Thule Kit 187082 Installation Guide for Volkswagen Multivan T7
Instructions for fitting the Thule Kit 187082 roof rack system to a Volkswagen Multivan (T7), 4-door MPV, model year 2022 onwards, specifically for vehicles equipped with fixpoint mounting.
Kit Contents
This kit is designed exclusively for vehicles with fixpoint mounting. ⚠️
KIT 1 (Main Components) ?
- Part 004 (x4)
- Part 195 (x4)
- Part 50229 (x1)
- Part 50603 (x4)
FOOT PACK 2 (Mounting Feet) ?
- Part 004 (x4)
- Part 195 (x4)
- Assembly Tool (x1) ?
Specifications and Safety Guidelines ?️
Maximum Load Capacity: 100 kg / 220 lbs ⚖️
Maximum Vehicle Speed: 130 km/h / 80 Mph ?
Recommended Speed with Load: 80 km/h / 50 Mph ?️
Torque Specifications:
- Foot Pack attachment to vehicle: 4 Nm ?
- Securing screws for foot pack: 8 Nm ?
Installation Steps ?
Step 1: Position Roof Rack Feet
Place the roof rack feet (Parts 004 and 195) onto the designated fixpoint mounting locations on the vehicle's roof. Ensure correct orientation.
Diagram Description: Illustrates the placement of four roof rack foot assemblies on the roof of a Volkswagen Multivan (T7). Each assembly comprises parts labeled 004 and 195, positioned over the vehicle's fixpoints.
Step 2: Foot Pack Preparation
Prepare the foot pack components for attachment. A specific tool is provided for this stage, with a recommended torque of 4 Nm.
Diagram Description: A detailed view of the foot pack (Parts 004 and 195) being assembled or prepared. An assembly tool is shown, and a torque value of 4 Nm is indicated for this part of the process.
Step 3: Assemble Foot Pack
Assemble the individual parts of the foot pack together.
Diagram Description: Shows the components of the foot pack being fitted together to form a complete unit.
Step 4: Apply Lubricant
Apply silicone lubricant to the relevant component as indicated to ensure smooth operation and proper sealing.
Diagram Description: A tube labeled "SILICONE" is shown, with lubricant being applied to a specific part of the foot pack assembly.
Step 5: Secure Foot Pack to Vehicle
Attach the assembled foot pack to the vehicle's roof fixpoints using the provided screws (Part 50603) and washers. Tighten these screws to a torque of 8 Nm using a torque wrench.
Diagram Description: Depicts the foot pack being securely fastened to the car roof. Four screws (Part 50603) and washers are used. A torque wrench symbol indicates the required torque of 8 Nm. Diagram A provides a close-up view of the screw and washer assembly being inserted into the foot pack and roof fixpoint.