SKAFTET Cord Set Installation

Important Safety Information

CAUTION:

Before starting, turn off power at the main circuit panel. ⚠️

Diagram showing two figures with tools and question marks, preparing for assembly, followed by the IKEA logo.

Parts Included

Mounting bracket with screw (1x)
Cable strain relief component (2x)
Ceiling rose/canopy with attached wire (1x)
Lamp holder socket housing (1x)
Shade attachment ring (1x)
Lamp shade bowl (1x)

Assembly Instructions

Step 1: Prepare Shade

The wire from the ceiling rose/canopy is shown being threaded upwards through the opening of the lamp shade bowl. A magnified inset shows the wire passing through the opening.

Step 2: Attach Strain Relief

Two cable strain relief components are shown being slid onto the cord, below the opening of the ceiling rose.

Step 3: Connect Mounting Bracket

The cord is being fed through the mounting bracket. A hand is shown guiding the cord into the bracket's slots.

Step 4: Secure Cord in Bracket

The cord is being inserted into the locking mechanism of the mounting bracket. A magnified inset shows the cord being pushed into the bracket's clips.

Step 5: Finalize Bracket Connection

The cord is shown securely held by the mounting bracket's locking mechanism. A magnified inset shows an arrow indicating the cord being pressed into place.

Step 6: Attach Canopy

The ceiling rose/canopy is positioned against the ceiling. The wire from the canopy is shown being pulled upwards through the mounting bracket.

Step 7: Connect Wires

The wires from the ceiling are connected to the wires from the cord set using wire connectors (3x shown). A magnified inset shows the wire connection process.

English: Live (black wire) connects to Live.
English: Neutral (blue wire) connects to Neutral.
English: Earth/Ground (green/yellow wire) connects to Earth/Ground.
(Français: Phase, Neutre, Terre; Español: Con corriente, Neutro, Tierra)

Step 8: Mount Canopy

The ceiling rose/canopy is secured to the ceiling using screws. The diagram shows the canopy being aligned with mounting points and screws being inserted.

Step 9: Hang Lamp

The assembled cord set and shade are shown being hung onto the mounting bracket attached to the ceiling.

Step 10: Secure Shade

The shade attachment ring is being screwed onto the lamp holder socket. Magnified insets show the ring being threaded and tightened.

CAUTION!

Do not overtighten. ⚠️

Step 11: Install Light Bulb

A light bulb is shown being screwed into the lamp holder socket. A curved arrow indicates the direction of rotation.

Step 12: Attach Shade Bowl

The lamp shade bowl is being fitted and secured to the lamp holder assembly. Arrows indicate rotation and upward movement for attachment.

Step 13: Adjust Shade Position

The shade position is being adjusted. A finger is shown manipulating the shade. Magnified insets show measurements: "Max 4 mm (Max 5/32")" and "Min 4 mm (Min 5/32")", indicating clearance requirements.

Step 14: Final Shade Securing

The shade is being secured. A warning symbol ⚠️ with a crossed-out shade indicates incorrect placement or hazard.

Step 15: Weight Limit

Arrows show upward and rotational movement for securing the shade.

Maximum load: 1.6 kg / 3 lb. ⚠️

Step 16: Shade Requirements and Safety

Use only an open top, open bottom lamp shade.
For safety, the shade dimensions must comply with the minimum dimensions shown.
Use a maximum 22 watt bulb.
Shades must be used in a vertical position only. Deviation may cause a fire hazard. ⚠️

Diagram shows shade dimensions: Ø 91 mm (3 5/8"), 51 mm (2"), 90° angle.

Diagram shows incorrect shade placement, indicated by a crossed-out symbol ❌.

	SUNNEBY Pendant Lamp Installation Guide Detailed installation instructions for the IKEA SUNNEBY pendant lamp. Learn how to safely assemble and mount your lighting fixture, including wiring and shade attachment.
	SKAFTET Lamp - IKEA Assembly and Safety Information Comprehensive guide for the IKEA SKAFTET lamp, covering essential safety warnings about the power cord and step-by-step assembly instructions.
	KOPPLA Power Accessories - Safety and Usage Guide Safety warnings and important usage information for KOPPLA power accessories from IKEA, including extension cords and sockets. Learn about operating temperatures, cleaning, and proper disposal.
	SKAFTET Floor Lamp Base Assembly Instructions and Safety Warning Detailed assembly guide and safety information for the IKEA SKAFTET floor lamp base, including important warnings about the power cord. Model AA-2168957-3.
	SKAFTET Table Lamp Assembly Instructions \| IKEA Official assembly instructions and safety guidelines for the IKEA SKAFTET table lamp. Learn how to safely assemble the lamp and what to do if the flexible cable is damaged. Includes multilingual safety information.
	IKEA HEMMA Cord Set Installation Guide Official installation guide for the IKEA HEMMA cord set, providing step-by-step instructions and safety information for safe and proper assembly of this lighting fixture.
	RAKSTA LED Wall/Mirror Lamp Installation Instructions \| IKEA Step-by-step installation guide for the IKEA RAKSTA LED wall and mirror lamp. Includes safety precautions, cleaning instructions, FCC compliance, and assembly steps.
	SKENINGE Track System Buying Guide - IKEA Explore the IKEA SKENINGE track system for customizable and flexible lighting solutions. This guide covers how to choose components, create combinations, view parts and prices, and discover complementary products for your home or office.