VEVOR Heavy-Duty Cable Crimper User Manual

Product Overview

VEVOR offers tough tools at half the price. This manual provides instructions for the Heavy-Duty Cable Crimper, models HX-50B and LK-60A.

The company is committed to providing tools at competitive prices. Phrases like "Save Half" or "Half Price" represent an estimate of savings compared to major brands and may not apply to all product categories. Customers are advised to verify savings when ordering.

Product Images

Model HX-50B: A diagram shows a heavy-duty cable crimping tool with adjustable jaws and a cutting plier integrated. The tool has red handles and a metallic crimping mechanism with multiple die sets.

Model LK-60A: A diagram shows a pair of heavy-duty cutting pliers designed for cutting wires and cables. The pliers have red handles and sharp cutting jaws.

Contact Information

For product questions or technical support, please contact: CustomerService@vevor.com

Important Safety Information

1. WARNING!
2. Before using this product, disconnect the power supply first.
3. Inspect before every use; do not use if damaged.
4. Keep away from children.
5. Before using this product, understand the crimping specifications of cables and terminals.
6. When using this product, pay attention to keep the jaws clean.
7. Do not use this product for cables and terminals beyond its crimping range.
8. When using this product, do not put your fingers or other objects into the jaws to avoid injury.

Product Description

This product is a high-quality heavy-duty cable crimper with adjustable jaws. The pliers apply sufficient pressure to the wire and crimp terminal to bond them together. It also includes a pair of wire cutters for cutting wires and cables. Users should pay attention to safety warnings, wear personal protective equipment, and follow the correct usage methods.

Product Information

Heavy-Duty Cable Crimper

Product Structure

4.1 Cables Crimping Pliers Parts:

1. Crimping block: Used to compress and fix the cable.
2. Spring: Used to adjust the crimping block.
3. Anti-skid handle: Used to operate the manual wire rope crimping pliers.

Crimping block diagram: Shows the crimping block with a spring and anti-skid handles labeled.

4.2 Cutting Pliers Parts:

• Cutting mouth: Used to cut wire rope.
• Handle: Used to operate the cutter.

Cutting pliers diagram: Shows a pair of cutting pliers with the cutting mouth and handle labeled.

User Guide

5.1 Preparation:

Before using this product, prepare the following tools:

• Personal protective equipment such as protective gloves and goggles.
• Cables or terminals that require crimping.
• Lubricant and a clean cloth.

5.2 Method of Use:

1. Select the appropriate jaw size for crimping and rotate the left and right jaws to the corresponding position.
2. Insert the cable or terminal to be crimped into the jaw and align it with the gear of the jaw.
3. Firmly press the handle down until the jaws are fully closed.
4. Keep the handle compressed until the crimping is complete.
5. Release the handle and remove the crimped cable or terminal.

5.3 Jaw Adjustment Method:

The jaws of this cable crimper are adjustable. To adjust, press down the spring on the clamp head, rotate the left and right jaws to the desired crimping size, and then release the spring to secure the jaws.

Repair and Maintenance

1. This product contains tightly fitted components; do not dismantle them.
2. Avoid impacts and keep the tool away from moisture.
3. After repeated use, check the oil level in the hand tool's reservoir.
4. For refilling, use ##20 oil. Ensure refilled oil is free of dust and grit.
5. To refill, unload the fixed handle, pull out the rear oil plug from the oil reservoir, and add ##20 mechanical oil filtered through a 200- mesh screen until oil overflows.
6. Loosen the oil valve, slowly turn the movable handle several times to release trapped air in the oil reservoir. Replace the oil plug and screw down the fixed handle.

Company Information

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai

Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC REP: SHUNSHUN GmbH, Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten, Germany

UK REP: Pooledas Group Ltd, Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom

Made In China