Kitchenwell KN353 Digital Kitchen Scale

Warnings

Safety precautions before use:

1. Read the instructions before use.
2. Avoid overloading the scale; do not put anything heavier than 15,000 grams (15 kg) on the scale.
3. Avoid extreme heat and cold exposure.
4. The scale is intended for domestic use.
5. Always weigh on a flat, stable surface.

User Manual

Operating instructions:

1. Press the power button [ON/OFF].
2. Wait until the display shows 0.
3. Place the objects on the weighing platform.
4. Use the "unit" button to choose from the weighing units: G (grams), KG (kilograms), lb:oz (pounds:ounces), ml (milliliters), fl.oz. (fluid ounces).

Tare Function

To weigh items accurately when using a container:

1. Place the desired weighing container on the platform.
2. Press the "tare" button; wait for the weight to reset to 0.
3. Place the item to be weighed into the container. The scale will display the net weight of the item.

Calibration

Follow these steps to calibrate the scale:

1. Ensure the scale is empty and turned off.
2. Press and hold the "tare" and "unit" buttons simultaneously, then press the power button.
3. The display will show "CAL". You can now release the "tare" and "unit" buttons.
4. Press the "unit" button; the display will show a value.
5. When the number flashes, place the specified calibration weight on the scale. This can be 5000, 10,000, or 15,000 grams.
6. The display will indicate "PASS", meaning the scale has been successfully calibrated.

Troubleshooting / Error Signs

If you encounter issues, refer to the following:

• Lo - Low battery: Replace batteries.
• OUR2 - Calibration error: Follow the calibration steps in the manual.
• 0 - Ld (Overload): Immediately remove weight from the scale to prevent damage.
• UnSt - Unstable: Ensure the scale is placed on a flat, stable surface.

Specifications