Honeywell Xenon XP 1950h Healthcare 2D Barcode Scanner Quick Start Guide

Honeywell

Pre-preparation

Note: For information on cleaning the device, please refer to the User Guide.

Before connecting the scanner, turn off the computer. Turn the computer back on after the scanner is connected.

Power Device (If Included)

A diagram illustrates a power adapter being plugged into a wall outlet, with arrows indicating the connection. Another diagram shows the adapter plugged into the wall.

Note: If needed, the power supply must be purchased separately.

Connecting the Scanner

USB

A diagram shows the scanner connected to a computer via a USB cable.

Keyboard Wedge

A diagram shows the scanner connected to a computer via a keyboard wedge cable, which splits into a keyboard connection and a scanner connection.

RS232 Serial Port

A diagram shows the scanner connected to a computer via an RS232 serial cable, with a power adapter also connected.

Reading Method

The red laser beam emitted from the aiming window should be centered on the barcode, but the beam direction has no specific restrictions as long as the barcode can be read smoothly.

Product Defaults

Scanning the following barcode will restore all product default settings.

[Barcode: Product Defaults]

USB Interface

USB Serial

Scanning this barcode can set the scanner to simulate a standard RS232 COM port. If using a Microsoft® Windows® PC, download the driver from the Honeywell website (www.honeywellaidc.com). The driver will use the next available COM port number. Apple® Macintosh computers will recognize the scanner as a USB CDC class device and use the class driver automatically.

[Barcode: USB Serial]

Note: No additional settings (e.g., baud rate) are required.

USB PC Keyboard

Scan the following barcode to set the scanner to USB PC Keyboard mode.

[Barcode: USB PC Keyboard]

Application Integration

Epic

Scan the following barcode to set your device to communicate with the Epic software application.

[QR Code: EMR Application]

Meditech®

Scan the following barcode to set your device to communicate with the Meditech software application.

[QR Code: Meditech Application]

Silent Operation

Scan the following barcode to set the scanner to Silent Mode, to avoid disturbing patients who are resting.

Silent Mode (LED Indicator Blinks)

Scan the following barcode to set the scanner to Full Silent Mode. After scanning the barcode, the LED indicator and aimer will blink 5 times. A green blink indicates good scanning performance, while a red blink indicates poor scanning performance.

[QR Code: Silent Mode (LED Indicator Blinks)]

Silent Mode (LED Indicator Stays On)

Scan the following barcode to set the scanner to Full Silent Mode. After scanning the barcode, the LED indicator and aimer will remain lit for 1 second. A green blink indicates good scanning performance, while a red blink indicates poor scanning performance.

[QR Code: Silent Mode (LED Indicator Stays On)]

Buzzer Low Volume (Night Mode)

Scan the following barcode to set the scanner's buzzer volume to very low. After scanning the barcode, the scanner will emit a very soft beep.

[QR Code: Night Mode]

Buzzer Low Volume (Day Mode)

Scan the following barcode to set the scanner's volume to low. After scanning the barcode, the scanner will emit a lower beep.

[QR Code: Day Mode]

Trigger Modes

The following barcodes can set the scanner to the desired mode: "Manual Trigger - Normal" mode (requires pulling the trigger to read) or "Semi-Automatic Trigger" mode (scanner activates only when it senses a barcode).

[Barcode: Manual Trigger - Normal (Default)]

[Barcode: Semi-Automatic Trigger Mode]

Streaming Presentation™

When in "Streaming Presentation" mode, the scanner's aiming light remains on and continuously searches for barcodes.

[Barcode: Streaming Presentation]

Postamble

To add a carriage return character after the barcode, scan the "Add Carriage Return Postamble" barcode. To add a tab character after the barcode, scan the "Add Tab Character Postamble" barcode. Otherwise, scan the "Remove Postamble" barcode to remove the postamble.

[Barcode: Add CR Postamble]

[Barcode: Add Tab Character Postamble]

[Barcode: Remove Postamble]

Add Prefix to All Symbols

To add a Code ID prefix to all symbols at once, scan the following barcode.

[Barcode: Add Code ID Prefix to All Symbols (Temporary)]

Note: For a complete list of Code IDs, please refer to the Product User Guide.

Keyboard Country/Region

Scan the appropriate country/region barcode below to set the keyboard layout for your country/region or language. By default, the following characters are used for country-specific character replacement: #$@[₩]^′{|}~ Please refer to the "ISO 646 Character Replacement Table" in the User Guide to see the replacement characters for each country/region.

[Barcode: United States (Default)]

[Barcode: Belgium]

[Barcode: France]

[Barcode: Finland]

[Barcode: United Kingdom]

[Barcode: Germany / Austria]

[Barcode: Italy]

[Barcode: Switzerland]

[Barcode: Spain]

Note: For a complete list of country/region codes, please refer to the Product User Guide.

EZConfig-Scanning

To use other functions of the scanner, use the online configuration tool provided on our company website, EZConfig-Scanning.

Support

To search the knowledge base for solutions or log in to the technical support portal to report issues, visit www.hsmcontactsupport.com.

Product Documentation

Visit www.honeywellaidc.com to obtain product documentation.

Limited Warranty

Go to www.honeywellaidc.com, then click on Get Resources > Product Warranty to learn about warranty information.

Patents

For patent information, please see www.hsmpats.com.

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the selection and use of software and/or hardware to achieve intended results.

This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII.

	Honeywell Voyager XP 1470g Series Quick Start Guide - Barcode Scanner Setup Concise guide to setting up and connecting the Honeywell Voyager XP 1470g Series corded area-imaging barcode scanner, including connection types, reading techniques, and basic configuration.
	Honeywell Voyager 1250g Quick Start Guide Concise guide for setting up and configuring the Honeywell Voyager 1250g single-line laser scanner, including connection methods, reading techniques, and programming options.
	Honeywell CM4680 2D Imager Module: Quick Start Guide Get started quickly with the Honeywell CM4680 2D Imager Module. This guide covers essential setup, connection steps, configuration options, technical specifications, and mounting details for the CM4680 imager.
	MS7120 Orbit Presentation Laser Scanner Installation and User's Guide This guide provides comprehensive instructions for the installation and use of the Honeywell MS7120 Orbit Presentation Laser Scanner. It covers product features, components, installation procedures for various interfaces (RS232, RS485, Keyboard Wedge, USB), scanner operation, troubleshooting, and technical specifications.
	Honeywell Voyager XP 1470g Series Corded Area-Imaging Scanner Quick Start Guide A quick start guide for the Honeywell Voyager XP 1470g Series Corded Area-Imaging Scanner, covering setup, connection, reading techniques, and configuration.
	Honeywell Xenon 1900/1910 Quick Start Guide A quick start guide for the Honeywell Xenon 1900/1910 corded area-imaging scanner, covering setup, connection, reading techniques, and configuration options.
	Honeywell CM4680 2D Imager Module Quick Start Guide A quick start guide for the Honeywell CM4680 2D Imager Module, covering setup, configuration, and technical specifications.
	Honeywell HH400 Handheld Scanner Quick Start Guide Quick start guide for the Honeywell HH400 handheld 2D area-imaging scanner, covering setup, interface programming, reading techniques, and product specifications.