Appliance Installation Dimensions and Clearances
General Installation Requirements
This document outlines the essential dimensions and clearances required for the installation of built-in appliances. Proper adherence to these specifications ensures correct fitting and optimal performance.
Appliance Dimensions and Clearances
Vertical Appliance Installation View
This diagram illustrates a vertical appliance installation. Key dimensions include:
- Minimum overall height clearance: 590 mm
- Minimum width clearance: 530 mm
- Minimum depth clearance: 560 mm
- Required ventilation area: 200 cm²
Appliance Frontal/Side View
This diagram depicts a perspective view of an appliance, showing its front panel and dimensions. Key measurements are:
- Width: 545 mm
- Depth: 595 mm
- Front panel projection/overlap: 19.5 mm
Appliance Top/Side Installation View
This diagram details the installation space from the top or side, highlighting critical clearances and features:
- Overall appliance height: 585 mm
- Overall appliance depth: 595 mm
- Clearance from front edge: 19.5 mm
- Clearance for door swing/handle: 49 mm
- Top clearance: 5 mm
- Bottom clearance: 5 mm
- Adjustment range for feet: +0 to +3 mm
- Note: Adjustable feet for alignment are provided.
Cabinet/Niche Dimensions
This diagram specifies the required dimensions for the cabinet or niche where the appliance will be installed:
- Minimum cabinet width: 560 mm
- Minimum cabinet depth: 550 mm
- Minimum niche height: 590 mm