Vieta Pro Party 22 QuickStart Guide
Guía rápida
What's In The Box
Qué hay en la caja
- QuickStart Guide
- Safety & Warranty Information
- Remote Control
- Power Cable
- Microphone (x2)
- Vieta Pro Party 22 Speaker
Charge
Carga
Connect the power cable to the speaker's power input and a wall outlet. The battery level indicator shows the current charge status.
Basic Use
Uso Básico
- 1. Power: Press to turn the speaker ON or OFF.
- 2. Light Mode: Press to cycle through different light modes.
- 3. Volume Up: Press to increase the master volume.
- 4. Volume Down: Press to decrease the master volume.
- 5. Mode: Press to switch between Bluetooth, Line In, FM Radio, and USB modes.
- 6. Disconnect Bluetooth: Press to disconnect the current Bluetooth device.
- 7. Play/Pause: Press to play or pause the current track.
- 8. Next Track: Press to skip to the next track.
- 9. Previous Track: Press to go back to the previous track.
- 10. Phone/Tablet Support: Area to place your mobile device.
- 11. Bass Boost: Press to enhance the bass output.
- 12. Microphone Inputs (x2): Connect microphones here.
- 13. Inputs: Ports for Line In (3.5mm minijack), TF Card, and USB-A.
- 14. Volume Knob: Master volume control.
Pro Use
Uso Profesional
- Microphone Control: Use the dedicated controls for microphone volume and echo effect.
- Adjust Sound Curve: Fine-tune audio settings like Treble, Bass, Mic Volume, and Mic Echo.
- Bluetooth Management: Disconnect multiple Bluetooth devices if necessary.
Remote Control
Mando a distancia
- 1. MODE LIGHT REPEAT: Controls playback modes, lighting, and repeat functions.
- 2. MIC TURN ON / OFF: Toggles the microphone input on or off.
- 3. MIC ECHO ADJUST: Adjusts the echo effect for the microphone.
- 4. MIC VOLUME: Controls the volume level for the microphone.
- 5. RECORDING WITH USB/TF/SD CARD: Allows recording audio to a connected USB, TF, or SD card.
- 6. SPEAKER TURN OFF / ON: Powers the speaker on or off.
- 7. MEDIA CONTROL: Play/Pause, Next Track, Previous Track functions.
- 8. MASTER VOLUME: Adjusts the overall volume of the speaker.
- 9. NUM PAD. MEDIA SONG SELECT: Use the number pad to select specific tracks or modes.
TWS (True Wireless Stereo)
Pair two Vieta Pro Party 22 speakers wirelessly for a stereo sound experience. Follow the on-screen prompts or refer to the full manual for detailed pairing instructions.
Tech Specs
Feature | Specification |
---|---|
Bluetooth | 5.3 |
Transmission distance | 15 m |
TWS distance | < 4 m |
Power Output | 500 W RMS |
Drivers | 8"+8" + 2" |
Frequency response | 20 Hz - 20 KHz |
Mic frequency | 267.3 MHz |
Mic Transmission Distance | 15 m |
Battery | Lead-Acid 12 V 7500 mAh |
Charge time | 6-8h |
Power supply | AC 220-240 V |
Power adapter | No |
Play time | 10 h |
USB power | 5 W |
Inputs | Mic TRS 1 & 2, Line In 3,5 mm minijack, USB 2.0, TF Card |
Size | 360x365x785mm |
Weight | 12 KG |
Important Information
Battery Lifespan: To prolong battery life, fully charge at least once every 3 months. Battery life varies with usage and environmental conditions.
Water Exposure: Do not expose the Vieta Pro product to liquids without removing all cable connections and closing the cap tightly. Do not expose the product to water while charging, as this may cause permanent damage.