Futaba T16IZ Software Update V3 Changes

This software updates or alters the functions and features noted below. The instructions and information that follow are meant as a supplement to the original instruction manual that accompanied the T16IZ transmitter. Please refer to the original instruction manual where applicable, but replace the steps indicated below with these instructions. Please check to ensure that the update has been installed.

Select the System Menu.
Touch the [Information] button.
Confirm that the information in the display indicates the version numbers as noted above.

1. Compatible with Futaba ESC MC-980H/A, MC-9130H/A, MC-9200H/A

Supports the telemetry function of MC-980H/A, MC-9130H/A, and MC-9200H/A.

ESC telemetry display screen

The ESC status is displayed. Alarm setting is also possible.

Futaba ESC Telemetry Screen 1/2:
Model: Model1, Condition: Condit.1, Voltage: 7.8V
Current: 0.0/0.0A displayed as 0.0A
Voltage: 0.0/0.0V displayed as 0.0V
Capacity: 0/ OmAh displayed as 0mAh
Rotation: 0/ Orpm displayed as Orpm

Futaba ESC Telemetry Screen 2/2:
Model: Model1, Condition: Condit.1, Voltage: 7.8V
ESC Temperature: 0/ 0°C displayed as 0°C
Throttle: 0/0% displayed as 0%
Status: Throttle not at 0%, Over temperature, Low voltage, Over current, Motor locked, Throttle signal lost.

* The current and capacity consumption display may vary depending on the usage conditions, so use it as a guide.

2. Hobbywing ESC telemetry compatible

Supports the telemetry function installed in some Hobbywing ESCs.

The registered ESC is displayed as "Hobbywing ESC".

3. GYA553 Addition of setting parameters

AIL / ELE / RUD holding power setting has been added to the setting parameters of GYA553.

GYA553 Settings Screen:
Config: Airplane, Condition: Condit.1, Voltage: 7.8V, Page: 6/7
Holding Power:
AIL: 100
ELE: 100
RUD: 100
Description: Adjusted the gyro holding force of the aircraft in AVCS mode. Decreasing the value weakens the holding power and makes the operation feeling closer to the Normal mode.

Version Indicator: V2

1. Add GYA553 Airplane Gyro setting function.

(Refer the T16IZ GYA553 Setting Manual)

2. Compatible with SCORPION ESC telemetry

Added support for SCORPION POWER SYSTEM ESC some models.

FUTABA CORPORATION 2021, 05

	Futaba T16IZ Software Update Guide and Changes Detailed guide on how to update the Futaba T16IZ transmitter software, including procedures, troubleshooting, and information on new features and compatibility with GYA553, O.S.ENGINE EM-100, and various ESCs.
	Futaba T32MZ Software Update and Feature Changes Details on updating the Futaba T32MZ transmitter software, including new features, compatibility updates for GYA553 and ESCs, and bug fixes.
	Futaba T16IZ/T16IZ SUPER GYA553 Ver.3 Setting Manual This setting manual provides detailed instructions for configuring the Futaba GYA553 airplane gyro system with the T16IZ/T16IZ SUPER transmitter. Learn how to connect, set up, and optimize your gyro settings for various aircraft configurations.
	Futaba GYA553 Setting Manual for T16IZ/T16IZ SUPER This manual provides detailed instructions for setting up the Futaba GYA553 airplane gyro with the T16IZ and T16IZ SUPER radio transmitters, covering connection, data transfer, configuration options, and SBUS basic settings.
	Futaba R7208SB/R7308SB Software Update Manual for T16IZ/T16IZ SUPER Official software update manual for Futaba R7208SB and R7308SB receivers, compatible with T16IZ and T16IZ SUPER transmitters. Includes step-by-step instructions and update log.
	How to Update Futaba T16IZ SUPER Transmitter Software A guide on updating the Futaba T16IZ SUPER transmitter software, including procedures for transmitter updates and receiver/gyro updates. Covers potential issues and recovery steps.
	Futaba GYA553 Airplane Gyro Setting Manual for T16IZ/T16IZ SUPER This manual provides instructions for setting up the Futaba GYA553 airplane gyro with the T16IZ/T16IZ SUPER transmitter, covering connection, configuration, and operational settings.
	Futaba T10PX Software Update Guide and Feature Enhancements Comprehensive guide for updating Futaba T10PX radio transmitter software, covering firmware versions 2.0 and 2.1. Includes step-by-step update procedures, troubleshooting, UR mode setup, receiver compatibility, and new features.

T16IZ SOFTWARE UPDATE CHANGES