810010540/DB | C-144-LA-8W-M12BK/25D/B

CommScope Fiber Indoor/Outdoor Cable

Product Description

Fiber indoor/outdoor cable, Single Jacket/Single Armor, Low Smoke Zero Halogen (LSZH), 144 fiber, Singlemode G.652.D and G.657.A1, Gel-Free, Stranded Loose Tube, Black jacket color, Meter jacket marking, B2ca flame rating.

Corrugated steel tape armor provides strength and flexibility, offering additional crush and rodent protection. ?️

Product Classification

Regional Availability	Asia \| Australia/New Zealand \| EMEA \| Europe \| Latin America \| North America
Portfolio	CommScope®
Product Type	Fiber indoor/outdoor cable
Product Series	Z-LA

General Specifications

Armor Type	Corrugated steel
Cable Type	Stranded loose tube
Construction Type	Armored
Subunit Type	Gel-free
Jacket Color	Black
Jacket Marking	Feet
Subunit, quantity	12
Fibers per Subunit, quantity	12
Total Fiber Count	144

Dimensions

Buffer Tube/Subunit Diameter	2.5 mm \| 0.098 in
Diameter Over Jacket	18.6 mm \| 0.732 in

Representative Image

Diagram shows a cross-section of the fiber optic cable including: LSZH Outer Jacket, Steel Tape Armoring, Binder, Ripcord (2), Water Swellable Tape, Binder, 2.5mm Gel-Free Buffer Tubes, 250 micron Fibers, and Dielectric Strength Member.

Mechanical Specifications

Minimum Bend Radius, loaded	201 mm \| 7.913 in
Minimum Bend Radius, unloaded	134 mm \| 5.276 in
Tensile Load, long term, maximum	800 N \| 179.847 lbf
Tensile Load, short term, maximum	2700 N \| 606.984 lbf
Compression	44 N/mm² \| 251.246 lb/in²
Compression Test Method	FOTP-41 \| IEC 60794-1 E3
Flex	25 cycles
Flex Test Method	FOTP-104 \| IEC 60794-1 E6
Impact	3 N·m \| 26.552 in·lb
Impact Test Method	FOTP-25 \| IEC 60794-1 E4
Strain	See long and short term tensile loads
Strain Test Method	FOTP-33 \| IEC 60794-1 E1
Twist	10 cycles
Twist Test Method	FOTP-85 \| IEC 60794-1 E7
Vertical Rise, maximum	428 m \| 1,404.2 ft

Optical Specifications

Fiber Type	G.652.D and G.657.A1

Environmental Specifications

Installation temperature	-30 °C to +60 °C (-22 °F to +140 °F)
Operating Temperature	-40 °C to +70 °C (-40 °F to +158 °F)

Storage and Qualification

Storage Temperature	-40 °C to +75 °C (-40 °F to +167 °F)
Cable Qualification Standards	ANSI/ICEA S-104-696 \| EN 187105 \| Telcordia GR-20 \| Telcordia GR-409
EN50575 CPR Cable EuroClass Fire Performance	B2ca
EN50575 CPR Cable EuroClass Smoke Rating	s1b
EN50575 CPR Cable EuroClass Droplets Rating	d0
EN50575 CPR Cable EuroClass Acidity Rating	a1
Environmental Space	Aerial, lashed \| Buried \| Low Smoke Zero Halogen (LSZH)
Flame Test Listing	EN 50399 \| NEC OFC-ST1 (ETL) and c(ETL)
Flame Test Method	EN 50399 \| IEC 60332-3 \| IEC 60754-2 \| IEC 61034-2 \| IEEE 1202 \| UL 1685
Jacket UV Resistance	UV stabilized
Water Penetration	24 h
Water Penetration Test Method	FOTP-82 \| IEC 60794-1 F5

Environmental Test Specifications

Cable Freeze	-2 °C \| 28.4 °F
Cable Freeze Test Method	FOTP-98 \| IEC 60794-1 F15
Heat Age	-40 °C to +85 °C (-40 °F to +185 °F)
Heat Age Test Method	IEC 60794-1 F9
Low High Bend	-30 °C to +60 °C (-22 °F to +140 °F)
Low High Bend Test Method	FOTP-37 \| IEC 60794-1 E11
Temperature Cycle	-40 °C to +70 °C (-40 °F to +158 °F)
Temperature Cycle Test Method	FOTP-3 \| IEC 60794-1 F1

Packaging and Weights

Cable weight	360 kg/km \| 241.909 lb/kft

Included Products & Fiber Specifications

Product: CS-8W-200-EMEA | 8W-200um

Description: Low Macrobending, Zero Water Peak, Dispersion-Unshifted Singlemode Fiber

Fiber General Specifications

Cladding Diameter	125 µm
Cladding Diameter Tolerance	±0.7 µm
Cladding Non-Circularity, maximum	0.7 %
Coating Diameter (Colored)	200 µm
Coating Diameter (Uncolored)	190 µm
Coating Diameter Tolerance (Colored)	±10 µm
Coating Diameter Tolerance (Uncolored)	±10 µm
Coating/Cladding Concentricity Error, maximum	12 µm
Core/Clad Offset, maximum	0.5 µm
Proof Tensile Stress	100,000 psi (0.69 GPa)

Fiber Dimensions

Fiber Curl, minimum	4 m \| 13.123 ft

Fiber Mechanical Specifications

Macrobending, 20 mm Ø mandrel, 1 turn	0.75 dB @ 1,550 nm \| 1.50 dB @ 1,625 nm
Macrobending, 30 mm Ø mandrel, 10 turns	0.25 dB @ 1,550 nm \| 1.00 dB @ 1,625 nm
Macrobending, 50 mm Ø mandrel, 100 turns	0.05 dB @ 1,550 nm \| 0.05 dB @ 1,625 nm
Coating Strip Force, maximum	8.9 N \| 2.001 lbf
Coating Strip Force, minimum	1.3 N \| 0.292 lbf
Dynamic Fatigue Parameter, minimum	20

Fiber Optical Specifications

Cabled Cutoff Wavelength, maximum	1260 nm
Point Defects, maximum	0.05 dB
Zero Dispersion Slope, maximum	0.092 ps/[km-nm-nm]
Zero Dispersion Wavelength, maximum	1324 nm
Zero Dispersion Wavelength, minimum	1300 nm

Fiber Optical Specifications, Wavelength Specific

Attenuation, maximum	0.20 dB/km @ 1550 nm \| 0.23 dB/km @ 1,625 nm \| 0.344 dB/km @ 1310 nm \| 0.344 dB/km @ 1380 - 1385 nm
Dispersion, maximum	18 ps(nm·km) at 1550 nm \| 22 ps(nm·km) at 1625 nm \| 3.5 ps(nm·km) from 1285 nm to 1330 nm at 1310 nm
Index of Refraction	1.467 @ 1,310 nm \| 1.467 @ 1,385 nm \| 1.468 @ 1,550 nm
Mode Field Diameter	10.1 µm @ 1,550 nm \| 9.0 µm @ 1,310 nm
Mode Field Diameter Tolerance	±0.2 µm @ 1310 nm \| ±0.2 µm @ 1550 nm
Polarization Mode Dispersion Link Design Value, maximum	0.05 ps/√km
Standards Compliance	ITU-T G.652.D \| ITU-T G.657.A1

Fiber Environmental Specifications

Heat Aging, maximum	0.05 dB/km @ 85 °C
Temperature Dependence, maximum	0.05 dB/km
Temperature Humidity Cycling, maximum	0.05 dB/km
Water Immersion, maximum	0.05 dB/km @ 23 °C

Footnotes

Operating Temperature: Specification applicable to non-terminated bulk fiber cable.

Temperature Dependence, maximum: Temperature dependence is conducted at -60 °C to +85 °C (-76 °F to +185 °F).

Temperature Humidity Cycling, maximum: Temperature humidity cycling is conducted at -10 °C to +85 °C (+14 °F to +185 °F) up to 95% relative humidity.

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 5 Pages, 325.48KB

810010540-db-product-specifications-comprehensive COMMSCOPE

Related Documents

	CommScope 810010548/DB C-144-LA-8W-M12BK/25D/C Fiber Optic Cable Specifications Detailed technical specifications for the CommScope 810010548/DB C-144-LA-8W-M12BK/25D/C indoor/outdoor fiber optic cable, including product classification, general, mechanical, optical, and environmental properties, along with cable structure details.
	CommScope C-096-LA-8W-M12BK/25D/C Fiber Optic Cable Specifications Detailed technical specifications for the CommScope C-096-LA-8W-M12BK/25D/C indoor/outdoor fiber optic cable, including product classification, general, mechanical, optical, and environmental performance data, as well as qualification standards.
	CommScope 810010538/DB C-072-LA-8W-M12BK/25D/B: 72-Fiber Indoor/Outdoor LSZH Cable Specifications Detailed technical specifications for the CommScope 810010538/DB C-072-LA-8W-M12BK/25D/B fiber optic cable. This 72-fiber Singlemode cable features LSZH jacket, single armor, and B2ca flame rating, suitable for indoor/outdoor applications.
	CommScope C-048-LA-8W-M12BK/25D/B Fiber Optic Cable Specifications Detailed technical specifications for the CommScope C-048-LA-8W-M12BK/25D/B fiber optic cable, including mechanical, optical, and environmental properties.
	CommScope C-096-LA-8W-M12BK/25D/B Fiber Optic Cable Specifications Detailed technical specifications for the CommScope C-096-LA-8W-M12BK/25D/B fiber optic cable, including mechanical, optical, and environmental performance data, qualification standards, and included product details.
	CommScope C-006-LA-8W-M06BK/25D/B Fiber Optic Cable Specifications Detailed technical specifications for the CommScope C-006-LA-8W-M06BK/25D/B fiber optic cable, including mechanical, optical, and environmental properties, and compliance standards.
	CommScope 810010539/DB C-096-LA-8W-M12BK/25D/B: 96-Fiber Indoor/Outdoor LSZH Cable Detailed specifications for the CommScope 810010539/DB C-096-LA-8W-M12BK/25D/B, a 96-fiber indoor/outdoor LSZH cable with single jacket/armor, Singlemode G.652.D/G.657.A1 fibers, and B2ca flame rating. Includes mechanical, optical, and environmental test data.
	CommScope C-144-LA-8W-M12BK/25D/B: 144-Fiber Indoor/Outdoor Cable Specifications Detailed technical specifications for the CommScope C-144-LA-8W-M12BK/25D/B, a 144-fiber indoor/outdoor LSZH cable with single jacket/armor, G.652.D/G.657.A1 fiber, and B2ca flame rating.