Welcome to the Chubory A68 Quick Start Guide!
Follow these steps to get your drone ready for flight.
Getting Started:
- Download the CHUBORY FUN App. ?
- Watch the tutorial video. ▶️
- View the instruction for use. ?
Diagram of the Drone
Drone Components:
- 1. Propeller A
- 2. Propeller B
- 3. Arm
- 4. Wifi Camera
- 5. Upper Casing
- 6. Propeller B
- 7. Propeller A
- 8. Brushless Motor
- 9. Optical Flow Lens
- 10. Power Switch
- 11. Drone Battery
- 12. Indicator Light
(Diagram showing the drone with numbered parts)
Diagram of the Transmitter
Transmitter Components:
- 1. Mobile phone clip
- 2. Indicator
- 3. One-key ascend
- 4. Left joystick
- 5. One-key landing
- 6. Power switch
- 7. Camera upward
- 8. Right joystick
- 9. Camera downward
- 10. Fine-tuning key
- 11. Press 3 seconds to stop
- 12. High/Low speed
- 13. Headless mode
- 14. One-key flips&rolls
- 15. Calibration
(Diagram showing the transmitter with numbered parts)
1. Charging
Drone Battery Charging:
- Connect the battery to the charger.
- Status: Charging (red dot), Fully charged (grey dot).
(Illustration showing drone battery charging)
Note: Charging each battery with a 5V=2A charger takes approximately 4-6 hours.
Transmitter Battery Charging:
- Insert AA batteries into the transmitter.
(Illustration showing AA batteries being inserted into the transmitter)
2. Get the Drone Ready
- Attach propellers to the drone arms. ➡️
- Insert the charged drone battery into the drone. ?
- Ensure all components are securely in place. ✔️
(Illustrations showing propeller attachment and battery insertion)
3. Get the Transmitter Ready
- Ensure the transmitter is powered off.
- Unfold the mobile phone clip. ⬆️
- Place your mobile phone in the clip. ?
(Illustrations showing transmitter preparation and phone mounting)
4. Pairing
- Place the drone on a level ground and turn on its power.
- Turn on the remote control.
- Push the throttle joystick to the highest point, then push it back to the lowest point. The indicator light will change from flashing to steady, indicating successful signal connection. ?
(Illustrations showing drone and transmitter pairing process)
5. Calibrate the Gyro
Press the "One button calibration" button. When the drone's lights are on and then start flashing, press the button again. Calibration is complete when the drone is placed on a horizontal surface in a steady state. ⚙️
(Illustration showing the calibration process)
6. Connect to WiFi
- Open the CHUBORY FUN App on your mobile device.
- Select the "CHUBORY FUN XXX" network.
- Tap "Start" in the app.
(Illustrations showing app connection steps)
7. Take-off
Please fly the drone in an open outdoor area free of surrounding obstructions. ?
(Illustration showing drone taking off)
8. Flight Direction Control
The left joystick controls the drone's altitude and orientation. The right joystick manages its forward, backward, and lateral movements. ?️
- Altitude Control: Left joystick up/down.
- Directional Control: Left joystick left/right.
- Forward/Backward: Right joystick up/down.
- Lateral Movement: Right joystick left/right.
(Illustrations showing joystick controls for flight)
9. Headless Mode
In headless mode, the operator does not need to identify the direction of the drone's nose. Control the drone according to the orientation of the remote control. This mode is advisable when the drone flies far away and its orientation is difficult to determine, to help bring the drone back. ↩️
(Illustrations demonstrating headless mode operation)
10. Landing
To land the drone, gently push the throttle joystick down until the drone lands safely. ?
(Illustration showing drone landing)
chubory
