Always weigh on a flat, stable surface.

User Manual

1. Press the power button [power-symbol].
2. Wait until the display shows '0'.
3. Place the objects to be weighed on the weighing platform.
4. Use the "unit" button to select your desired weighing unit: G, KG, lb:oz, ml, fl.oz.

Tare Function

1. Place the desired weighing container on the platform.
2. Press the "tare" button [tare-symbol]; wait for the display to reset to '0'.
3. Weigh the desired item.

Calibration

1. Ensure the scale is empty and turned off.
2. Press and hold both the "tare" and "unit" buttons, then press the start/power button.
3. The display will show "CAL". Release the "tare" and "unit" buttons.
4. Press the "unit" button; the display will show a value.
5. When the number flashes, place the specified calibration weight (5,000 or 10,000 grams) onto the scale.
6. The display will show "PASS", indicating the scale has been successfully calibrated.

Troubleshooting / Error Signs

• Lo - Low battery: Replace batteries.
• OUR2 - Calibration required: Follow the calibration steps in the manual.
• 0 - Ld / Overload: Remove weight from the scale immediately.
• UnSt / Unstable: Ensure the scale is placed on a stable, flat surface.

Specifications