iHome iAVS1 Quick Start Guide

iHome iAVS1 Bedside Stereo Speaker System for Amazon Echo Dot

Quick Start Guide

In the Box

  • iAVS1 unit
  • USB charging cable
  • Universal voltage adapter
  • Amazon Echo Dot insert

Device Overview

The iAVS1 unit features several components for setup and operation:

Top View:

  • Amazon Echo Dot Dock: Where the Echo Dot is placed.
  • Display Dimmer Button: Used to adjust the clock display brightness.

Bottom View:

1 Clock Setting Button
Press and hold to start clock setting. Adjust with +/- Buttons. Press again to complete clock setting. Note: Alexa cannot set the clock.
2 & 3 +/- Setting Buttons
Press to adjust clock during setting (hold for rapid adjust). Pressing both together switches between 12-hour and 24-hour display.
4 Backup Battery Compartment
Unscrew door with a Phillips screwdriver. Insert 2 AAA batteries (included) to maintain clock settings during power interruptions.
5 Dot USB Charge Port
Connects the USB charging cable to the Echo Dot.

Back View:

6 Hardwired Aux cable
Connects to the Echo Dot's Aux jack for audio output.
7 DC Jack
Connects the AC power adapter to power the unit.
8 USB Charge Device Port
A standard USB port for charging other devices.
9 Rear Cover
Covers the back panel components.

10 AC Adapter: Connects to the DC Jack (7) to power the unit.

Connecting to Your Amazon Echo Dot

Docking Your Amazon Echo Dot

Align the rear of the Amazon Echo Dot (the side with the USB port and Aux Jack) with the opening in the provided insert. Place both into the iAVS1 dock well, ensuring the ports face the back.

Powering the Amazon Echo Dot

Connect the included USB charging cable to the Dot USB Charge Port (5) on the iAVS1. Pass the other end of the cable through the designated slot and connect it to the Echo Dot's USB port. Then, connect the AC power adapter (10) to the DC jack (7) on the iAVS1.

Playing Amazon Echo Dot Audio

Connect the built-in Aux-in cable (6) on the back of the iAVS1 to the Aux jack of your Amazon Echo Dot. You can now ask Alexa to access Echo Dot functions, and the audio will play through the iAVS1.

Volume Control

Use the volume control on the Amazon Echo Dot itself to adjust the audio level to your preference. Alternatively, you can use Alexa voice commands such as "Alexa, set volume to 5", "Alexa, turn up/down the volume", "Alexa, stop", "Alexa, mute", or "Alexa, unmute".

Using the Dimmer Button

To adjust the clock display brightness, touch the Dimmer Button located on the top of the unit. This cycles through 8 levels of brightness, from High to Off.

Regulatory Information

FCC Information

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, users are encouraged to try correcting it by reorienting or relocating the receiving antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer or technician.

FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

Canada Statement (CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to two conditions: (1) this device may not cause interference; and (2) it must accept any interference, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

Warnings and Disposal

Disposal of Unit

Do not attempt to change the battery, as this will void the warranty and may cause injury or damage. To dispose of the unit:

  • Never dispose of used batteries/electronics with ordinary solid wastes due to toxic substances.
  • Always dispose of used batteries/electronics according to prevailing community regulations.
  • Many electronics retailers offer free recycling for batteries and electronic components.

General Battery Precautions

  • Never use or charge a battery that appears leaking, discolored, deformed, or abnormal.
  • Never disassemble the unit or attempt to remove the battery, as this could cause leakage of alkaline solution or other electrolytic substances.
  • Avoid charging rechargeable batteries when the temperature is outside the range of 5°C - 35°C (41° - 95° Fahrenheit).
  • Never expose a battery to any liquid.
  • Never expose a battery to excessive heat, such as direct sunlight or fire.
  • Never use a battery pack in an unventilated vehicle where excessive internal temperatures may be encountered.
  • Always keep batteries out of the reach of infants and small children.

Support

For full warranty and instructions, visit: www.ihome.com/support

Contact: ? 1-800-288-2792

Trademarks

Amazon, Alexa, Echo Dot, and all related logos are trademarks of Amazon.com, Inc. or its affiliates.

PDF preview unavailable. Download the PDF instead.

91VINXtjp-L Adobe Illustrator CC 2017 (Macintosh) Adobe PDF library 15.00

Related Documents

Preview iHome iAV5 Color Changing Bluetooth Speaker System for Amazon Echo Dot - Quick Start Guide
Concise guide to setting up and using the iHome iAV5 Color Changing Bluetooth Rechargeable Stereo Speaker System with Amazon Echo Dot, including FCC information, setup instructions, and operational details.
Preview iHome iAVS16 Smart Speaker User Manual and Guide
Comprehensive user manual for the iHome iAVS16 Bluetooth Stereo Speaker with Alexa integration. Learn about setup, controls, features, troubleshooting, and safety information.
Preview iHome iBT372 Waterproof & Shockproof Bluetooth Speaker User Manual
Get the most out of your iHome iBT372 with this comprehensive user manual. Learn about its IP67 waterproof and shockproof design, Bluetooth pairing, audio playback, speakerphone features, and essential maintenance for this wireless stereo speaker.
Preview iHome iBT500 Waterproof Floatable Wireless Speaker Quick Start Guide
A quick start guide for the iHome iBT500 Waterproof Floatable Wireless Speaker, covering setup, Bluetooth pairing, speakerphone functionality, and waterproof operation.
Preview iHome iBT68 Color Changing Rechargeable Bluetooth Speaker User Manual
User guide for the iHome iBT68, a color-changing rechargeable Bluetooth speaker with speakerphone functionality. Learn about setup, pairing, audio playback, speakerphone operation, color modes, charging, and troubleshooting.
Preview iHome IBT395 Dual Alarm Clock: Setup, Features, and Safety Guide
Comprehensive instruction sheet for the iHome IBT395 Dual Alarm Clock with Bluetooth Speaker and USB Charging. Covers setup, alarm functions, sleep mode, Bluetooth pairing, safety warnings, and regulatory information.
Preview iHome TIMEBASE iBTW20: Quick Start Guide for Wireless Charging Stand & Speaker
Get started with your iHome TIMEBASE iBTW20. This guide covers setup, alarm setting, wireless and USB charging, Bluetooth connectivity, and safety instructions for your dual-charging alarm clock and speaker.
Preview iHome iBTW20 TIMEBASE Wireless Charging Stand + Speaker Quick Start Guide
This guide provides instructions for setting up and using the iHome iBTW20 TIMEBASE, a wireless charging stand and speaker. Learn how to connect via Bluetooth, set the time and alarm, utilize wireless and USB charging, and understand safety precautions.