Hilti X-DFC-W 8 MX Fastening Tool

General Information & Limitations

The tool is designed for specific fastening applications. It is not intended for use in wet conditions (??) or outdoor environments (??).

Tool Compatibility

The tool is compatible with the following Hilti models: BX 3-ME and GX 3-ME.

Step 1: Preparation & Safety

Ensure proper handling and adherence to all safety precautions before commencing operation. A checkmark symbol [✔️] indicates correct procedure.

Step 2: Overhead Fastening

When fastening to overhead structures, ensure correct placement and secure fastening. A checkmark [✔️] denotes a correct fastening, while a cross mark [❌] indicates an incorrect fastening. A warning triangle [⚠️] highlights potential hazards.

Step 3: Fastening Process

Apply the tool with the correct direction and force. The '2x' symbol suggests a required repetition or force multiplier for secure fastening.

Step 4: Fastener Insertion

Insert fasteners correctly. A safety exclamation mark [❗] and a weight limit of 5kg are indicated. Ensure the fastener is properly seated; a checkmark [✔️] denotes correct insertion, and a cross mark [❌] denotes incorrect insertion.

Step 5: Operation Sequence

Follow the indicated sequence for operation. Step 1 involves positioning the tool, followed by Step 2, which produces a 'click' sound indicating successful fastening.

Step 6: Angled Operation

The tool can be operated at a 90° angle. The '2x' and '3x' symbols indicate the number of repetitions or specific settings required for optimal fastening in this configuration.

Product Details

Quantity: 200x (This may refer to package quantity or a specific product variant.)

Made in China

Hilti = trademark of Hilti Corp., Schaan, LI