Installation Guide: Built-in Appliance Door Mounting
Important Clearances and Dimensions
Proper installation requires adherence to specific clearances and dimensions to ensure optimal performance and ventilation.
- Ventilation: Minimum required ventilation area is 200 cm².
- Clearance: Maintain a minimum clearance of 40 mm from the rear wall.
- Appliance Height: Maximum appliance height is 2100 mm.
- Cabinet Dimensions:
- Recommended cabinet width: 560-570 mm.
- Appliance width: Approximately 540 mm (Model A) or 545 mm (Model A).
- Hinge clearance: Allow 60 mm for hinge operation.
- Backwall: A wooden backwall is recommended for stability.
| Model | Height Range (mm) |
|---|---|
| A | 1770 |
| B | 1770 - 1778 |
Required Parts and Tools
The following components and tools are necessary for the installation process:
- Hinges: Parts 1a (1x), 1b (1x)
- Clips: Part 2 (2x)
- Cabinet Mounting Plates: Part 3 (4x)
- Appliance Brackets: Part 4 (4x)
- Sliding Mechanism Components: Parts 5 (4x), 6 (4x), 7 (4x), 8 (4x)
- Screws: For mounting plates (12x), for brackets (17x)
- Tool: Screwdriver (pH2)
Installation Procedure
Step 1-4: Prepare Cabinet and Appliance
Attach the cabinet mounting plates (Part 3) to the sides of the cabinet using 12 screws. Subsequently, attach the appliance brackets (Part 4) to the appliance frame using 17 screws.
Step 5-8: Attach Appliance Door
Mount the appliance door onto the appliance frame using the hinges (Parts 1a, 1b). Ensure the hinges lock into place with an audible [click].
Step 9-10: Connect Appliance Door to Cabinet Door
Utilize the sliding mechanism components (Parts 4, 5, 6, 7, 8) to connect the appliance door to the cabinet door. This involves sliding and securing these parts to enable the appliance door to move in conjunction with the cabinet door.
Detailed Door Connection and Adjustment
The following detailed views and steps further clarify the door connection process:
- View A1: Provides a close-up illustration of how the hinges are attached to the appliance frame.
- View A2: Shows a detailed diagram of the sliding rail system used for connecting the appliance door to the cabinet door.
- Steps B, C, D, E: These sequential diagrams guide the user through positioning the appliance within the cabinet, aligning the sliding rails, and completing the door connection and any necessary adjustments.
Final Checks and Safety
After installation, confirm that all connections are secure and that the appliance doors operate smoothly. Double-check that all specified clearances and ventilation requirements are met. ⚠️ Always prioritize safety during the installation process.
