HMS CM20 Leg Press

Safety Precautions

This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine.

In particular, note the following safety precautions:

Keep children and pets away from the machine at all times. DO NOT leave unattended children in the same room with the machine.
Only one person at a time should use the machine.
If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.
Position the machine on a clear, level surface. DO NOT use near water or outdoors.
Keep hands away from all moving parts.
Always wear appropriate workout clothing when exercising. Do not wear robes or other clothing that could become caught in the machine. Running or aerobic shoes are also required.
Use the machine only for its intended use as described in this manual. DO NOT use any other accessories not recommended by the manufacturer.
DO NOT place any sharp objects around the machine.
Handicapped or disabled persons should not use the machine without the presence of a qualified health professional or physician.
Before exercising, always do stretching first.
Never operate the machine if it is not functioning properly.
You can use the WRENCH and the INNER HEX WRENCH to complete the assembly.

WARNING: BEFORE BEGINNING THIS OR ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN FIRST. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING. WE ASSUME NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.

Part List

Key No.	Description	Qty.	Key No.	Description	Qty.
1	Right Frame	1	31	Comfort Grip	6
2	Left Frame	1	32	Spring Clip	2
3	Main Frame	1	33	Buffer Plate	2
4	Rear Frame	1	34	Plug (45*45)	1
5	Main Slide Frame	1	35	Plug (50*50)	8
6	Stiffening Frame	1	36	Plug (50*70)	1
7	Weight Plate Frame	1	37	Plug φ50	2
8	Rear Upright	1	38	Pin	1
9	Right Slide Support	1	39	Washer ø8	20
10	Left Slide Support	1	40	Washer ø10	17
11	Right Armrest Support	1	41	Washer ø12	36
12	Left Armrest Support	1	42	Big Washer ø10	4
13	Right Handle Frame	1	43	Nylon Lock Nut M8	8
14	Left Handle Frame	1	44	Nylon Lock Nut M10	5
15	Adjustment Frame	1	45	Nylon Lock Nut M12	18
16	Adjustment Tube	1	46	Hex Socket Flat Point Screws M8*10	2
17	Top Tube	1	47	Hex Socket Button Head Screws M8*30	4
18	Movable Leg Press Frame	1	48	Hex Socket Head Cup Screws M10*16	2
19	Leg Press Frame	1	49	Hex Bolt M8*20	13
20	Handle Fixing Rack	2	50	Hex Bolt M10*20	8
21	OP Tube	2	51	Hex Bolt M10*70	6
22	Backrest Pad	1	52	Hex Bolt M12*75	6
23	Shoulder Pad	2	53	Hex Bolt M12*80	2
24	Seat Pad	1	54	Hex Bolt M12*85	4
25	Bushing	4	55	Hex Bolt M12*100	2
26			56	Hex Bolt M12*125	2
27	Bearing 608	8	57	Hex Bolt M12*130	2
28	Small Roller Wheel	4	58	L-Plate	1
29	Big Roller Wheel	4	59	U-Buffer	2
30	Circlips for shaft	4	60

Assembly Instructions

Step 1

Key No.	Description	Qty.
1	Right Frame	1
2	Left Frame	1
3	Main Frame	1
4	Rear Frame	1
8	Rear Upright	1
42	Washer ø12	8
46	Nylon Lock Nut M12	4
54	Hex Bolt M12*80	2
56	Hex Bolt M12*100	2

Note: 1. Washer should be placed on both ends of all bolts (against the head of the bolt and against the nut) unless otherwise specified in these instructions. 2. Hand to tighten all bolts on initial assembly and finally tighten with the wrench once the entire structure is erect. 3. Some parts may be pre-assembled at the factory. 4. It's better to complete the assembly with the help of others.

Step 2

Key No.	Description	Qty.
1	Right Frame	1
2	Left Frame	1
9	Right Slide Support	1
10	Left Slide Support	1
42	Washer ø12	8
46	Nylon Lock Nut M12	4
53	Hex Bolt M12*75	4

Step 3

Key No.	Description	Qty.
1	Right Frame	1
2	Left Frame	1
9	Right Slide Support	1
10	Left Slide Support	1
42	Washer ø12	8
46	Nylon Lock Nut M12	4
53	Hex Bolt M12*75	4

Note: Tighten all nuts and bolts with the wrench. Check the Main Slide Frame (#5), to make sure it can be slide well.

Step 4

Key No.	Description	Qty.
5	Main Slide Frame	1
9	Right Slide Support	1
10	Left Slide Support	1
11	Right Armrest Support	1
12	Left Armrest Support	1
20	Handle Fixing Rack	2
40	Washer ø12	8
44	Nylon Lock Nut M8	4
50	Hex Bolt M8*20	4

Note: One position for releasing the part (#5). Another position for locking the part (#5).

Step 5

Key No.	Description	Qty.
5	Main Slide Frame	1
6	Stiffening Frame	1
7	Weight Plate Frame	1
21	OP Tube	2
33	Spring Clip	2
41	Washer ø10	7
42	Washer ø12	4
45	Nylon Lock Nut M10	3
46	Nylon Lock Nut M12	2
47	Hex Socket Flat Point Screws M8*10	2
52	Hex Bolt M10*70	4
53	Hex Bolt M12*75	2

Step 6

Key No.	Description	Qty.
5	Main Slide Frame	1
13	Right Handle Frame	1
14	Left Handle Frame	1
23	Shoulder Pad	2
40	Washer ø8	8
41	Washer ø10	6
43	Big Washer ø10	2
45	Nylon Lock Nut M10	2
50	Hex Bolt M8*20	8
51	Hex Bolt M10*20	4
52	Hex Bolt M10*70	2

Step 7

Key No.	Description	Qty.
5	Main Slide Frame	1
9	Right Slide Support	1
10	Left Slide Support	1
22	Backrest Pad	1
24	Seat Pad	1
41	Washer ø10	4
43	Big Washer ø10	2
49	Hex Socket Head Cup Screws M10*16	2
51	Hex Bolt M10*20	4
59	L-Plate	1

Step 8

Key No.	Description	Qty.
1	Right Frame	1
2	Left Frame	1
3	Main Frame	1
4	Rear Frame	1
15	Adjustment Frame	1
16	Adjustment Tube	1
18	Movable Leg Press Frame	1
19	Leg Press Frame	1
39	Pin	1
42	Washer ø8	8
46	Nylon Lock Nut M12	4
50	Hex Bolt M8*20	1
55	Hex Bolt M12*85	4

Warranty Information

Article name: [Article name not specified in PDF]

EAN code: [EAN code not specified in PDF]

Date of sale: [Date of sale not specified in PDF]

GUARANTEE TERMS:

The Seller provides guarantee on behalf of the Guarantor within the territory of the Republic of Poland for the period of 24 months from the date of sale: electric power assisted booster 24 months, charger 6 months.
The Guarantee will be recognised by the shop or service centre after the client provides:
- clearly and correctly filled-in guarantee card with the sale stamp and the seller's signature
- valid purchase confirmation for the equipment including the date of sale / bill, complained product.
Possible defects and damages revealed during the guarantee period shall be remedied free of charge within not more than 21 days from the delivery of the product to the shop or service.
Should it be necessary to import some components, the guarantee term can be extended by the period required to import such part, however such period shall not be longer than 90 days.
The guarantee does not cover:
- mechanical damages and subsequent defects,
- damages and defects resulting from incorrect storage and usage of the equipment against its purpose,
- incorrect assembly and maintenance,
- damages and consumption of such elements as: cables, straps, rubber parts, pedals, sponge grips, wheels, bearings, etc.
The guarantee expires in the event of:
- expiry of the validity term,
- self-repairs,
- failure to follow the rules of correct operation.
The product handed over for repair should be complete and clean. If some parts are missing, the service is entitled to refuse to accept the product for repair. The service may refuse to accept a dirty product or clean in on the client's expense after the client's written permit.
The guarantee does not cover activities related to assembly, maintenance, which, according to the instruction, the user is obliged to perform themselves.
The Guarantor also informs that they offer post-guarantee service.
The product should be provided in its original packaging and should be secured for shipment.
To exercise the guarantee follow the procedure posted on the website: https://serwis.abisal.pl/

In case of non-conformity of the sold thing with the contract, the buyer is entitled by law to legal remedies from and at the expense of the seller. The guarantee does not affect such remedies.

THE EQUIPMENT IS NOT INTENDED FOR REHABILITATION AND THERAPY

	HMS STR40 Weight Training Equipment Manual This document provides assembly instructions, safety information, and warranty details for the HMS STR40 weight training equipment. It includes a parts list with descriptions and quantities in multiple languages.
	HMS STR44 Fitness Rack: User Manual, Safety Guidelines, and Warranty Comprehensive guide for the HMS STR44 fitness rack, including parts list, essential safety instructions, and warranty terms. Learn how to safely use and maintain your HMS STR44 equipment.
	HMS Mini Stepper S3033 User Manual and Safety Instructions Comprehensive user manual for the HMS Mini Stepper S3033, including safety precautions, assembly instructions, operation procedures, and exercise guides. Learn how to use the stepper for effective home workouts.
	HMS STR45 Barbell Holder - Assembly and Safety Instructions Comprehensive guide for assembling and safely using the HMS STR45 barbell holder. Includes installation instructions, safety precautions, maintenance guidelines, and warranty information.
	HMS STR46 Barbell Holder Assembly and Safety Instructions Comprehensive guide for assembling and safely using the HMS STR46 barbell holder. Includes installation steps, safety precautions, maintenance guidelines, and warranty information.
	HMS STR38 Dumbbell Rack - Product Information and Safety Guide Detailed product information, parts list, and safety instructions for the HMS STR38 dumbbell rack. Learn about assembly, usage, and warranty terms provided by HMS.
	HMS MP6548 Air Bike User Manual and Assembly Guide Comprehensive user manual and assembly guide for the HMS MP6548 air bike, detailing features, operations, safety precautions, and parts list for home fitness enthusiasts.
	HMS BE5838 Treadmill User Manual This user manual provides comprehensive instructions for the HMS BE5838 treadmill, covering safety guidelines, installation, operation, maintenance, and troubleshooting for optimal fitness experience.