iHome TIMEBASE iBTW20

Features & Functions

This section details the components and controls of the iHome TIMEBASE iBTW20.

Front Panel:

• TIME SET: Press and hold to set the clock. Adjust time using the +/- buttons and confirm by pressing the Time button. Repeat this process for year, month, and date.
• ALARM SET: Press to preview the alarm. Press again to arm or disarm the alarm. Press and hold to set the alarm time; adjust using +/- buttons and confirm with the Alarm button.
• PLUS: Increases volume or adjusts settings.
• MINUS: Decreases volume or adjusts settings.
• Quick Start Guide: For questions, visit www.ihome.com.
• POWER/ALARM RESET: Press to turn the unit ON/OFF. Press to reset a sounding alarm.
• PLAY/PAUSE: Press to play/pause audio or answer calls. Press and hold to end or ignore a call. Press and hold to activate Google/Siri.
• Snooze (?): Press to snooze a sounding alarm. Press and hold to adjust the snooze duration (1-29 minutes) using +/- buttons and confirm with the ZZZ button. Press to adjust display brightness.

Bottom Panel:

• Battery Backup Compartment: Houses a CR-2450 battery to maintain clock accuracy and alarm operation during power interruptions. Remove the battery pull tab before initial use.

Back Panel:

• DC Jack for power supply (9V/3A): Connect the included AC adapter here.
• USB Charging (5V/1A): A port for charging external devices via a USB cable.
• DST Switch (Daylight Savings ☀️): Set to 'Auto' for automatic time updates twice a year. Manually adjust by switching to '-1' to lose an hour or '+1' to gain an hour.
• Bluetooth Pairing Button/LED (?): Press and hold this button to enter Bluetooth pairing mode.

Display Icons:

• PM Indicator: Appears to the left of the display when the alarm time is set for PM.
• Low Backup Battery Indicator (?): Flashes when the backup battery needs to be replaced.
• Alarm Indicator (⏰): Appears on the display when an alarm is armed.

Getting Started

Step One: Connecting the Unit

Before initial use, remove the battery pull tab from the bottom of the unit. Connect the included AC adapter to the DC jack on the back of the unit and plug the other end into a working wall outlet.

Step Two: Connecting to Bluetooth (?)

• Turn on your Bluetooth-enabled device and make it discoverable by enabling its Bluetooth mode.
• Press and hold the Bluetooth Pairing Button on the TIMEBASE until it enters pairing mode.
• On your device's Bluetooth menu, select 'iHome iBTW20' to establish a connection.

Step Three: Setting the Time

• Press and hold the Time Button until the clock display begins to flash.
• Use the +/- Buttons to adjust the time. Press the Time Button to confirm the set time.
• The year will flash; use the +/- Buttons to adjust the year and press the Time Button to confirm.
• The month will flash; use the +/- Buttons to adjust the month and press the Time Button to confirm.
• The date will flash; use the +/- Buttons to adjust the date and press the Time Button to confirm all settings.

Ensure the correct AM/PM time is set. The PM indicator will appear on the left side of the display. To toggle the clock display between 12-hour and 24-hour formats, press the Alarm Button while the display is flashing during the time setting process.

Setting the Alarm

Each step must be completed while the display is flashing, or the setting will time out without any changes being saved.

1. Press and hold the Alarm Button (⏰) for 2 seconds until the alarm time display and the alarm icon flash.
2. Use the +/- Buttons to adjust the alarm time to your desired setting (hold for rapid adjustment). Ensure the correct AM/PM alarm time is set. The PM indicator appears to the left of the display.
3. Press the Alarm Button to confirm the alarm time. The alarm schedule will flash (options are 7 for every day, 5 for weekdays, or 2 for weekends). Use the +/- Buttons to select your preferred alarm schedule.
4. Press the Alarm Button to confirm the alarm schedule. Now, use the +/- Buttons to set the wake-up source:
   • Tones: Wake to built-in tones. Use the +/- Buttons to cycle through available tones.
   • Bluetooth (?): Wake to audio from a connected Bluetooth device.
   • Beep: Wake to a standard beeping sound.
5. Press the Alarm Button to confirm the wake source. Use the +/- Buttons to control the alarm volume. Press the Alarm Button once more to confirm all settings. Two beeps will confirm that the alarm setting is complete. The alarm icon (⏰) will remain on the display, indicating the alarm is armed.
6. To turn off a sounding alarm and reset it to come on the next day at the same time, press the Alarm Button.

Previewing the Alarm

Press and release the Alarm Button as needed to preview the set alarm and to toggle the alarm ON (indicated by the ⏰ icon) or OFF (no ⏰ icon is displayed).

Programmable Snooze (?)

1. To program the snooze function, press and hold the ZZZ Button during normal operation (when no alarm is currently sounding).
2. Use the +/- Buttons to select a desired snooze time, ranging from 1 to 29 minutes.
3. Press the ZZZ Button to confirm the snooze setting. When an alarm is sounding, press down on the ZZZ Button to temporarily silence it (the default snooze duration is 9 minutes).

Wireless Charging

Supports Qi compatible phones. This feature also works with plastic cases up to 3mm thick*.

Place your Qi compatible device face up on the designated charging rest.

Wireless Charging Area

This is the top surface of the unit where the phone is positioned for wireless charging.

Wireless Charging Status LED

Check the LED located under the iHome badge for the status of wireless charging:

• Slow blinking LED: Indicates the device is charging properly.
• Solid LED: Indicates the device is fully charged.
• Rapid blinking LED: Indicates the device is not charging properly. Reposition the device on the charging stand.

Note: The LED may continue to blink slowly even when iOS devices are fully charged.

CAUTION:

• Before charging, remove any metal protective or magnetic cases from your phone.
• When charging a phone, do not place magnetic-striped or other metal objects on the charger. Doing so could damage the object or this unit.
• Qi compatible phones with metallic-looking finishes will charge normally.
• Some larger phone cases may interfere with charging; remove the case to ensure proper charging.

USB Charging (?)

Connect the standard size end of a USB cable (not included) to the USB port located on the back of the unit. Connect the other end to the charging port on your device. Ensure the unit is plugged into a working wall outlet to charge external devices.

Battery Back-up (?)

The unit comes equipped with a CR-2450 backup battery to ensure continuous alarm operation and clock settings in the event of a temporary power failure. Remove the battery pull tab before initial use. When the battery icon flashes on the clock display, it is time to replace the backup battery. The battery compartment is located on the bottom of the unit.

1. Make sure the AC adapter is connected to the unit. This prevents loss of time and alarm settings during battery replacement.
2. Use a Phillips screwdriver to open the battery compartment door.
3. Remove the exhausted battery from the compartment and insert one new CR-2450 battery, ensuring the '+' side is facing you. Replace the compartment door. Do not overtighten the screws.

WARNING:

Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire, or high temperatures. Do not place loose batteries in pockets, purses, or containers with metal objects. Do not mix with used or other battery types, or store with hazardous or combustible materials. Store in a cool, dry, ventilated area. Follow applicable laws and regulations for transport and disposal.

• Do not ingest the battery; it presents a Chemical Burn Hazard. This product contains a coin/button cell battery. If swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you suspect batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• Attention should be drawn to the environmental aspects of battery disposal.

Important Safety Instructions

When used as directed, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read and follow all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.

1. Water and Moisture: The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool, or in a wet basement.
2. Ventilation: The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug, or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings.
3. Heat: The unit should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
4. Power Sources: The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. Only use the AC adapter that came with the unit.
5. Power-Cable Protection: Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket.
6. Cleaning: Clean only with a dry cloth.
7. Objects and Liquid Entry: Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product.
8. Attachments: Do not use attachments not recommended by the product manufacturer.
9. Lightning and Power Surge Protection: Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges.
10. Overloading: Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
11. Damage Requiring Service: The unit should be serviced by qualified service personnel when: A. the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled into the enclosure. C. the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. E. the unit exhibits a marked change in performance or does not operate normally.
12. Periods of Nonuse: If the unit is to be left unused for an extended period of time, such as a month or longer, remove batteries before storage.
13. Servicing: The user should not attempt to service the unit beyond those methods described in the user manual. Service methods not covered in the operating instructions should be referred to qualified service personnel.
14. Magnetic Interference: This product’s speakers contain powerful magnets which could cause interference or damage to sensitive equipment such as hard drives, CRT televisions and monitors, as well as medical, scientific, and navigational devices. Keep this unit away from these products at all times.
15. Attachments/Accessories: Only use attachments/accessories specified by the manufacturer. This product is suitable for use in tropical and/or moderate climates.
16. Enclosure Damage: The unit should be serviced by qualified service personnel when the enclosure is damaged or does not operate normally.
17. Naked Flames: No naked flame sources, such as lighted candles, should be placed on the apparatus.
18. Rain or Moisture: WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
19. Battery Replacement: CAUTION – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
20. Battery Disposal: Do not dispose of batteries in the household trash or fire.
21. Mains Plug: The mains plug of the power adapter is used as the disconnect device; it shall remain readily operable.

Limited One Year Warranty

iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service.

If service is required, please visit ihome.com/support for more information. A copy of the sales receipt is required to validate in-warranty coverage.

Disclaimer of Warranty:

NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.

This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI product.

© 2019 SDI Technologies, Inc. All rights reserved.