SONOFF TX NSPanel User Manual V1.1

Product Introduction

The NSPanel is a smart scene wall switch designed by Shenzhen Sonoff Technologies Co., Ltd. It features a 3.5" TFT Touch Screen and integrates multiple control methods.

NSPanel-EU and NSPanel-US Overview

The device is available in two versions: NSPanel-EU and NSPanel-US.

NSPanel-EU Components:

• 3.5" TFT Touch Screen
• Temperature Sensor
• Reset Button
• Pairing button/Physical switch

NSPanel-US Components:

• 3.5" TFT Touch Screen
• Temperature Sensor
• Reset Button
• Pairing button/Physical switch

Installation Recommendation: The device weight is less than 1 kg. The installation height of less than 2 m is recommended.

Features

NSPanel is a dual-channel smart touch control panel integrating three interactive methods: screen touching, voice control, and App control. Users can control various device types, including smart switches and plugs (for heating/cooling), linked to their eWeLink account. It allows users to manage multiple smart devices by adding widgets on their smartphones, enabling actions like turning devices on/off, scheduling operations, and sharing control with family members.

Key Features:

• ? Remote Control
• ⏰ Single/Countdown Timing
• ? Voice Control
• ? Share Control
• ? 3.5" TFT Touch Screen
• ➕ Adding Widgets
• ? Smart Scene
• ?️ Thermostat
• ⚙️ Inching Mode
• ? Interlock
• ?‍?‍?‍? Group Control
• ? LAN Control

Operating Instruction

1. Power off

[Circuit breaker panel diagram showing power being switched off.]

Safety Warning: Please install and maintain the device by a professional electrician. To avoid electric shock hazard, do not operate any connection or contact the terminal connector while the device is powered on!

2. Wiring instruction

Light fixture wiring instruction:

NSPanel-EU Wiring:

[Wiring diagram for NSPanel-EU showing connections to N, L1 Out, L2 Out, L In from a light fixture and 100-240V AC power source.]

NSPanel-US Wiring:

[Wiring diagram for NSPanel-US showing connections to N, L1 Out, L2 Out, L In from a light fixture and 100-240V AC power source.]

Note: Make sure all wires are connected correctly.

Setup Guide

3. Download the eWeLink App

Download the eWeLink app from the [App Store] or [Google Play]. The app is available for Android™ & iOS.

[QR Code for downloading the eWeLink app.]

4. Power on

[NSPanel UI showing a power-on animation or loading screen.]

After powering on, the device will enter Bluetooth pairing mode during the first use. The screen status is shown in the above image.

5. Add the device

Open the eWeLink app, tap the '+' icon, and select "Bluetooth Pairing". Follow the on-screen prompts to add the device.

[eWeLink app interface showing options like 'Add Device', 'Quick Pairing', 'Scan QR code', 'Sound Pairing', 'Bluetooth Pairing'.]

Operation Guide

Drop down

Swipe down on the NSPanel screen to access settings for screen brightness and sleep time.

[NSPanel UI showing a drop-down menu with temperature (-15°C) and time (15:00), and options for screen brightness and sleep time.]

Swipe right

Swipe right to access the temperature controller function. After adding a temperature controller device in the App, you can manage it directly on the NSPanel.

[NSPanel UI showing temperature control interface with current temperature (e.g., 28.5°C) and adjustment controls (+/-).]

Swipe left

Swipe left to access and control added widgets. These widgets can represent single devices, groups of devices, or scenes.

[NSPanel UI showing a list of widgets, such as 'GSM开关', '双色灯', '多通道设备'.]

Bind Temperature Control Device

The NSPanel has a built-in temperature sensor to monitor room temperature. It can control connected coolers or heaters via smart switches or smart plugs paired with the eWeLink App.

To bind a device:

1. Access the NSPanel interface in the eWeLink App.
2. Tap "Thermostat" to select devices from the Action device list.
3. Choose one device or one channel of a multi-channel device.
4. Select "Heater" or "Cooler" as the Device type.

[eWeLink app screenshots illustrating the thermostat binding process: selecting an action device (e.g., BASICR3, T2UK2C, S31, S26) and choosing the device type (Heater/Cooler).]

After binding, you can use two modes to control temperature:

Manual mode:

Allows manual adjustment of the temperature. The NSPanel will maintain the manually set temperature.

Auto mode:

Allows setting up to 6 target temperatures. Settings execute automatically based on time duration and cannot be manually overridden unless switched to Manual mode. Bound devices will turn off outside their scheduled times.

Note on Temperature Accuracy: Actual room temperature will be within ±1°C of the set temperature. For example, if 26°C is set, the actual range is between 25°C and 27°C.

Add Widgets

NSPanel supports adding up to 8 widgets on its screen for Quick Control. Widgets can represent single devices, groups of devices, or scenes activated by a tap.

[eWeLink app screenshots showing the process of adding and managing widgets on the NSPanel.]

You can add widgets to control devices directly on the panel.

Specifications

Troubleshooting and Maintenance

Re-establish Pairing of the NSPanel

To change the NSPanel's account or connected Wi-Fi, you need to re-pair the device. Press any bottom of the device for 5 seconds until the screen indicates it has entered Bluetooth pairing mode. The NSPanel will then be available for pairing in the eWeLink App.

[NSPanel UI showing the device entering Bluetooth pairing mode.]

Note: The device will exit Bluetooth pairing mode if not paired within 3 minutes.

Factory Reset

Deleting the device from the eWeLink app restores it to factory settings.

Common Problems

Fail to pair Wi-Fi devices to eWeLink App:

1. Ensure the device is in pairing mode. Pairing mode exits automatically after three minutes of unsuccessful pairing.
2. Enable location services and grant location permission in your device settings. This is required to scan for Wi-Fi networks.
3. Verify your Wi-Fi network operates on the 2.4GHz band.
4. Confirm you have entered the correct Wi-Fi SSID and password, ensuring no special characters are used. Incorrect passwords are a common cause of pairing failure.
5. Place the device close to the router to ensure a strong signal condition during pairing.

FCC Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Note on Interference:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Declaration of Conformity

Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type NSPanel-EU, NSPanel-US is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/usermanuals

Company Information

Shenzhen Sonoff Technologies Co., Ltd.

1001, BLDG8, Lianhua Industrial Park, Shenzhen, GD, China

ZIP code: 518000

Website: sonoff.tech

MADE IN CHINA

[SONOFF logo] [FCC logo] [CE logo] [UKCA logo]