Minelab Vanquish 340 Metal Detector

Assembly

The Vanquish 340 metal detector is designed for easy assembly. Follow these steps:

1. Connect the lower shaft to the control box.
2. Attach the coil to the lower shaft.
3. Connect the coil cable to the control box.
4. Attach the control box to the upper shaft.
5. Adjust the shaft length for comfortable use.

Refer to the diagrams for visual guidance on assembly steps 1 through 7.

Quick Start

1. Turn On: Press the power button.
2. Wait: Allow the detector to initialize for 5 seconds.
3. Go Detecting: Start your search.

Search Modes

The Vanquish 340 offers three distinct search modes:

• Coin: Ideal for finding coins from around the world while ignoring trash in parks and at the beach.
• Jewellery: Designed to help you recover precious jewellery, regardless of where it was lost.
• All Metal: Detects all types of metal objects, including iron.

Controls and Display

Familiarize yourself with the control panel and display:

Controls:

1. Power ON/OFF
2. Volume Adjust
3. Sensitivity Adjust
4. Search Mode
5. Target Identification Guide

Display:

• Battery Level ?
• Volume Level ?
• Sensitivity Level
• Target Identification Number
• Depth Gauge ?
• Search Modes ⚙️
• Discrimination Segments