QUICK REFERENCE GUIDE

HI98330 Nutrient Tester EC/TDS

Brand: Hanna Instruments

Introduction

Dear Customer,

Thank you for choosing Hanna Instruments. For more information about Hanna Instruments and our products, visit www.hannainst.com or e-mail us at sales@hannainst.com. For technical support, contact your local Hanna Instruments office or e-mail us at tech@hannainst.com.

Please scan the QR code or use the link below to download the user manual: https://manuals.hannainst.com/HI98330

Package Contents

HI98330
Quick reference guide & instrument quality certificate

Note: Save all packing material. Any damaged or defective item must be returned in its original packing material with the supplied accessories.

Main Features

IP67 waterproof and floating design
Rugged and doubles as a stirring stick
No user calibration needed
Battery level warning

Operational Guidelines

Tester removed from packing

Rotate the battery cap counter clockwise to remove the protective film.
Tightly screw battery cap back on.

[Diagram: Shows rotating the battery cap counter-clockwise to remove it, and then screwing it back on tightly.]

Tester placed in water

LEDs light up from one end to the other and back, and display battery status:

EC (mS/cm)	TDS (ppm)	Status
6.0	3000-4200	100% battery

When the tester is placed in water, observe the following:

EC (mS/cm)	TDS (ppm)	Status
3.2	1600-2240	reading not stable
3.2	1600-2240	reading stable
3.2	1600-2240	read value 3.3 mS/cm
3.4	1700-2380	[Reading value]
0.2	100-140	reading under range
6.0	3000-4200	reading over range

LEDs light up from one end to the other and back, and display battery level warning:

[Low Battery Indicator]

replace batteries

[Diagram: Shows a low battery indicator, possibly a bar graph, signaling the need to replace batteries.]

EC Sensor Cleaning

Remove the crown-shaped cap and rinse the probe under a stream of tap water.
Shake excess water off.
Leave the tester to dry out.

Company Commitment and Warranty

Hanna Instruments is committed to developing and deploying digital solutions with a positive impact on the environment and climate.

All Hanna instruments conform to the CE European Directives and UK standards [CE marking], [UKCA marking], and our production facilities are ISO 9001 certified [ISO 9001 certified]. HI98330 is warranted for a period of six years against defects in workmanship and materials when used for its intended purpose and maintained according to instructions.

Please retain for future use.

	HI991300 / HI991301 Waterproof pH, EC, TDS & Temperature Meter - Instruction Manual This instruction manual provides detailed information on the Hanna Instruments HI991300 and HI991301 waterproof pH, EC, TDS, and temperature meters. It covers preliminary examination, general description, main features, specifications, display description, operational guide, meter setup, battery replacement, accessories, electrode maintenance, certification, recommendations, and warranty.
	Hanna HI3512 Dual Input Benchtop Meter Quick Reference Guide Quick reference guide for the Hanna HI3512 Dual Input Calibration Check pH, ORP, ISE, EC, Resistivity, TDS, NaCl Benchtop Meter, covering features, package contents, and operational overview.
	Hanna Instruments HI98197 Waterproof Portable EC Meter for Ultrapure Water The Hanna Instruments HI98197 is a professional, waterproof, portable EC (conductivity) meter designed for ultrapure water applications. It features a high-resolution display, multi-point calibration, automatic temperature compensation, and data logging capabilities. The meter is IP67 rated and includes a four-ring platinum probe for accurate measurements across a wide range.
	Hanna Instruments HI9812-51 Portable pH, EC, TDS, Temperature Meter Instruction Manual User manual for the Hanna Instruments HI9812-51 portable meter, detailing its features, specifications, calibration, measurement, and maintenance for pH, EC, TDS, and temperature.
	Hanna HI5522 Research Grade Meter: pH, ORP, ISE, EC, TDS, Salinity, Resistivity, and Temperature Detailed overview of the Hanna HI5522 research-grade benchtop meter, highlighting its advanced features for measuring pH, ORP, ISE, EC, TDS, Salinity, Resistivity, and Temperature. Includes information on calibration, data logging, incremental methods, and USP compliance.
	Hanna HI98326 (DiST®9) Low and High Range Salinity Tester Datasheet Detailed specifications and features of the Hanna Instruments HI98326 (DiST®9) pocket-sized Salinity Tester, including its waterproof design, automatic temperature compensation, and dual pin graphite EC probe for accurate salinity measurements in various water types.
	Hanna Instruments EC and TDS Process Mini Controller Series Instruction Manual Comprehensive instruction manual for Hanna Instruments EC and TDS Process Mini Controller Series. Covers specifications, installation, operation, calibration, and maintenance for models like BL983313, BL983317, BL983320, BL983322, BL983327, BL983315, BL983318, BL983319, BL983321, BL983324, and BL983329.
	Hanna Instruments pHep HI 98107 Pocket-Sized pH Meter The Hanna Instruments pHep HI 98107 is a rugged, pocket-sized pH meter designed for accurate pH measurements. Features include a replaceable electrode, manual 2-point calibration, and a long battery life.