Coospo CS500 User Manual

Product Accessories

Charging: DC 5V

How to Install

1. Step 1
2. Step 2
3. Step 3
4. Step 4

Common Wheel Size and Circumference

Wheel Size L (mm)

Button Functions

Initial Settings

For first-time use, please charge the device. Select your language upon first use. After confirming your language, you will be redirected to the device's home page. To change the language, go to Home > Settings > System > Language.

Status Page

Connect successfully with the CoospoRide application. Displayed information includes:

• GPS Status: GPS Disabled, GPS Signal Strength
• Battery Level
• Ride Status: Start, Stop, Auto Pause
• Ride Mode: Indoor, Outdoor
• Sensor Connection: Displays connected sensor icons. A blinking icon indicates a sensor added but not connected. No icon means the sensor is not added. Supported sensors include: Heart Rate Monitor, Speed Sensor, Cadence Sensor, Power Meter, Bike Trainer, Di2, Radar Sensor, Speed and Cadence Sensor.
• Brightness: Adjust backlight level or use Auto mode for automatic adjustment based on ambient light.
• Temperature: May differ from actual ambient temperature.
• Altitude: Factory calibrated, auto-calibrates when GPS is active.

Connection and Installation

Connect to the CoospoRide App

Important: Do not pair the bike computer through your phone's Bluetooth settings. Download the CoospoRide app from the Apple Store or Google Play. Enable Bluetooth and Location permissions on your phone. Open the CoospoRide app, navigate to 'Bike Computer', select your model, and click the device ID to connect. Ensure Bluetooth and Location permissions are active for the app before connecting, as some phone models may not discover Bluetooth devices without these permissions.

App Permissions Example:

• ALLOW COOSPORIDE TO ACCESS Location: While Using the App
• ALLOW COOSPORIDE TO ACCESS Bluetooth
• Precise Location: Allowed

Device Management:

• Data Sync
• Firmware Update
• Add Sensor
• Ride Mode
• Page Setting
• Auto Setting
• Alert Setting
• All Settings

Add Sensor Management

The device can pair with Bluetooth or ANT+ sensors. Refer to the sensor compatibility list at www.coospo.com/faq for more information.

Add Sensors in the Bike Computer

Navigate to Settings > Sensors > Add Sensor, or from the Status Page > Sensors > Add Sensor. Press [select symbol] to choose the sensor type, then press [confirm symbol] to start searching. Press [select symbol] to choose the sensor ID, then press [confirm symbol] to add the sensor.

Add Sensors via APP

Open the CoospoRide app, go to Device > Add Device, search for the sensor you wish to add, and choose the device ID to add the sensor.

After adding speed/power sensors, verify connected sensors and click to set the wheel circumference/calibrate the power sensor.

Start Riding

GPS Positioning

1. For initial satellite positioning, wait 30-90 seconds in an open outdoor area. The device's date and time will be set automatically upon successful positioning.
2. Ensure the bike computer remains stationary while acquiring the GPS signal for better satellite reception.

Start Riding

From the home page, press [select symbol] to select Cycling, press [confirm symbol] to access the cycling page, then press [confirm symbol] to start riding.

Alternatively, press [any button] on any page to access the cycling page, then press [confirm symbol] to start riding.

On the cycling page, press [select symbol] to modify the data pages you wish to display.

• Status Page: After starting a ride, press [select symbol] to access the status page to check current status and adjust device settings. Press [select symbol] again to return to the cycling page.
• Function Menu: Pressing [select symbol] on the cycling page accesses the riding function menu for adjustments within the current riding mode.

Pages and Fields

You can customize the layout, data format, and specific data types displayed on your device, or configure all these settings via the CoospoRide app. Press [confirm symbol] to return to the cycling page after customization to view the updated layout.

Lap

Press [select symbol] during a ride to start recording a new lap. This function allows analysis and comparison of performance across different data segments. You can also configure automatic lap rules based on distance, time, or position.

Pause and Recording

When Auto Pause is enabled [power symbol], the ride recording will automatically pause. You can manually pause the ride recording by pressing [select symbol] during the ride, then press [confirm symbol] again to resume. In the Cycling menu, select 'Save' to finish and save the activity.

Check Data

History

From the home page, navigate to Home > Settings > History [history symbol] > History Data [history symbol]. Recorded data can be viewed here.

Data Sync

After connecting to the CoospoRide app, data will be synchronized automatically [sync symbol] to the app.

Device Updates

App Updates

Open the CoospoRide app, go to Device > Connected Device > Firmware Update. Click 'Check for Updates' and follow the instructions to complete the device update.

Device Settings

Ride Mode

• New Mode: Select 'New Mode' and press [confirm symbol] to add up to five new riding modes. Each mode can be configured separately.
• Delete Mode: New Modes can be deleted. System default modes cannot be deleted.

Alert Settings

Enable alerts and set data thresholds. When data exceeds the threshold, the bike computer will display a pop-up notification.

Pages and Fields

Consistent with the pages and fields in the Cycling > Function Menu.

Auto Settings

• Auto Lap: Automatically counts laps by distance/time/position.
• Auto Page Turn: Automatically cycles through all pages.
• Auto Start: Automatically starts recording ride data without pressing the start button.
• Auto Pause: Automatically pauses recording when speed is below a set value.

GPS

Set GPS Mode.

My Stats

• User Settings: Ensure your profile is set correctly as it affects the accuracy of measured data.
• Heart Rate Zone: Enter your current maximum heart rate. If unknown, use the default formula (220 - age).
• Power Zone: Enter your maximum functional threshold power (FTP) to calculate zones automatically. If unknown, use the system default value of 200.

System Settings

• Backlight: Manual/automatic backlight mode.
• Power Management:
  • Battery Saver Mode: Configure GPS mode and backlight brightness for low power consumption.
  • Auto Sleep: The device enters sleep mode after 5 minutes of inactivity.
• Calibration:
  • Elevation Calibration: Manually calibrate elevation data.
  • Compass Calibration: Use compass calibration for accurate navigation.
• Unit: Customize data units.
• Tone: Adjust key tones and alert tones.
• Time: Set the clock to 12-hour or 24-hour format. Set the time zone to correct the current time.
• Language: Set the display language.
• Data Overwrite:
  • Enabled: Automatically overwrites the oldest data when device storage is insufficient.
  • Disabled: Cannot save the latest recordings when device storage is insufficient.

Ensure you regularly sync your history with the CoospoRide app to save all your ride data.

Factory Reset

• Restore All Settings: Resets settings and ride modes to factory defaults without deleting ride data.
• Erase All Data: Resets settings and ride modes to factory defaults and deletes all data.

About

View device information, including Device ID, hardware and software versions, and memory status.

USB Synchronization

Use the USB cable to connect the bike computer to your PC. Export FIT files from the 'activity' folder. Import courses by copying them into the 'Courses' folder; they will be recognized automatically.

Contact Us

• Website: www.coospo.com
• Email: support@coospo.com

Attention

The information in this manual is for reference only. The product described may be subject to change without notice due to the manufacturer's ongoing research and development plans.

Disclaimer

The information contained in this manual is for reference purposes only. The product described herein may be subject to change due to ongoing research and development plans by the manufacturer, without prior notice. Shenzhen Coospo Tech Co., Ltd. disclaims any legal liability for any direct or indirect, incidental, or special damages, losses, and expenses arising from or in connection with this manual or the product contained herein.

Do not open or modify the product. Do not disassemble or attempt to repair this product. This product is safe under normal and reasonably foreseeable conditions of use. If the product is not functioning properly, contact COOSPO support. The product must be returned to the manufacturer for any service or repair.