1.82M (6FT) Columbia Christmas Tree - Tree B

Contents

• A. Tree Top
• B. Tree Body
• C. Plastic Stand
• D. Connection Pole

Assembly Instructions

1. Slide the stabilising legs into the base of the tree trunk until firmly secure.
2. Place the tree stand on a level surface, assemble the tree stand, and insert the connection pole into the tree stand.
3. Insert Section A into Section B.
4. Lower all main branches on the bottom level and position them so they are parallel to the floor, shaping as desired.
5. For better results, straighten and separate all the small branches. Then, bend the tip end slightly upward in a 'V' shape to match the rest of the tree.

Diagram Descriptions:

• Diagram A: Illustrates the tree stand with its stabilizing legs.
• Diagram B: Shows the connection of tree trunk sections.
• Diagram C: Depicts a person assembling the Christmas tree, possibly attaching branches.
• Diagram D: Shows the plastic base stand for the tree.
• Diagram E: Shows a decorative element, likely a tree topper.

Warnings

1. This product is for indoor use only.
2. Keep the product away from fire and other heat sources.
3. It is recommended to save these instructions for future reference.

Packaging Up and Storage Tips

1. Remove all lights and ornaments from the tree.
2. Disassemble the tree into its sections, such as Section A and Section B.
3. Slide the legs down and remove them from the slots at the base of the tree trunk.
4. For each tree section, press the branches against the stem before placing it in the carton.
5. Pack the carton and store it in a dry, damp-free area.
6. Do not place the product in direct sunlight or in an area where temperatures exceed 40 degrees Celsius.