GX-Force Quick Reference Guide

Operating the GX-Force

Powering On

Press and hold the POWER MODE button to turn the device on. The device will initiate a warm-up and self-test sequence.

Normal Operation

After a brief warm-up period, the device enters Normal Operation mode. The LCD display will show real-time gas readings (e.g., CH4, CO, O2, H2S) and status indicators. Example display readings:

CH4: 0 %LEL
CO: 0 ppm
O2: 20.9 %
H2S: 0.0 ppm

Fresh Air Calibration Check

To ensure accurate readings, expose the device to fresh air. Press and hold the AIR button.

Bump Test / Calibration (Past Due)

If the device indicates "Past Due Bump/CAL", perform a bump test or calibration. To initiate Bump/CAL, press the POWER MODE button. Confirm the action and use the AIR button to proceed. The display will show status messages like "CAL BMP.LMT" or "CAL -- LMT".

Powering Off

Press and hold the POWER MODE button to turn the device off.

GX-Force Device Components

The GX-Force gas detector features the following components:

Gas Inlet: Where air is drawn into the sensor.
Filter Casing: Protects the internal filter.
Alarm LEDs: Visual indicators for gas detection alarms.
Flashlight: Integrated light source.
LCD Display: Shows gas readings, status, and menu options.
AIR Button: Used for fresh air checks and navigation.
POWER MODE Button: Used for turning the device on/off and menu navigation.
Buzzer Opening: Allows the audible alarm to be heard.
Wrist Strap Holes: For attaching a wrist strap for secure carrying.
Charging LED: Indicates the charging status of the device.

Manufacturer Information

RKI Instruments, Inc.

33248 Central Ave, Union City, CA 94587

Phone: (510) 441-5656 | (800) 754-5165

Website: www.rkiinstruments.com

	RKI GX-6000 Gas Monitor Operator's Manual \| Safety & Detection Guide Comprehensive operator's manual for the RKI GX-6000 multi-gas detector. Learn about its features, operation, calibration, maintenance, and safety protocols for industrial gas monitoring.
	RKI Instruments 04 Series Calibration Station SDM-04 User Guide Comprehensive user guide for the RKI Instruments 04 Series Calibration Station (Model SDM-04), detailing procedures for turning on the device, performing bump tests, calibrating gas monitors, and transferring data via USB.
	RKI T2A Hazardous Gas Detector Operator's Manual Comprehensive operator's manual for the RKI Instruments T2A, an explosion-proof ambient air hazardous gas detector. Learn about installation, operation, maintenance, calibration, and specifications for safe and effective toxic gas detection in hazardous environments.
	RKI GX-6100 Portable 6-Component Gas Detector with PID Sensors The RKI GX-6100 is a portable 6-component gas detector featuring PID sensors for enhanced safety and VOC detection. It offers simultaneous detection of up to 6 gases, Bluetooth connectivity, and easy data management via smartphone. The device is designed for a wide range of conditions and provides reliable gas monitoring.
	RKI Instruments M2A Transmitter 65-2670-XX-07 Operator's Manual Comprehensive operator's manual for the RKI Instruments M2A Transmitter (Model 65-2670-XX-07), detailing installation, operation, maintenance, specifications, and troubleshooting for continuous gas monitoring applications.
	RKI Instruments 04 Series Calibration Station User Guide User guide for the RKI Instruments 04 Series Calibration Station (Model SDM-04), covering operation for turning on, bump testing, calibration, and data transfer.
	RKI Instruments M2A-XL Transmitter 65-2641XL-05-04 Operator's Manual Comprehensive operator's manual for the RKI Instruments M2A-XL Transmitter (Model 65-2641XL-05-04). Learn about installation, operation, maintenance, calibration, and Modbus communication for this hydrogen gas detector.
	RKI Instruments 35-3001A-08-XX Sample-Draw Detector Operator's Manual Operator's manual for the RKI Instruments 35-3001A-08-XX Sample-Draw Detector, providing detailed instructions on installation, startup, maintenance, calibration, troubleshooting, and component replacement.