Package Contents
- 1 x iClever BTH13 Wireless Headphones
- 1 x User Manual
- 1 x 3.5mm Audio Cable
- 1 x USB Type-C Cable
Product Diagram
The headphones feature several buttons and ports:
On the Right Earcup:
- Light On / Off Button: Controls the LED lights.
- Volume + / Next Track Button: Increases volume or skips to the next track.
- MFB Button (Multi-Function Button): Used for play/pause, answering/ending calls, rejecting calls, and activating Siri.
- Volume - / Previous Track Button: Decreases volume or goes to the previous track.
- Power Button: Turns the headphones on or off.
On the Bottom of the Right Earcup:
- LED Indicator: Shows charging status and pairing mode.
- Type-C Charging Port: For charging the headphones.
- 3.5mm Audio Input: For wired audio connection.
- Microphone: For calls.
On / Off
Power On: Switch the power button to the "ON" direction. The LED indicator flashes blue for 1 second, and colorful lights turn on.
Shutdown: Switch the power button to the "OFF" direction. The headphone turns off. The LED indicator flashes blue for 1 second and then goes off.
Bluetooth Pairing
Pairing Process:
- In the power-on state, switch the power button to the "ON" direction. The colorful lights turn on, and Bluetooth enters the pairing state, indicated by red and blue lights flashing alternately.
- Turn on the Bluetooth of your mobile phone. Find and select "iClever-BTH13" from the device list for Bluetooth pairing connection.
Light On / Off
Short press the "Light On / Off" button to turn the lights on or off.
Volume Limit Gear Switching
Press and hold the "+" and "-" buttons simultaneously to switch the volume limit:
- 74dB limit and voice broadcast "74dB".
- 85dB limit and voice broadcast "85dB".
- 94dB limit and voice broadcast "94dB".
Operation of Buttons
| Action | Button/Method |
|---|---|
| Volume Up | Short press the "+" button. |
| Volume Down | Short press the "-" button. |
| Next Track | Press and hold the "+" button for 2 seconds. |
| Previous Track | Press and hold the "-" button for 2 seconds. |
| Play / Pause | Press the MFB button once. |
| Answer / End A Call | Press the MFB button once. |
| Reject A Call | Keep pressing the MFB button for a few seconds. |
| Activate Siri | Press the MFB button twice. |
| Clear The Pairing List | Press and hold the "+" and "-" buttons simultaneously for 4 seconds in the power-on state to clear the pairing list. The headphone will then automatically enter pairing state. |
Voice Prompt
| Status | Voice Prompt |
|---|---|
| Power On | Power on |
| Power Off | Power off |
| Pairing | Pairing |
| Successful Pairing | Connected |
| Disconnection | Disconnected |
| Low Power | Battery Low |
How to Charge the Headphone
Connect the Type-C cable to the Type-C port on the headphone and a 5V power outlet (power adapter is not included). The indicator light will glow red to indicate charging. When the headphone is fully charged, the indicator light will change from red to blue.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Find more about Declaration of Conformity, please click the below link to download: http://files.iclever.com/BTH13-DOC-EN.pdf
For more information about the Declaration of Conformity, please click the following link: http://files.iclever.com/BTH13-DOC-DE.pdf
