Manuals+
Vieta Pro Round Up 2 Bluetooth Speaker User Manual | VM-BS26

Round Up 2 Speaker

Model: VM-BS26

Support

Problems with your product? Contact us at:

Email: vieta@letmerepair.es

Phone: 952 179 479

Introduction

Thank you for purchasing the outdoor Bluetooth Round Up 2 speaker VM-BS26. To ensure correct operation, please read this user manual carefully before operation.

About Vieta Pro

This product has been designed and developed under the professional standards of VIETA PRO, founded by the Brothers in 1954. With over 60 years of history and the motto "The avocation and respect for art of music," Vieta has achieved a privileged place in the electronics market through constant effort and passion. VIETA PRO models are based on professional sound, prioritizing quality, durability, and sound standards above commercial consumer electronics. Developed by engineer Jordi Hernández, with over 40 years of experience, VIETA PRO models are built with precise components to deliver purity and uniqueness.

1. Product Diagram

The speaker features the following components:

  • Top Panel: [Volume Up/Next Track Button], [Volume Down/Previous Track Button], [Play/Pause Button / Voice Assistant Button], [Power Button]
  • Side Panel: [LED Indicator], [AUX Port], [Type C Charging Port], [Microphone]

2. Button Functions

  • [Power Button] (①):
    • Long press: Power on/off the speaker.
    • Short press: Change modes (Bluetooth, FM, Aux in).
  • [Play/Pause Button / Voice Assistant Button] (▶️):
    • Short press: Play/pause music, pick up/hang up a call.
    • Long press 2 seconds: Reject a call.
    • Long press 3 seconds: Disconnect Bluetooth pairing.
    • Double click: Activate the mobile's voice assistant.
  • [Volume Down Button] (-):
    • Short press: Decrease volume.
    • Long press: Previous track.
  • [Volume Up Button] (+):
    • Short press: Increase volume.
    • Long press: Next track.
  • [Volume Up Button] (+) and [Volume Down Button] (-) together:
    • Long press + and - together for 2 seconds: Enter TWS pairing mode.
    • Long press + and - together for 2 seconds: Disconnect TWS pairing.

3. Bluetooth Mode

  • Bluetooth Version: 5.0, supports HSP, HFP, A2DP, AVRCP profiles. Pairing name: "Vieta Pro Round Up 2".
  • Pairing: Long press the [Power Button] to turn on the speaker; it enters Bluetooth pairing mode with the blue LED flashing quickly. Search for "Vieta Pro Round Up 2" in your phone's Bluetooth list and connect. The blue LED will stay lit upon successful connection.
  • Playback: The blue LED light flashes slowly during music playback (light on and off for one second). Short press the [Play/Pause Button] to stop music; the blue LED stays lit.
  • Volume & Track Control: Short press [Volume Up Button] / [Volume Down Button] for volume adjustment. Long press [Volume Up Button] / [Volume Down Button] (2 seconds) to change to the next/previous track. A "Max Volume" sound is heard at maximum and minimum volume levels.
  • Call Handling: Short press [Play/Pause Button] to pick up or hang up a call. Long press [Play/Pause Button] to reject a call.
  • Disconnecting: Long press [Play/Pause Button] to disconnect Bluetooth pairing, indicated by a "Disconnected" sound and a quickly flashing blue LED.
  • Voice Assistant: Double click the [Play/Pause Button] to activate the mobile's voice assistant.
  • Powering Off: Long press the [Power Button] to turn off the speaker; the LED light goes out.
  • Auto-Reconnect: When turned on again, the speaker will automatically reconnect to the last paired device.

4. TWS Function (True Wireless Stereo)

(Only available in Bluetooth mode)

To activate TWS:

  1. Enter Bluetooth mode on the main speaker (master) and pair your device. You can start audio playback before activating TWS.
  2. Turn on the secondary speaker and enter Bluetooth mode. Ensure the secondary speaker is not connected to any other device.
  3. Press and hold the [Volume Up Button] and [Volume Down Button] on the master speaker to enter TWS pairing mode.
  4. Once paired, the speakers will emit a confirmation tone.

To deactivate TWS:

  • Press and hold the [Volume Up Button] and [Volume Down Button] on any speaker. The speakers will emit a confirmation tone once unpaired.

5. AUX IN Mode

  • Turn on the speaker and plug in the audio cable. The speaker will enter "Aux in mode" with an audible notification.
  • During playback, the blue LED light flashes slowly (light on and off for one second). Short press the [Play/Pause Button] to pause music; the blue LED stays lit. Short press the [Play/Pause Button] again to restart playback. Short press the [Volume Up Button] / [Volume Down Button] for volume adjustment.

6. FM Mode

  • Turn on the speaker and short press the [Power Button] to switch to FM mode, indicated by "FM Radio Mode" sound and a slowly flashing blue LED.
  • Long press the [Power Button] to start auto-scan. The speaker will play the first station automatically upon completion of the scan.
  • Long press the [Volume Up Button] / [Volume Down Button] to change to the next/previous stored station.
  • Short press the [Volume Up Button] / [Volume Down Button] for volume up/down.
  • Short press the [Play/Pause Button] to pause FM playback; the blue LED will stay lit.

7. USB Playback

  • Connect your USB drive to the speaker using the provided OTG cable. The speaker will play music automatically.
  • Short press the [Volume Up Button] / [Volume Down Button] for volume adjustment.
  • Long press the [Volume Up Button] / [Volume Down Button] to change to the next/previous track.
  • Short press the [Play/Pause Button] to pause/play music.

8. Charging

  • Connect the charging cable (Type-C) to the speaker. The red LED light will stay lit while charging and will turn off once fully charged.
  • Low Battery Warning: When the battery voltage drops below 3.3V (below 15% capacity), the speaker will enter a "battery Low" alarm state, alarming every 30 seconds and powering off automatically after 5 alarms. Please charge the speaker promptly when the first "battery Low" alarm is heard.

9. Automatic Power-off Function

If there is no active connection for over 10 minutes, the speaker will automatically turn off to conserve battery.

10. Product Information

  • Model: Vieta Pro Round Up 2
  • BT Version: 5.0
  • Dimensions: 76*41*101mm
  • Product Weight: 230g
  • Inputs: AUX in
  • Battery: 3.7V 1800mAh
  • Speaker Driver: 4ohm 5W
  • Power Supply: Type C 5V/1A
  • Waterproof Rating: IPX7

Declaration of Conformity

Issuer's Name: FRAMASON AUDIO S.A

Address: Av. de Pau Casals 7, Entresuelo 2- 08021 Barcelona (España)

Tel: +34 93 1162491

CIF: A62829841

We declare under our own exclusive responsibility that the product:

  • Description: Bluetooth Speaker
  • Brand: Vieta Pro
  • Model: VM-BS26
  • Manufacturer: FRAMASON AUDIO S.A
  • Manufacturing Country: China

referred to in this declaration is in compliance with the essential norms and standards:

  • EN 62368-1:2014 + A11:2017
  • EN 301 489-1 V2.2.0 (2017-03)
  • EN 301 469-17 V3.2.0 (2017-03)
  • EN 55032:2015
  • EN 55035:2017
  • EN 300 328 V2.2.0 (2017-11)
  • EN 303 345 V1.1.7 (2017-03)
  • EN 62311:2008

in conformity with the provisions of the Directive 2014/53/EU of the European Parliament and of the Council of 16th April 2014.

Barcelona, 1 March 2019

Carlos Alberdi
Product Manager

CE

Models: VM-BS26, Round Up 2 Speaker

File Info : application/pdf, 14 Pages, 621.11KB

PDF preview unavailable. Download the PDF instead.

english manual VM-BS26 compressed Adobe Illustrator 24.1 (Macintosh) www.ilovepdf.com

Related Documents

Preview Vieta Pro Thunder 2 Portable Wireless Speaker Declaration of Conformity
Declaration of Conformity for the Vieta Pro Thunder 2 portable wireless speaker (Model: VM-BS110) by FRAMASON AUDIO S.A., confirming compliance with EU directives and various safety and electromagnetic compatibility standards.
Preview Vieta Pro MiniThunder 2 Portable Wireless Speaker Declaration of Conformity
Declaration of Conformity for the Vieta Pro MiniThunder 2 portable wireless speaker (Model: VM-BS100), manufactured by FRAMASON AUDIO S.A. This document confirms compliance with relevant European standards and directives.
Preview Declaration of Conformity: Vieta Pro Boom 2 Portable Wireless Speaker
Declaration of Conformity for the Vieta Pro Boom 2 portable wireless speaker, manufactured by FRAMASON AUDIO S.A., confirming compliance with relevant European directives and standards.
Preview Vieta Pro Goody 4 Portable Wireless Speaker - Declaration of Conformity
Declaration of Conformity for the Vieta Pro Goody 4 portable wireless speaker (Model: VM-BS48), issued by FRAMASON AUDIO S.A. This document confirms compliance with relevant European directives and international standards.
Preview Vieta Pro Easy 4 Portable Wireless Speaker Declaration of Conformity
Declaration of Conformity for the Vieta Pro Easy 4 portable wireless speaker (Model: VM-BS38), manufactured by FRAMASON AUDIO S.A. This document confirms compliance with relevant European directives and standards.
Preview Declaration of Conformity for Vieta Pro Sun Portable Wireless Speaker VM-BS3
This document confirms the conformity of the Vieta Pro Sun portable wireless speaker (Model: VM-BS3) manufactured by FRAMASON AUDIO S.A. to various European Union directives and international standards.
Preview Declaration of Conformity - Vieta Pro Hurricane VM-HW1000
FRAMASON AUDIO S.A. declares the conformity of the Vieta Pro Hurricane VM-HW1000 portable wireless speaker with EU directives and essential standards.
Preview Vieta Pro Goody 2 Bluetooth Speaker User Manual
Comprehensive user manual for the Vieta Pro Goody 2 outdoor Bluetooth speaker (Model VM-BS46), covering features, technical specifications, operation, and troubleshooting.