Mitsubishi PAR-41MAAU Deluxe MA Remote Controller

Operation and Display Features

Full View and Basic View

The remote controller offers two display modes: "Full View" and "Basic View".

Full View Example: Displays current room temperature (e.g., 72.0°F), set temperature (e.g., 78.0°F), fan speed, and operation mode (e.g., Cool, Auto). Buttons include MENU, RETURN, SELECT, HOLD, ON/OFF.

Basic View Example: Displays current mode (e.g., Cool), set temperature (e.g., 84°F), and fan speed. Buttons include MENU, RETURN, SELECT, HOLD, ON/OFF.

Key Operational Functions

• ON/OFF: Switches the unit between ON and OFF states.
• Operation Mode Switching: Cycles through Cool, Dry, Fan, Auto, Setback, and Heat modes.
• Hold: Enables or disables the Hold function. When enabled, ON/OFF timer, Schedule (Weekly timer), Auto return, and Auto-OFF timer functions are prohibited.
• Temperature Setting: Adjusts the desired temperature. The settable range varies by indoor unit model.
• Fan Speed Setting: Changes the fan speed. Available speeds vary by model.
• Air Flow Direction Setting: Adjusts the airflow direction. Available directions vary by model.
• Louver Setting: Switches the louver between ON and OFF states.
• Ventilation Equipment Control: Allows interlocked setting and operation with City Multi Lossnay units. Controls Stop/Low/High settings for ventilation equipment.
• Main Display Mode Setting: Selects between "Full" and "Basic" display modes.
• B&W Inversion: Inverts display colors, switching from a white background with black characters to a black background with white characters.

New Features (M- & P-Series)

• View Energy Consumption Data:
  • Hourly: Displays hourly energy consumption for the last 31 days.
  • Daily/Monthly: Displays daily or monthly energy consumption for the last 14 months.
• MASS Save Function: Allows selection of outdoor air temperatures for enabling/disabling outdoor unit operation (enable on rise, disable on fall) and backup heater operation (enable on fall, disable on rise).

System and Clock Features

• Clock: Allows setting of date (year/month/day) and time (hour/minute). The set time and day of the week can be displayed on the main display, or the time display can be turned off. Supports 12-hour (AM/PM) and 24-hour formats.
• Daylight Saving Time: Enables setting of start and end times for daylight saving time activation.
• Room Temp. Display: Option to enable or disable the display of the room temperature.
• Error Information: Displays error codes and unit addresses when an error occurs. Allows configuration to show air-conditioning unit model, serial number, and contact number upon error.
• Filter Information: Displays a filter sign when it is time to clean the filter.
• Remote Controller Information: Allows checking the version of the remote controller.

Note: Features marked with *1 are active only for supported units. The clock is accurate within 45 seconds per month at 77°F (25°C) and is backed up for 3 days.

Schedule and Timer Settings

• Timer:
  • ON/OFF Timer: Turns the unit ON and OFF daily at a set time, with 5-minute increments. Can be set for ON time only or OFF time only.
  • Auto-OFF Timer: Turns the unit off after a specified operation period, settable from 30 to 240 minutes in 10-minute increments.
• Weekly Timer: Allows setting weekly ON/OFF times and temperatures. Time can be set in 5-minute increments, with up to 8 schedule patterns per day. Not valid when the ON/OFF timer is set.

Restriction Settings

• Allows/Disallows Local Operation: Prohibits specific operations (ON/OFF, mode, set temp., filter reset, air direction, fan speed, timer) via a centralized controller. A prohibited operation icon appears on the main display (Full mode) when active.
• Operation Lock: Prohibits operations such as Sensing Location, ON/OFF, Mode, Set temp., Menu, Fan, Louver, Vane, or Hold.
• Temperature Range Restriction: Limits the room temperature range for each operation mode.
• Auto Return: Units operate at a preset temperature after a designated period. Time can be set from 30 to 120 minutes in 10-minute increments. Not valid when temperature setting range is restricted.
• Password: Allows setting of an Administrator password (for schedule settings) and a Maintenance password (for test run, function settings).

Miscellaneous Items

• Language Selection: Supports English, French, and Spanish display languages.
• Brightness Contrast: Allows adjustment of LCD brightness and contrast.
• Manual Vane Angle: Fixes the vane position for each air outlet.
• Service: Accesses functions like Test run, Function setting, Request code, and Error history.
• 3D i-see Sensor®: Enables settings for the 3D i-see Sensor®.

Energy Saving Options

• No Occupancy Energy Save: Requires 3D i-see Sensor® on applicable indoor units.
• Room Occupancy Energy Save: Requires 3D i-see Sensor® on applicable indoor units.
• No Occupancy Auto-OFF: Requires 3D i-see Sensor® on applicable indoor units.
• Setback Mode: (Details not specified in this section, but implies temperature setbacks).

System Example

Illustrates a system configuration where a PAR-41MAAU is connected to a group. The diagram shows two "Deluxe MA remote controller" units connected via "Non-polarized 2-wire" cables. It notes that when a PAR-41MAAU is connected to a group, no other MA remote controllers can be connected to the same group.

Dimensions

Views and Measurements

Front View: 120 mm [4-23/32 in.] width and 120 mm [4-23/32 in.] height.

Side View: 14.5 mm [37/64 in.] depth.

Rear View: Shows connection points and mounting details.

Compatibility Chart

Note: MAC-334IF-E indicates that the unit requires a MAC-334IF-E Adapter to use the PAR-41MAAU.

Specifications