NUMLAKE TECH LIMITED CAMQ20 Wi-Fi Battery Camera User Manual

1. Introduction

Welcome to the NUMLAKE TECH LIMITED CAMQ20. This guide will help you set up and use your new Wi-Fi battery camera, designed for reliable security monitoring with the convenience of solar charging.

2. What's in the Box

• CAMQ20 Wi-Fi Battery Camera
• Solar Panel
• Mounting Bracket
• Screws and Anchors
• USB Charging Cable
• Quick Start Guide
• User Manual (this document)

3. Product Overview

The CAMQ20 camera features a high-definition lens, motion detection sensors, and two-way audio capabilities. The included solar panel provides continuous power, reducing the need for frequent battery charging.

Camera Body Description: The camera is a compact, weather-resistant unit. On the front, it features a prominent lens surrounded by an infrared (IR) illuminator ring for night vision. Below the lens are motion sensors and a status LED indicator. The back of the camera has a mounting point and a compartment for the rechargeable battery. A small microphone and speaker are integrated into the unit.

Solar Panel Description: The solar panel is a rectangular unit with a photovoltaic surface designed to capture sunlight. It connects to the camera via a waterproof cable. The panel typically includes a mounting bracket for optimal positioning towards the sun.

4. Installation Guide

Step 1: Choose a Location Select a location with a clear view of the area you wish to monitor and good sunlight exposure for the solar panel.

Step 2: Mount the Camera Use the provided mounting bracket and hardware to securely attach the camera. Ensure it is positioned to capture the desired field of view.

Step 3: Mount the Solar Panel Mount the solar panel in a location that receives direct sunlight for most of the day. Connect the solar panel cable to the camera.

Step 4: Insert Battery If not pre-installed, insert the rechargeable battery into the camera's battery compartment.

5. Setup and Configuration

Step 1: Download the App Download the NUMLAKE TECH app from your device's app store (iOS or Android).

Step 2: Create an Account Open the app and follow the on-screen instructions to create a new account.

Step 3: Add Camera Tap the '+' icon in the app to add a new device. Select the CAMQ20 model.

Step 4: Connect to Wi-Fi Follow the app's instructions to connect the camera to your 2.4GHz Wi-Fi network. This typically involves scanning a QR code displayed on your phone with the camera.

Step 5: Finalize Setup Once connected, the camera will appear in your app. You can now configure settings such as motion detection sensitivity, notification preferences, and recording schedules.

6. Using the Camera

The NUMLAKE TECH app allows you to:

• View live video streams from the camera.
• Receive motion detection alerts.
• Access recorded footage (cloud or local storage, depending on model features).
• Communicate via two-way audio.
• Adjust camera settings and modes.

7. Troubleshooting

Issue: Camera not connecting to Wi-Fi.

• Ensure your Wi-Fi network is 2.4GHz.
• Check your Wi-Fi password is correct.
• Move the camera closer to the router during setup.
• Restart your router and the camera.

Issue: Solar panel not charging the battery.

• Ensure the solar panel is clean and free from obstructions.
• Verify the panel is positioned for maximum sunlight exposure.
• Check the connection between the solar panel and the camera.

Issue: Motion detection not working.

• Adjust the motion detection sensitivity in the app settings.
• Ensure the PIR sensor is not obstructed.
• Check the camera's power status.

8. Specifications

9. Safety Information

• Use only the provided power adapter and cable for initial charging if necessary.
• Do not expose the camera or solar panel to extreme temperatures beyond the specified range.
• Keep the camera and its accessories away from small children.
• Ensure proper ventilation around the camera and solar panel.
• Do not attempt to disassemble or repair the camera yourself. Contact customer support.