HAPPRUN H1 Portable Projector
Instruction Manual
Important Safety Considerations
Attentions:
Thank you for purchasing this series of video projectors. Please read through this User's manual for proper use of this product.
Friendly Reminder:
- Do not look directly into the lens while the projector is running, as strong light may damage your eyes.
- Do not block the air outlet to prevent the projector from cooling down because internal electronics are damaged.
- Keep the projector and accessories out of the reach of children.
- Please make sure that the working environment of the projector is dry and ventilated.
- To prevent electric shock, please keep the projector out of the rain and away from moisture. It is recommended to switch off the projector after it has run for 6 hours non-stop.
- Do not press hard on the projector, as it may damage the product.
- Do not throw, hit, or shake the projector to avoid damaging the circuit board.
- Any questions after receiving the projector, please contact us, we will quickly and correctly solve your problem within 24 hours and give you a satisfactory answer.
Package Contents
- AV cable * 1
- HDMI cable * 1
- Power cord * 1
- Remote control * 1
- Projector screen * 1
- User Manual * 1
Projector Description
The projector features various ports and controls on its exterior. The front view shows the lens and an IR receiver. The side view highlights the cooling window. The rear view displays the power jack. The top panel includes controls for focusing, keystone correction, power, source selection, navigation (arrow keys), return, menu, and OK. The bottom panel has a label, hanger fixing screw holes, a stand hole (1/4 inch), adjustable feet, and a dust-proof net.
Ports and Controls:
- Front/Side: 1. IR Receiver, 2. Lens, 3. IR Receiver, 4. USB2 Port, 5. AV Port, 6. USB Port, 7. Headphone Jack, 8. HDMI Port, 9. Cooling Window, 10. Power Jack.
- Top Panel: 1. Focusing, 2. Keystone Correction, 3. Power Key [power-symbol], 4. Source Key, 5. Arrow Keys [up-arrow][down-arrow][left-arrow][right-arrow], 6. Return Key [return-symbol], 7. Menu Key [menu-symbol], 8. OK Key [ok-symbol].
- Bottom Panel: 9. Bottom Label (for dust cover access), 10. Hanger Fixing Screw Holes, 11. Hole for Stand (1/4 inch), 12. Height Adjustment Machine Feet, 13. Dust-Proof Net.
Remote Control Button Function
The remote control provides access to all projector functions.
- 1. Power [power-symbol]
- 2. Aspect Ratio
- 3. Arrow Keys [up-arrow][down-arrow][left-arrow][right-arrow]
- 4. Home [home-symbol]
- 5. Menu [menu-symbol]
- 6. Volume Down [volume-down-symbol]
- 7. Menu (Note: This appears to be a duplicate label in the original document)
- 8. Screen Flip
- 9. Source
- 10. Enter [enter-symbol]
- 11. Return [return-symbol]
- 12. Volume Up [volume-up-symbol]
- 13. Mute [mute-symbol]
Specifications
| Model | Multimedia Projector |
|---|---|
| Lamp | LED |
| Image System | LCD |
| Language | English, total 25Languages |
| Resolution | 1920×1080p |
| Input Voltage | 220V~50Hz 1A |
| Weight | 1.57 KG |
| Working Temp | 0-35°C |
| Input Port | HDMI / USB / AV |
| Output Port | Headphone |
| Aspect Ratio | 16:9 / 4:3 |
| Size | 240×210×96mm |
| Operation Mode | Manual / Remote Control |
Multimedia Supported Formats
| Category | Formats |
|---|---|
| Image Format | JPG / PNG / BMP / JPEG |
| Video Format | MP4 / MKV / WMV / RMVB / RM / AVI / FLV / TRP / VOB / 3GP / DIVX / TP / TS / MPG / M2TS / F4V / DAT |
| Audio Format | MP3 / AAC / WAV / FLAC / WMA / M4A |
Operation
Power/Focus/Keystone Correction
Power:
- Plug the power cord into a power outlet.
- Press the Power button [power-symbol] on the projector or on the remote control.
Focus:
Let the projector be perpendicular to the wall, use the Focusing button to make the picture clear. When focusing, you can broadcast programs to help you finish focus.
Keystone Correction:
If the projector is placed at an angle, the projection may appear trapezoidal. Use the keystone correction feature to adjust it correctly.
Connection
The projector can connect to various devices via HDMI, USB, or AV ports.
Laptop Output Keys:
| Brand | Output Key Combination |
|---|---|
| Lenovo | Fn+F3 |
| Dell | Fn+F8 |
| HP | Fn+F4 |
| ThinkPad | Fn+F7 |
| Asus | Fn+F8 |
| Acer | Fn+F5 |
| Samsung | Fn+F4 |
| Sony | Fn+F7 |
| Fujitsu | Fn+F10 |
| Haier | Fn+F3 |
| NEC | Fn+F3 |
| Panasonic | Fn+F3 |
| Sharp | Fn+F5 |
| Hitachi | Fn+F7 |
| TOSHIBA | Fn+F5 |
For Windows 7 or later, you can press the Windows key + P, then select “copy” to connect. If this method is invalid, please update your computer's graphics driver.
Connect the Smartphones
Note: When connecting to a smartphone, a compatible HDMI conversion cable (for smartphones) must be purchased separately. Using the wrong cable may prevent normal screen projection. Please contact support for any questions.
When connecting to iPhone / iPad:
- You need an extra Lightning to HDMI adapter to connect your iOS device to the projector (HDMI adapter not included).
- 1. Plug the HDMI plug of the HDMI conversion cable into the "HDMI" port of the projector.
- 2. Insert the USB plug of the HDMI conversion cable into the USB port of the projector.
- 3. Plug the Lightning terminal into your iPhone / iPad.
- 4. Select "HDMI" on the screen using the arrow keys on the remote control or projector.
- 5. Select "Trust" on the iPhone / iPad screen and enter the passcode. The iPhone / iPad screen will then be displayed.
When connecting to an Android smartphone:
- You need to buy a Micro USB/Type C to HDMI adapter to connect your Android devices (HDMI adapter not included).
- 1. Plug the HDMI plug of the HDMI conversion cable into the "HDMI" port of the projector.
- 2. Insert the USB plug of the HDMI conversion cable into the USB port of the projector.
- 3. Insert the Lightning terminal / Type-C terminal into your smartphone.
- 4. Select "HDMI" on the screen using the arrow keys on the remote control or projector. The smartphone screen will then be displayed.
Please note: The method of connecting a fire stick is the same.
Connecting Other Devices
1. Connect a USB drive:
- When connecting a USB drive, you can directly select the file you want to play from the main menu without needing to select the USB signal source.
- To play a video, select "Movie" on the main menu and press "OK".
- To play a picture, music, or text, select "Photo", "Music", or "Text" on the main menu and press "OK".
2. Connect AV video devices:
- Use the included 3-in-1 video cable to connect with AV devices.
- Choose the media signal channel: "AV".
3. Connect 3.5mm audio devices:
Supports 3.5mm earphones and other cable sound devices.
Bluetooth Settings
The Bluetooth function is compatible with audio output devices such as soundbars and Bluetooth speakers.
- Click "Bluetooth".
- Set Bluetooth on/off using the navigation keys [left-arrow] / [right-arrow] on the projector or remote control.
- Search for Bluetooth on the audio output device.
- Connect the Bluetooth of the audio output device.
- The Bluetooth connection is complete.
More Tips about Streaming Services
This projector works with YouTube, Chrome, Safari, and FaceTime when connected directly to a smartphone. However, it does not support playing protected video via APP when connected directly to a smartphone (e.g., Netflix, Prime Video, Hulu) due to encryption protocols. You can try playing protected video via a browser when connected to your iPhone.
It works with Netflix, Amazon Prime Video, and other copyright videos when connecting this projector to a laptop, fire TV stick, Roku, or Chrome cast. This is because the HDMI interface encryption protocol includes Netflix's.
Note on Dolby Sound: This projector does not support Dolby sound. If you play Dolby sound videos (e.g., from Amazon Fire Stick, Netflix, Blu-ray movies), there will be no sound. In this case, please turn off the Dolby sound on your source device or apps. The instructions for turning off Dolby sound are typically found under Settings > Display & Sounds > Audio > Dolby Digital Output > turn Dolby Digital (OFF).
Projector Settings
Access projector settings via the Menu button.
Image Settings
Zoom Settings:
1. Click "Menu" on the projector or remote control to access the setting menu.
2. Click "Zoom" and set the zoom level using the left/right arrow keys [left-arrow] / [right-arrow] on the projector or remote control.
Color Temperature Setting:
The "medium", "warm", and "cold" temperature modes are available for different color preferences.
Noise Reduction Settings:
Set the screen noise reduction effect to medium, high, off, or low.
Audio Settings
Adjust audio settings such as Audio Mode, Treble, and Bass.
General Settings
Language Settings:
The system supports 23 languages; the initial setting is English. Use the navigation keys [up-arrow]/[down-arrow]/[left-arrow]/[right-arrow] on the projector or remote control to search for and select the desired language.
Projection Mode Settings:
Adjust the image orientation (e.g., upside down) by clicking the "OK" key.
Reset to Default Settings:
To restore factory settings, please choose "Reset to Default", click "OK", and confirm.
