Hilti X-SC-FE MX Fastening System

Step 1: Tool Placement and Compatibility

Position the Hilti fastening tool correctly on the surface. A checkmark ✔️ indicates correct placement, while a prohibition symbol ? indicates incorrect placement.

Compatible fasteners for this system include:

• BX3-ME-A22
• BX3-ME-22
• BX4-ME-22
• X-FG-FE

Step 2: Fastening to Concrete Ceiling

The tool is used to drive a fastener into a concrete ceiling. Exercise caution, as indicated by the warning symbol ⚠️.

Step 3: Clip Installation

A fastening clip is attached to a concrete surface using fasteners. Typically, two fasteners (2x) are used per clip. A warning symbol ⚠️ is displayed, advising caution.

Step 4: Fastener Orientation Guide

This step illustrates the correct and incorrect orientations for using specific fasteners with the tool:

• BX4-ME-22: Correct (✔️), Incorrect (?)
• BX3-ME-22: Correct (✔️), Incorrect (?)
• BX3-ME-A22: Correct (✔️), Incorrect (?)

Step 5: Fastener Insertion and Load Limit

Ensure fasteners are inserted correctly into the surface (✔️ for correct, ? for incorrect). A maximum load limit of 2kg is indicated for the fastener or connection.

Step 6: Fastening Mechanism Operation

The fastening process involves positioning the tool head (1), followed by a "click" sound, and then the fastener is driven into the material (2).

Step 7: Multiple Fasteners and Angle

This step demonstrates fastening with multiple fasteners. A fastener is inserted (1), and a second fastener is inserted at a 90° angle (2). This configuration may use 2x or 3x fasteners.

Final Installation View

The image shows multiple fasteners installed in a concrete ceiling, securing components. The system is identified as 5×X-SC-FE MX.