VEVOR Wire Rope Crimping Pliers User Manual

Product Overview & Disclaimer

This document serves as the user manual for the VEVOR Wire Rope Crimping Pliers. VEVOR is committed to providing tools at competitive prices. The terms "Save Half" or "Half Price" are estimates of potential savings compared to major brands and do not guarantee savings across all product categories. Customers are advised to verify savings when placing an order.

Product Identification

Product Name: WIRE ROPE CRIMPING PLIERS

Models: FSH-Y10, NKGS10

Have product questions? Need technical support? Please feel free to contact us: ✉ CustomerService@vevor.com

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret its user manual. The appearance of the product shall be subject to the product received. VEVOR will not provide further notice for technology or software updates.

1. WARNING!

• ⚠ Disconnect wiring power supply before working.
• ⚠ Inspect before every use; do not use if damaged.
• ⚠ Keep away from children.

2. Product Overview

This product includes a wire rope crimping pliers and a cutting pliers. The wire rope crimping pliers is a hand-operated tool used to join wire rope. The cutting pliers are accessories for crimping pliers and are used to cut wire rope.

3. Product Parameters

• Name: Wire rope crimping pliers
• Model: FSH-Y10+NKGS10
• Net Weight (N.W.): 0.86kg
• Gross Weight (G.W.): 0.92kg
• Package Size: 295x140x40mm

4. Product Structure

4.1 Wire Rope Crimping Pliers Parts:

Diagram shows a pair of pliers. The top jaw features a crimping block with multiple slots for different wire rope diameters. Adjacent to the crimping block is a cutting blade. The handles are designed with anti-skid grips, and a lock button is visible near the pivot.

• Crimping block: Used to compress and fix the wire rope.
• Cutting blade: Used to cut wire rope quickly.
• Anti-skid handle: Used to operate the manual wire rope crimping pliers.
• Lock button: Used to lock and unlock the tools.

4.2 Cutting Pliers Parts:

• Cutting mouth: Used to cut wire rope.
• Handle: Used to operate the cutter.

5. User Guide

1. Determine the diameter of the wire rope to be connected and select the corresponding crimping block.
   • Jaws 1: 0.1-0.5mm wire rope
   • Jaws 2: 0.5-1.0mm wire rope
   • Jaws 3: 1.0-2.0mm wire rope
   • Jaws 4: 2.2mm wire rope
2. Insert the wire rope into the correct jaw and place crimp blocks on both ends of the wire rope.
3. Use the handle to operate the wire rope crimping pliers, and press the crimping block against the wire rope.
4. Use cutting pliers to cut off the wire rope, paying attention to safety when cutting to avoid injury.
5. Check the connection to make sure it is secure. If something goes wrong, the crimping process needs to be redone.

6. Safety and Maintenance

• Manual wire rope crimping pliers can only be used to join wire rope, not for other materials.
• When using manual wire rope crimping pliers, pay attention to safety to prevent accidents.
• Ensure the tool is in normal working condition; stop using it immediately if any abnormal situation occurs.
• Clean manual wire rope crimpers promptly after use to keep dust and debris out.
• Manual wire rope crimping pliers should not be stored in a humid environment for a long time to prevent rust.