TROTEC PAC 3910 X Mobile App Control

1. Download and Install App

CAUTION: The QR codes provided here are solely for downloading the Nethome Plus app and are different from any QR codes included with the unit.

For Android users: Scan the Android QR code or go to the Google Play Store. Search for the 'Nethome Plus' app and download it.

For iOS users: Scan the iOS QR code or go to the App Store. Search for the 'Nethome Plus' app and download it.

[QR code for Android download] [QR code for iOS download]

2. Preparation

Before proceeding with user registration and network configuration, ensure the following:

• Your mobile device is connected to a Wireless router.
• The Wireless router has already been connected to the Internet.
• Your mobile device is connected to the specific Wireless network you intend to use for the air conditioner.
• Forget any other irrelevant Wireless networks on your mobile device to prevent interference with the configuration process.

3. Create Account

Reminder: When you register to use the app, you must read and agree to the Data Privacy Notice.

Follow these steps to create your account:

1. Click the "Create Account" button within the app.
2. Enter your email address and desired password.
3. Click "Register".

The app interface will guide you through the process, showing options to sign in with Apple, Facebook, or Twitter accounts, or to create a new account using your email.

[Visual description of app screens for account creation]

4. Network Configuration

Cautions:

• It is essential to forget any other nearby networks and ensure your Android or iOS device is connected only to the Wireless network you intend to configure.
• Verify that your device's Wireless function is working correctly and can automatically reconnect to your original Wireless network.

Kindly Reminder:

• You must complete all network configuration steps within 8 minutes after powering on the air conditioner (AC). Otherwise, you will need to power it on again.

Using Android or iOS device to do network configuration:

Ensure your mobile device is connected to the desired Wireless network and that other irrelevant networks are forgotten.

1. Disconnect the power supply of the air conditioner.

2. Connect the power supply of the AC and activate AP mode. The display will show "AP" when the AC WIRELESS has entered AP Mode.

3. Carry out the network configuration by selecting the device type.

Network configuration steps:

1. Please select the appliance type (e.g., Portable AC).
2. Follow the on-screen steps to enter "AP" mode. This typically involves powering on the device and waiting, then pressing a specific button (e.g., "SWING") for more than 3 seconds until "AP" appears on the display.
3. Choose the network configuration method: "Scan QR code on the unit" or "Manual Setup".
4. If using "Manual Setup" (Android system only): Connect your phone to the device's temporary network (e.g., "net_ac_xxxx") using the provided password (e.g., "12345678").
5. Select your home Wireless network (family WLAN) and enter its password.
6. The network configuration is successful. Your device will appear in the list within the app.

NOTE: Step 4 (connecting to the device's network) is applicable to Android systems only; iOS systems do not require this step.

After Configuration:

The device name (e.g., "air conditioner_AC28") can be changed within the app to a more recognizable name like "PAC 3910 X".

Upon successful configuration, the app should display success messages. Due to varying Internet environments, the device status might initially show as "offline". To resolve this, refresh the device list in the app or power cycle the device (turn it off and then on again). The status should update to "online" within a few minutes.

5. Connection to Alexa

To connect your TROTEC PAC 3910 X with Amazon Alexa:

1. Ensure you have the Amazon Alexa app installed and your devices are connected.
2. Open the Alexa app and navigate to "Skills & Games".
3. Search for the "NetHome Plus" skill.
4. Select "NetHome Plus Smart Home Skill" to view details.
5. Tap "ENABLE TO USE" to proceed to the authorization page.
6. Link your NetHome Plus account to your Alexa account by tapping "Agree and Link".
7. Your NetHome Plus account will then be successfully linked.

You can now add your devices in the Alexa app and use voice commands for control.

6. Connection to Google Home

To connect your TROTEC PAC 3910 X with Google Home:

1. Ensure you have the Google Home app installed and your devices are connected.
2. Open the Google Home app and tap "Set up device" > "Works with Google".
3. Search for "NetHome Plus".
4. Select "NetHome Plus" to navigate to the authorization page.
5. Link your NetHome Plus account to your Google account by tapping "Agree and Link".
6. Your NetHome Plus account will then be successfully linked.

You can now add your devices in the Google Home app and use voice commands for control.

7. App Declaration

Applicable System: iOS, Android.

The app may not support the latest software versions of Android and iOS systems. Compatibility issues may arise, and Trotec is not responsible for any problems resulting from such incompatibilities.

Wireless Safety Strategy:

• The smart kit supports WPA-PSK/WPA2-PSK encryption and no encryption.
• WPA-PSK/WPA2-PSK encryption is recommended for security.

Cautions:

• Due to varying network conditions, control processes may sometimes result in time-outs. This can lead to discrepancies between the device display and the app display.
• A smartphone camera with 5 megapixels or higher is recommended for accurate QR code scanning.
• Network configuration may occasionally require re-attempts due to network situations or time-outs.
• The app system is subject to updates without prior notice for product function improvements.
• The actual network configuration process might differ slightly from the descriptions provided; the actual process on your device shall prevail.
• For more information, please check the service website.

Simplified EU Declaration of Conformity:

Trotec GmbH hereby declares that the radio equipment type (PAC 3910 X - Wifi module) complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://hub.trotec.com/?id=47570.

Trotec GmbH is not liable for any issues or problems caused by Internet connectivity, Wireless Routers, or Smart Devices. Please contact the original provider for further assistance.

Contact Information

Trotec GmbH

Grebbener Straße 7
52525 Heinsberg
Germany

Phone: +49 2452 962-0
Fax: +49 2452 962-200

Email: online@trotec.com

Website: www.trotec.com