boAt Airdopes 131 True Wireless Earbuds
Introduction
Get ready to get yourself soaked in musical bliss with your very own pair of boAt Airdopes 131. This manual serves as your guiding map towards the shores of musical bliss. Knowledge of Bluetooth and device connectivity is essential for steering this boat, and therefore, thorough reading of this manual is strongly recommended. You may also refer to it when facing any difficulty in the future.
In the Box
- 1x Pair of Ear-Buds
- 1x Charging Case
- 2x Pairs of Additional Earmuffs
- 1x User Manual
- 1x Charging Cable
Product Overview
1. MFB (Multi Function Button) / Power Button: The primary button on the earbuds for various controls.
2. Indicator Lights: LEDs on the earbuds and charging case to show status.
3. Charging Port: Port on the charging case for power input.
Powering On
First Time User
There are two methods to power on the earbuds for the first time:
- Smart Power On: Simply open the lid of the charging case. The IWP™ (Insta Wake N’ Pair) Technology enables the earbuds to power on automatically and enter connection mode.
- Manual Power On: Long press the Multifunction Button (MFB) on both earbuds for 3 seconds until the LED starts to flash blue.
After powering on, both earbuds will automatically pair with each other and enter Connection Mode.
Subsequent Usage (IWP Technology)
The next time you open the lid of the case, the IWP™ (Insta Wake N’ Pair) Technology enables the earbuds to power on automatically and connect to the previously connected device.
Notes: Pairing mode lasts for 5 minutes. If the pairing time is missed, you will need to reconnect the earbuds and follow the power-on procedure again. Airdopes 131 remembers previously connected devices; once switched on, the earbuds automatically reconnect to the previously connected device.
Bluetooth Pairing
- Ensure the earbuds are powered on and in connection mode.
- Turn on Bluetooth on your phone/media device and scan for available devices.
- Search for ‘Airdopes 131’ and select it to connect.
- Enter ‘0000’ as the passkey if prompted.
Congratulations! Your earbuds are now connected successfully via Bluetooth.
Basic Functions
- Voice Assistant: Long press the MFB on either earbud for 2 seconds to activate the voice assistant. The respective voice assistant screen will pop up, allowing you to place commands.
Example commands: "What is the weather?", "Play a song", "Set a reminder".
- Answer/Hang Up Call: Single press the MFB on either earbud to answer an incoming call or hang up an ongoing call.
- Reject Call: Long press the MFB on either earbud for 2 seconds to reject incoming calls.
- Play/Pause Music: Single press the MFB on either earbud to play or pause music.
- Next Track: When music is playing, double press the right earbud’s MFB to skip to the next song.
- Previous Track: When music is playing, double press the left earbud’s MFB to return to the previous song.
Note: Volume cannot be controlled via the earbuds and can only be adjusted via your phone/media device.
Single Earbud Usage
Both earbuds can be used in mono mode. Follow these steps:
- Use either the Smart Power On or Manual Power On method for the desired earbud.
- The selected earbud will automatically enter connection mode.
- Turn on Bluetooth on your phone/media device and search for ‘Airdopes 131’ to connect.
To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, enabling Stereo usage. You cannot skip tracks or return to previous tracks in Mono mode.
LED Indicators / Functionalities
The MFB (Multi Function Button) on the earbuds controls various functions:
- 2 Seconds Long Press (either earbud): Activate Voice Assistant.
- 3 Seconds Long Press (both earbuds): Manually Power On (Blue LED indication).
- 5 Seconds Long Press (either earbud): Manually Power Off (Red LED indication).
- Triple Tap (both earbuds): Perform Factory Reset (Red LED blinks for 1 second).
Charging
Charging the Case
- Plug one end of the charging cable into the case and the other end into a USB port/adapter.
- Flashing white LEDs indicate the charging case is being charged. Once fully charged, the LEDs turn solid white.
The LED lights on the charging case indicate its battery status.
Charging the Earbuds
- Insert the earbuds back into the charging case in the correct orientation.
- A solid white LED on the earbuds indicates they are being charged. The LED turns off once fully charged.
- Once the earbuds are fully charged, the charging case automatically switches off to save power.
Before first use, it is recommended to fully charge the earbuds. Keep the charging case lid closed while charging and use a 5V/2A adapter.
Factory Reset
Perform a factory reset if you encounter any difficulties operating your Airdopes 131:
- Keep both earbuds inside the case in their correct orientation.
- Triple tap the MFB on both earbuds. The Red LED will blink for 1 second to indicate the reset.
- After the reset, close the lid of the carry case.
Your Airdopes 131 has now been reset and is ready to establish a new connection.
Common Problems with Solutions
| Potential Problem | Solution |
|---|---|
| If only one earbud is functioning | Simply insert the earbuds back into the case and take them out, or perform the Factory Reset. |
| If earbuds are not in scan mode | Simply insert the earbuds back into the case and take them out, or perform the Factory Reset. |
Troubleshooting
| Potential Problem | Solution |
|---|---|
| If one earbud is not working | Perform the Factory Reset. |
| If earbuds are not in connection/scan mode | Perform the Factory Reset. |
| If earbuds disconnect during a phone call | Charge the earbuds or perform the Factory Reset. |
| If there are other exceptions in usage | Place the earbuds back into the charging case, try using them again, or perform the Factory Reset. |
Specifications
| Bluetooth Version | V5.0 |
| Driver Size | 13mm |
| SNR | 90dB |
| Music Playtime | Up to 3 Hours (Up to 12H with Case) |
| Talk Time | Up to 3 Hours |
| Standby Time | 100 Hours |
| Transmission Range | 10m |
| THD | <5% |
| Bluetooth Profile | HSP, HFP, A2DP, AVRCP |
| Frequency | 20Hz-20000Hz |
| Battery Earbuds | 40mAh x2 |
| Battery Charging Case | 650mAh |
| Charging Time | 2 Hours |
Warning
- Please follow the instructions to operate.
- Please charge the earbuds with input power below 5V/2A to protect the battery.
- Please do not use the earbuds in extreme temperatures.
- Please do not use the product near water.
- Keep the product away from heat sources, as heat may damage it.
- Do not jam ports such as the charger port or LED port.
- It is recommended to use the product below maximum volume to protect hearing and extend the earbuds’ service life.
- Never disassemble or modify the device to avoid permanent damage or danger.
- Do not use the device during a thunderstorm to avoid irregular function or risk of electric shock.
- Do not use harsh chemicals to clean the device.
Charging Norms & Precautionary Guidelines
- Charger/Brick/Adapter: 5V/2A
- Cable/Wire: Standard Cable (35 Strands @0.10mm diameter/strand)
Any other accessory can be paired up with the product as long as the specifications are as per the above norms.
Advisable
The earbuds start at 100% volume. This may need to be reduced when the earbuds are switched on for the first time. This can be done using the volume control on your phone/media device.
