FPG Isoform Grab&Go 1200/1350 Heated/Heated
FPGWORLD.COM
Product Overview & Key Specifications
| RANGE | ISOFORM GRAB&GO |
| TEMP. TOP | HEATED/TILT FRONT |
| TEMP. BOTTOM | HEATED/OPEN FRONT |
| MODEL | I-GG-HH-12-13-A003 |
| INSTALLATION | FREESTANDING |
| HEIGHT | 1354mm |
| WIDTH | 1208mm |
| DEPTH BASE | 915mm |
| TEMPERATURE RANGE | +65°C - +80°C |
| RECOMMENDED CORE PRODUCT TEMPERATURE | +65°C - +80°C |
| ENVIRONMENTAL TEST CONDITIONS | 22°C / 65% RH |
Features
- High energy efficiency: 2.19 kWh per hour (average)
- Cabinet operating temperature range: +65°C - +80°C
- Recommended core product temperature: +65°C - +80°C
- Sleek black cabinet frame with silver pinstripe (default) on front, rear and doors
- 25,000 hour LED lighting system (colour: natural) at 2758 lumens per metre in both top and bottom displays
Tilt Front Heated Top Display
- Engineered with energy-efficient, fan assisted Thermofin heating technology to provide fast heat-up time and gentle heating for extended product shelf life
- Tilt front glass provides easy access for cleaning
Open Front Heated Bottom Display
- Fixed IWave shelf is brushed stainless steel and is fitted with ticket strips front and rear: 30mm (height) with caution decal applied. Shelf is supplied with 3 x 375mm removable aluminium drip trays, powdercoated black (default).
- FPG IWave heating technology uses low-wattage quartz infrared elements complemented with a heating coil in the base for even temperature distribution and extended shelf life
- Safer for consumers - display surfaces are maintained < +65°C
Operational Excellence
- Dual Action Doors (staff side) - doors both slide and swing for full-width access to the cabinet
- Constructed from stainless and mild steel with fully double-glazed, toughened safety glass for maximum energy efficiency, climate control and durability
- Fitted with an electronic controller for energy efficiency
- Fitted with unidirectional rollers and adjustable stabilisers
Visual Description
Illustration showing the FPG Isoform Grab&Go 1200mm width x 1354mm height unit. The top display is heated and features a tilt front, while the bottom display is heated and open front with an IWave shelf.
Options & Accessories
- Contact a FPG Sales Representative for their full range, including:
- Pinstripe colour
- Stainless steel product trays with three sides
- Stainless steel pie chutes
- Branded decals
- Rear door or end glass mirror application
- LED lighting colour: Warm white
- Lockable castors
Top Display
- Additional shelf
- Shelf trays: Toughened safety glass or brushed stainless steel. Colour and woodprint options available for steel shelf trays
Bottom Display
- Drip trays: Colour and woodprint options available
- Angled base insert
Sustainability and Standards
- Indicates sustainability benefits [heating symbol]
- Standards: CE, IEC, ASNZ FOOD Standards
- Please contact FPG to discuss requirements for meeting country-specific standards.
Technical Data
Heated Data
| TEMPERATURE RANGE | +65°C - +80°C |
| RECOMMENDED CORE PRODUCT TEMPERATURE | +65°C - +80°C |
| ENVIRONMENTAL TEST CONDITIONS | 22°C / 65% RH |
| HEATING | Fan assisted Thermofin, IWave low-wattage infrared quartz elements |
Electrical Data
| Feature | Value |
|---|---|
| MODEL | I-GG-HH-12-13-A003 |
| VOLTAGE | 220-240 V |
| PHASE | Single |
| CURRENT¹ | 15.1 A |
| E24H² (kWh) | 52.56 |
| kWh per hour (average) | 2.19 |
| IP RATING | IP 22 |
| MAINS CONNECTION | Fixed wiring³ |
| CONNECTION PLUG | N/A |
| LED LIGHTING HOURS | 25,000 |
| LUMENS PER METRE | 2758 |
| COLOUR | Natural |
Footnotes:
- ¹ Current is the maximum potential current draw at 240v with +5% element tolerance.
- ² Nominal power consumption per 24h. i.e: 230V at 0% energy tolerance.
- ³ Please see manual for more information.
Capacity, Access & Construction
| Feature | TOP DISPLAY | BOTTOM DISPLAY |
|---|---|---|
| DISPLAY AREA | 0.50 m² | 1.10 m² |
| LEVELS | Base only | 1 Shelf + Base |
| ACCESS FRONT | Tilt front | Open front |
| ACCESS REAR | Dual Action doors | Dual Action doors |
| REAR DOORS | 2 | 2 |
| CHASSIS CONSTRUCTION | Stainless 304 and mild steel | Stainless 304 and mild steel |
Dimensions
| Feature | Value |
|---|---|
| MODEL | I-GG-HH-12-13-A003 |
| H x W x D mm (Uncrated) | 1354 x 1208 x 915 |
| MASS (Uncrated) | - kg |
Note: Crated weights and dimensions vary. Please contact FPG for information on shipment.
Installation Notes & Diagrams
Installation Notes
- Designed to be installed as a stand-alone unit.
- Model cutout dimensions: I-GG-HH-12-13 models require 1218 x 920mm benchtop cutout. Joinery height 307mm (see product manual for installation guide).
Diagram Descriptions
- Plan View: Shows overall appliance dimensions (1354mm height, 915mm depth, 1208mm width), base width (1068mm), shelf width (1126mm), and required cutout dimensions (1218mm width, 920mm depth). Includes a 25mm allowance for cut out.
- Front Elevation: Displays the overall height (1354mm), appliance dimensions, and the configuration of the heated top display and heated bottom display with shelves.
- Section View: Illustrates the internal structure, including shelf heights, glass thickness, and heating elements. Shows dimensions for the top display (418mm height), bottom display (652mm height), and various internal depths and heights.
- Rear Elevation: Shows the cable exit location at the rear with a cable length of 3m and a 105mm clearance.
Further Information
- More information including technical data and installation guidelines is available from the Product Manual published on the FPG website.
- In line with their policy to continually develop, improve and support their products, Future Products Group Ltd reserves the right to change specifications and design without notice.
- For inquiries, please email sales@fpgworld.com or visit www.fpgworld.com for full contact details for your region.
- Document date: 09/24. © 2024 Future Products Group Limited.
Home - FPG | Food Display Solutions
Contact Us - FPG | Food Display Solutions
