Nexxt Home Smart Outdoor Dual Lens PTZ Wi-Fi Camera

User Guide

Thank you for purchasing the Smart Outdoor Dual Lens PTZ Wi-Fi Camera from Nexxt Home. This manual will help you get the most out of your new device.

Package Content

• Smart Camera
• Power adapter
• Power adapter rubber protector
• Wall screws (2)
• Wall anchors (2)
• User manual
• RJ45 protector
• Mounting bracket

If any items are broken or missing, contact Nexxt Home support at www.nexxtsolutions.com/connectivity/support/contact-us.

Overview

Front View

The front of the camera features Wi-Fi antennas, security lights, a fixed camera lens, and a motorized pan and tilt camera head.

Lateral View

The lateral view shows Wi-Fi antennas, the wall mount bracket, and the compartment for the MicroSD™ card slot and Reset button.

Rear View

The rear view displays the latch mechanism for camera attachment and the Siren/Speaker.

Bottom View

The bottom view shows the compartment for the MicroSD™ card slot and Reset button (covered).

Camera Features & Connectivity

This Smart Wi-Fi camera features an integrated dual connector with two ports:

• One USB-C® PD port for powering the camera via a USB-C® cable and power adapter.
• One RJ45 data port for optional Ethernet connection. This allows connection to an Ethernet-enabled LAN via an RJ45 terminated UTP cable* for enhanced internet access and data transfer, especially when the camera is far from the Wi-Fi router.

*The RJ45 terminated UTP cable is not provided.

Camera Installation

Step 1: Position and Mark

Place the wall mount bracket in the desired position and mark the drilling holes on the wall with a pencil. [✏️]

Step 2: Drill and Insert Anchors

Drill holes on the marked spots and then insert the provided wall anchors. [?️] [⚓]

Step 3: Attach Bracket

Firmly attach the bracket to the wall using the provided screws and a Phillips screwdriver. [?] [?]

Step 4: Mount Camera

Place the dual connector (c) through the conduit (b) and secure the camera to the wall mounting bracket by sliding the flaps (d) through the slots (e) in the bracket, until the latch mechanism (a) snaps into place, locking the camera. [➡️]

Inserting MicroSD Card

The Wi-Fi camera has a built-in card slot at the bottom, supporting microSD™ cards up to 128GB. Once inserted, the camera automatically starts recording and storing videos. This storage typically holds about one month of continuous footage.

Step 1: Open Compartment

Gently lift the rubber cover protecting the compartment at the bottom of the camera. [?]

Step 2: Insert Card

Insert the microSD™ card in the correct direction into the slot. [➡️]

Step 3: Close Compartment

Push the cover back down with your thumb until it tightly closes the compartment. [?]

Note: Failure to complete Step 3 may lead to water damage. [?❌]

Installing the Nexxt Home App

Download the Nexxt Home app from Google Play or the Apple App Store.

App Store Download

Shows a screenshot of the Apple App Store page for the Nexxt Solutions Home App, with a "GET" button.

Google Play Download

Shows a screenshot of the Google Play Store page for the Nexxt Solutions Home App, with an "INSTALL" button.

Creating a Nexxt Home Account

Step 1: Register by Email

Enter your email address and tap "Get authentication code". [✉️]

Step 2: Enter Verification Code

Enter the verification code sent to your email. [?]

Step 3: Set Password

Create a password (6-20 characters, including letters and numbers) and tap "Completed". [?]

Step 4: Account Created

Confirmation screen indicating the Nexxt Home account has been created successfully.

Adding Device to Nexxt Home Account

Step 1: Add Device

Select "Add device" or the "+" icon, then choose the smart camera. The app searches for nearby devices. Ensure your device is in pairing mode.

Step 2: Reset Device & Next

After selecting the smart camera, you will see a screen prompting you to reset the device. Ensure the indicator light is rapidly blinking or a prompt tone is heard. Tap "Next". [?]

Step 3: Connect to Wi-Fi

Connect to a 2.4GHz Wi-Fi network and enter your network password. [?]

Step 4: Scan QR Code

Scan the QR code displayed on your mobile device with the smart camera. Once you hear a tone, click the "I heard a prompt" button. [?]

Troubleshooting

If you encounter problems:

• Press the Reset Button.
• Restart the Camera: Press and hold the reset button for a few seconds until it powers off and restarts.

Step 5: Device Added & Settings

If pairing is successful, a "Device added successfully" notification appears. Click the pencil icon to rename the camera and select "Save" to store settings.

Camera Settings & Features

Main Interface Options

• Zoom: Adjusts the scene view. [?]
• Screenshot: Captures a still image from the camera feed. [?]
• Speak: Enables voice communication via the microphone. [?]
• Record: Starts video recording. [▶️]
• Playback: Watch recorded videos if a microSD™ card is installed. [▶️]
• Gallery: Displays all recorded videos and photos. [?️]
• Theme Color: Switch between light and dark modes for the interface. Dark mode is recommended for battery saving. [?]
• Private Mode: Temporarily disables the camera and microphone for privacy. [?]
• Night Mode: Enhances visibility for movement at night. [?]
• Device Volume: Adjusts the camera's audio output level. [?]
• Motion Tracking: Follows moving objects within the camera's view. [?]
• Motion Detection: Configures motion detection settings. [?️]
• Sound Detection: Turns sound detection on/off and controls settings. [?]
• Patrol: Automatically moves the camera between preset positions. [?]
• Siren: Activates or deactivates an alarm. [?]
• Light: Turns the camera's floodlight on/off. [?]
• Edit: Sets up shortcuts for controlling other compatible smart devices. [⚙️]
• Messages: Quick view of push notifications. [✉️]
• Direction: Remotely controls the camera's PTZ. [↩️]
• Site: Adds specific sites for the Patrol function. [?]
• Cloud Storage: Purchase cloud storage services for video data. [☁️]
• Features: Access additional camera settings. [⚙️]

Device Settings

Device Name

Allows renaming the device. Click on "Device Name" to change the default name. [✏️]

Device Information

Displays information about the camera, such as Owner, IP Address, Device ID, Time Zone, and Signal Strength. [ℹ️]

Tap-To-Run and Automation

Links the smart camera with other smart products for automated control via custom commands. [?]

Basic Function Settings

• High Dynamic Range (HDR): Improves image quality with a wider range of colors, brighter whites, and deeper blacks for more detail. [?]
• Talk Mode: Allows one-way or two-way audio communication. [?️]

IR Night Vision

Select between Smart, Infrared (IR), and Light modes for night vision configuration. [?]

Motion Detection Settings

Enable/disable motion detection alarms, adjust sensitivity (Low, Medium, High), set up schedules, and configure human filter. [?️]

Siren Adjustment

Configure the alarm volume and duration. [?]

ONVIF

Enable ONVIF to allow the camera to work and communicate with devices from multiple manufacturers. [?]

Memory Card Settings

View Total Capacity, Used space, Remaining Capacity, and Format the microSD™ card. [?]

Recording Settings

• Local Recording: Set the camera to record 24/7. Recording capacity depends on microSD™ card size. [?️]
• Mute Recording: Turn the camera microphone on/off during recording. [?]
• Recording Mode: Switch between Event and Continuous recording. [?]
• Schedule: Program recording start/stop times. [⏰]

Cloud Storage

Access photos and videos anytime, anywhere with an optional subscription plan. [☁️]

Offline Notification

Enable to receive a notification 30 minutes after the device goes offline due to power outage or other reasons. [?]

Feedback

Provide feedback or report issues encountered during setup. [?]

Share Device

Grant friends or relatives access to your smart camera by entering their email address. [?]

Add to Home Screen

Create a shortcut for the device on your phone's main screen. [?]

Device Update

View a record of firmware updates. [?]

Remove Device

Unpair the device from your Nexxt Home account. [❌]

Trademarks and Legal Information

Nexxt® is a registered trademark. SD™ and microSD™ are trademarks of SD-3C, LLC. Google, Google Home, Android™, and Google Play are trademarks of Google LLC. IOS is a trademark of Cisco. ONVIF is a trademark of Onvif, Inc. Wi-Fi® is a registered trademark of Wi-Fi Alliance®. All other trademarks are property of their respective holders. Made in China.