SONOFF NSPanel Smart Scene Wall Switch

Product Introduction

The SONOFF NSPanel is a dual-channel smart touch control panel that integrates three interactive methods: screen touch, voice control, and App control. It allows users to control various smart devices, including smart switches and plugs (for heating/cooling), linked to their eWeLink account. Users can manage multiple smart devices by adding widgets to their smartphones, enabling functions like turning devices on/off, scheduling operations, and sharing control with family members.

Key Features:

• ? Remote Control
• ⏱️ Smart Timing/Countdown
• ?️ Voice Control
• ? Share Function
• ?️ 3.5" TFT Touch Screen
• ➕ Adding Widgets
• ✨ Smart Scene
• ?️ Thermostat
• [inching] Inching Mode
• [interlock] Interlock Mode
• ?‍?‍?‍? Group Control
• ? LAN Control

Note: The device weight is less than 1 kg. An installation height of less than 2 meters is recommended.

Operating Instructions

1. Power Off

Before installation or maintenance, ensure the power is turned off. Professional installation by a qualified electrician is recommended to avoid electric shock hazards. Do not operate any connections or touch terminal connectors while the device is powered on.

Diagrams showing a hand switching off a circuit breaker are illustrative of the power-off step.

2. Wiring Instruction

Light fixture wiring diagrams are provided for both NSPanel-EU and NSPanel-US models. These illustrate the connection of Live (L), Neutral (N) wires to the input terminals, and the output terminals (L1 Out, L2 Out) for controlling two separate circuits. Ensure all wires are connected correctly.

Diagrams showing the wiring connections for NSPanel-EU and NSPanel-US models are present.

3. Download the eWeLink App

Download the eWeLink app to manage your NSPanel and connected devices. The app is available for both Android and iOS platforms. QR codes are provided for easy download.

QR codes for downloading the eWeLink app for Android and iOS are displayed.

4. Power On & Add Device

After powering on, the NSPanel will enter Bluetooth pairing mode for the first use. To add the device, tap "+" in the eWeLink app, select "Bluetooth Pairing," and follow the on-screen prompts.

Screenshots show the NSPanel screen indicating Bluetooth pairing mode and the eWeLink app interface for adding devices via Bluetooth.

Operation Guide

Drop Down

Swipe down on the NSPanel screen to access settings for screen brightness and sleep time.

Screenshots illustrate the drop-down menu for adjusting screen brightness and sleep time.

Swipe Right

After adding the temperature controller function in the eWeLink app, swipe right on the NSPanel to set up and control the added temperature controller.

Screenshots show the interface for adjusting temperature settings via swiping right.

Swipe Left

After adding widgets in the eWeLink app, swipe left on the NSPanel to control the added widgets.

Screenshots show the interface for controlling various widgets via swiping left.

Bind Temperature Control Device

The NSPanel features a built-in temperature sensor to monitor room temperature. Users can maintain room temperature by controlling connected coolers or heaters via smart switches or plugs paired with the eWeLink App. Access the "Thermostat" section in the NSPanel interface within the app to select devices for binding. Users can choose one device or one channel of a multi-channel device and designate it as a "Heater" or "Cooler."

After activation, two temperature control modes are available: Manual mode and Auto mode.

• Manual Mode: Allows manual temperature adjustments at any time.
• Auto Mode: Allows setting up to 6 different target temperatures for specific time periods. Settings execute automatically and cannot be manually overridden unless switched back to Manual mode. Binding devices turn off when their schedule ends.

Note: Actual room temperature will be within ±1°C of the set temperature. For example, a setting of 26°C corresponds to a range of 25°C to 27°C.

Screenshots illustrate the process of selecting devices and setting temperature modes in the eWeLink app.

Add Widgets

The NSPanel screen can accommodate up to 8 widgets for quick control. Widgets can represent single devices, groups of similar devices, or scenes. Advanced control for multi-gang and lighting devices is available through a secondary interface.

Screenshots show the process of adding widgets to the NSPanel via the eWeLink app.

Specifications

Re-establish Pairing

If you need to change the NSPanel's associated account or Wi-Fi connection, you must re-pair the device. Press any button on the device for 5 seconds until the screen indicates it has entered Bluetooth pairing mode. The NSPanel will then be available for pairing in the eWeLink App.

Screenshots show the NSPanel screen indicating pairing mode.

Note: The device will exit Bluetooth pairing mode if not paired within 3 minutes.

Factory Reset

To restore the NSPanel to factory settings, delete the device from the eWeLink app.

Common Problems

Fail to pair Wi-Fi devices to eWeLink App

1. Ensure the device is in pairing mode. It will automatically exit pairing mode after three minutes of unsuccessful pairing.
2. Enable location services and grant location permission. This is required before selecting a Wi-Fi network to obtain Wi-Fi list information. Disabling it will prevent device addition.
3. Verify that your Wi-Fi network operates on the 2.4GHz band.
4. Confirm you have entered the correct Wi-Fi SSID and password, ensuring no special characters are included. Incorrect passwords are a common cause of pairing failure.
5. Position the device close to the router during pairing for optimal signal transmission.

FCC Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help.

Declaration of Conformity

Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type NSPanel-EU, NSPanel-US is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://sonoff.tech/usermanuals

Company Information:
Shenzhen Sonoff Technologies Co., Ltd.
1001, BLDG8, Lianhua Industrial Park, Shenzhen, GD, China
ZIP code: 518000
Website: sonoff.tech

Made in China. Compliance marks (FCC, CE, UKCA) are indicated.