DJI FPV Goggles V2 User Guide
This guide provides essential information for operating the DJI FPV Goggles V2, covering setup, linking, button operations, usage, and specifications.
Getting Started and Linking
Ensure all devices are powered on before proceeding with linking.
Linking Process:
- Press the link button on the air unit. The linking status indicator will turn solid red.
- Press the link button on the goggles. The goggles will emit a continuous beep.
- Once successfully linked, the air unit's linking status indicator will turn solid green, the goggles will stop beeping, and the video display will become normal.
Important Note: If you need to use the Goggles and remote controller together, the air unit must be linked to the goggles before linking to the remote controller.
Additional Resources:
- For the DJI Digital FPV System, visit www.dji.com/fpv/video (Scan QR code for video).
- For DJI FPV, visit www.dji.com/dji-fpv/video (Scan QR code for video).
Initial Setup: When powered on, connect the goggles to a computer and run DJI ASSISTANT™ 2 for activation.
Key Button Operations
The goggles feature several control buttons:
5D Button
This multi-directional button is used for navigation and confirmation within the goggles' interface.
- Toggle the button to scroll through menu options.
- Press the button to confirm a selection or action.
Record Button
This button is dedicated to video recording functions.
- Press the button to start or stop video recording.
Back Button
Used for navigating backward through menus and exiting modes.
- Press to return to the previous menu or exit the current mode.
Channel Adjustment Buttons
These buttons allow for selection of different channels.
- Press to switch channels.
Channel Display
This display area shows the currently active channel.
- Displays the current channel.
Specifications
| Feature | Specification |
|---|---|
| Model | FGDB28 |
| Weight | Approx. 420 g (incl. headband and antennas) |
| Dimensions | 184×122×110 mm (excl. antennas) 202×126×110 mm (incl. antennas) |
| Screen Size | 2-inch x 2 |
| Screen Resolution (Single Screen) | 1440×810 |
| Operating Frequency | 2.400-2.4835 GHz; 5.725-5.850 GHz |
| Transmitter Power (EIRP) | 2.4 GHz: ≤28.5 dBm (FCC), ≤20 dBm (CE/SRRC/MIC) 5.8 GHz: ≤31.5 dBm (FCC), ≤19 dBm (SRRC), ≤14 dBm (CE) |
| Live View Mode | Low Latency Mode (810p 100fps/120fps) High Quality Mode (810p 50fps/60fps) |
| Video Format | MP4 (Video format: H.264) |
| Supported Video Play Format | MP4, MOV, MKV (Video format: H.264; Audio format: AAC-LC, AAC-HE, AC-3, MP3) |
| Operating Temperature | 0° to 40° C (32° to 104° F) |
| Power Input | Recommended to use DJI FPV goggles battery Other battery: 11.1-25.2 V |
| Goggles Battery Capacity | 1800 mAh |
| Voltage | 9 V max |
| Type | LiPo 2S |
| Energy | 18 Wh |
| Charging Temperature | 0° to 45° C (32° to 113° F) |
| Max Charging Power | 10 W |
Safety and Disclaimer
Users are advised to read the entire document and all safety and lawful practices DJI™ provided carefully before use. Failure to follow instructions and warnings may result in serious injury or damage to the product or surroundings. By using this product, users agree to these terms and accept full responsibility for their actions and consequences. DJI disclaims liability for any damages, injuries, or legal responsibilities incurred directly or indirectly from product use.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. This product and document are copyrighted by DJI with all rights reserved.
For the latest product information, please visit www.dji.com.
